User's Manual

GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM
86
6.1.3.1 Example of Admin. Program
PROCEDURE
ADMIN PROGRAM START
PRESS FLEX KEY(1-12)
(1) When the user enter Admin. mode, LCD displays the first message.
Press a flex-key to select a main-menu among 12 main-menus.(If the
user program does not include LCR-package, the user cannot ente
r
main-menu 10)
STA PGM
ENTER STA RANGE
(2) The user selected the 2
nd
main-menu, “STATION BASE PROGRAM”,
by pressing the 2
nd
flex-key in step 1. Dial station range. (The second
station number must be more than or equal to the first station number)
STA PGM,100-100
PRESS FLEX KEY(1-8)
(3) And then, press a flex key(1-8) or
▲
/
▼
.
➀
Flex key(1-8):Select a sub-menu of
STA BASE PROGRAM
.
➁▲
:Move to the next main-menu,
CO LINE BASE PROGRAM
.
▼
:Move to the previous main-menu,
INITIALIZATION
.
STA PGM,100-115,ATTRIBUT
PRESS FLEX KEY(1-10)
(4) If the user press a flex key 1, the LCD displays as the left side.
STA PGM,100-115, DND
YES
(5) If the user press a flex key 1, the LCD displays as the left side.
And then press a flex key 1 to change the current value. Press
[HOLD/SAVE]
to update the database permanently.
- 
▲
/
▼
: Go to the other same level menu.
-
[TRANS/PGM]
: Go to the Admin. start menu.
-
[REDIAL]
: Go to the 1 level upper menu.