Owner's Manual

10
WATER VALVE INSTALLATION
1. REMOVE THE BACK COVER
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
TOOLS YOU WILL NEED
CAUTION: Unplug the refrigerator power cord from the outlet.
INSTALLATION INSTRUCTIONS
Remove the back cover of the refrigerator
using a Phillips screwdriver.
Flat blade and
Phillips screwdrivers
3. ATTACH THE WATER VALVE
Fasten the water valve to
the back of the refrigerator
using one Phillips screw .
NOTE: Make sure the fill tube
connection on water valve is secure.
7
7
2. CONNECT THE WATER VALVE WIRE HARNESS
Facing the back of the refrigerator, locate the
wiring harness for the water valve at the lower
right side. Plug the connector of the water
valve harness onto the refrigerator terminals.
housing water valve
locker
locker
housing refrigerator bottom direction of combined
2
1
4 5
1
2
3
45
3
6
6
2 1
4
5
4