Owner's Manual

Connections
8
Connecting
to
Optional Equipment
CHANNEL
4
3
WIRELESS MIC
ANTENNA
Pr
Pb
2
1
OFF ON
[Connecting
to an
amplifier equipped
with two
channel
digital
stereo
(PCM)
or to an Audio/
Video receiver
equipped
with a multi-channel
decoder
(Dolby DigitalTM,
MPEG
2
or
DTS)
Connect the OPTICAL OUT
jack
on the unit to the
OPTICAL IN
jack
on
your amplifier.
Use an
optional
audio cable.
Caution:
Due to the DTS
Licensing agreement,
the
digital output
will be in DTS
digital
out when DTS audio stream is
selected.
The sound is muted
during playback
on an audio CD
recorded in dts.
Notes
--
If the audio format of the
digital output
does not
match the
capabilities
of
your
unit,
the DVD Karaoke
will
produce
a
strong,
distorted sound or no sound at
all.
--
Six Channel
Digital
Surround Sound via
digital
con-
nection can
only
be obtained if
your
unit is
equipped
with a
Digital
Multi-channel decoder.
--To see the audio format of the current unit in the On-
Screen
Display, press
AUDIO.
Connecting
to the Wireless
microphone
antenna
-
LM-KW3930Q
model
only
When
you
use the wireless
microphone,
connect the
supplied
wireless
microphone
antenna to the wireless
microphone
antenna
jack
of the unit.
CHANNEL
4
3
WIRELESS MIC
ANTENNA
Pr
Pb
2
1
OFF ON
Wireless
microphone
antenna
Setting
the Wireless
microphone
Channel
-
LM-KW3930Q
model
only
If there is a similar wireless
microphone product
nearby,
interference
may
occur. In this
case,
change
the channel switch to other
channel,
and turn off the
power,
then turn on
again.
By using
the
Channel
Switch,
set the same
channel.
You can set the channel
change
with 10
types.
CHANNEL
4
3
2
1
OFF ON
[Rear panel
of
the
unit]
ON
[Wireless microphone]
Open
the cover.
1
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
2
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
3
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
4
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
Channel switch number
Channel number
(OPTIONAL)
LM-KW3930Q
model
only
(OPTIONAL)
LM-KW3930Q
model
only