Owner's Manual

OPERATION
25
Operation
with
RADIO
Presetting
the radio stations
You can
preset
50 stations for FM and AM.
Before
tuning,
make sure that
you
have turned the vol-
ume down to the minimum level.
Press TUNER/BAND on the remote control to
show either FM or AM in the
display
window. Or
Press TUNER on the front
panel.
Every
time
you press
this
button,
AM and FM
changes alternately.
2
Select a station
you
want
by pressing
TUNING
(-/+)
on the front
panel
or / on the
remote control.
otes
?
Automatic
Tuning
Press TUNING
(-/+)
or / for more than 0.5
second.
-
Scanning stops
when the unit tunes in a station.
?
Manual
Tuning
Press TUNING
(-/+)
or /
briefly
and
repeatedly.
Press PROG./MEMO. on the remote control.
A
preset
number will flash in the
display
window.
Press / on the remote control to select the
preset
number
you
want.
Press PROG./MEMO.
again.
The station is stored.
Repeat steps
1
(or 2)
to 5 to store other stations.
To clear all memorized stations
Press and hold PROG./MEMO. on the remote control for
about two
seconds,
"ERASE ALL"
appears
in the
display
window and then
press
PROG./MEMO. on the remote
control,
the stations are cleared.
For
your
reference
If all stations have
already
been
entered,
"FULL"
message
will
appear
in the
display
window for a
moment and then a
preset
number will flash.
To
change
the
preset
number,
follow the
steps
4-5 .
To recall
preset
numbers
Press and hold / on the remote control until the
desired
preset
number
appears
or
press
the button
repeatedly.
Listening
to the radio
Press TUNER/BAND on the remote control to
show either FM or AM in the
display
window. Or
Press TUNER on the front
panel.
The last received station is tuned in.
2
Press / on the remote control
repeatedly
to select the
preset
station
you
want.
Each time
you press
this
button,
the unit tunes in
the next
preset
station.
Adjust
the volume
by rotating
VOLUME
CONTROL KNOB
(or pressing
VOLUME
(-/+)
on
the remote
control) repeatedly.
To listen to
non-preset
radio stations
?
For manual
tuning,
see "Manual
Tuning".
?
For automatic
tuning,
see "Automatic
Tuning".
To select a
preset
radio station
directly
You can use the number buttons on the remote control
to select a
preset
radio station
directly.
For
example,
to listen to
preset
station
4,
press
4 on the
remote control. To listen to
preset
station
19,
press
1
then 9
(within
3
seconds).
To turn the radio off
Press POWER to turn off the unit or select another
function mode
(DVD/KARAOKE,
TAPE,
AUX or
USB).
For
your
reference
?
If a FM
program
is
noisy
Press ST./MO.
repeatedly
so that that
" "
disappears
in the
display
window. There will be no
stereo
effect,
but the
reception
will
improve.
Press
ST./MO.
again
to restore the stereo effect.
?
To
improve reception
Reposition
the
supplied
antennas.