HISPANO_LM-M140(ENG)-31F MINI HI-FI System OWNER'S MANUAL MODEL : LM-M140A/D/X LMS-M140 Please read this manual carefully before operating your set. Retain it for future reference. Designs and notice for specifications improvement.
Precautions CAUTION CAUTION Use of controls procedures RISK OF ELECTRIC or adjustments or performance of specified herein may other than those result in hazardous radiation exposure. SHOCK DO NOT OPEN Laser CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE component in this product is capable of emitting radiation exceeding the limit for Class 1. COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Ta ble of Contents INTRODUCTION OPERATION Precautions...............................2 Presettingtheradiostations.................11 TableofContents..........................3 Listeningtotheradio......................11 BeforeUse................................4 TapePlayback............................12 BasicPlayback..........................12 ToStopPlay...........................12 TapeCounterReset......................12 .12 ToPlayFastRewindorFastForward. Dubbing...............................
Before Use Precautions Safety Handling When The Notes the unit original shipping packing in handy. For maximum protection, re-pack as it was originally packed at the factory. ? the ? Do not use volatile such liquids, contact with the unit for They will leave marks on plastic products or in Remote control battery Detach the the surface.
Front Panel/Rear Panel 16 15 14 123 FM GND INTRODUC AM 13 21 12 11 4567 AU 20 X RL 10 9 + L 8 - 19 - R + 17 1. POWER 2. ? ( STANDBY/ON) (DISC 1, DISC 2, DISC ? DISC SKIP button ? CD OPEN/CLOSE ( MODE/RIF button 4. ? RDS button ? CD PAUSE ? NORMAL DUBBING ? HIGH DUBBING ? CD SYNC. button ? COUNTER RESET ? PLAY MODE button 6. 3) (CD )/SET (NOR-DUBB.) (HI-DUBB.) button (COUNT.
Remote Control AUX button POWER button PRESET / ( ) TUNER/BAND button buttons MUTE button CD FUNCTION buttons PLAY/ PAUSE ( STOP( CD ) ) button ? button ? VOLUME CONTROL buttons ? REPEAT button ? ) / DISC SKIP (D.SKIP) TAPE FUNCTION buttons button RECORD/ RECORD PAUSE ? PATTERN button ? XDSS button ? button ? (EQ PATT.) SURROUND (SURR.
Connections Speaker System Connect the Connection speakers using the supplied speaker cords by matching the colors of the terminals and those possible surround sound, adjust the speaker parameters (distance, level, etc.). of the cords. To obtain the best ANTENNA A U X RL INTRODUC Red + L - Black - R + Red Right Speaker Left Speaker otes ? Be are sure to match the reversed, speaker cord to the appropriate terminal on the components: + to + and -- to --.
Audio Adjustment the Setting voltage (OPTIONAL) the CLOCK Setting 1 the clock CLOCK for - 2 When the The hours Select a pressing requires setting, press more than 2 seconds.) begin to blink. 24 hour cycle or 1 and hold To specify used, the power is automatically time has specified the time delay automatically elapsed. before the power is turned off, press SLEEP. In the display window you can turns off see that the means system after 90 minutes.
Audio Adjustment Timer Function The unit set the clock function in power on/off state. can With the TIMER function you reception and recording, CD and play source recording have the radio can play, tape play turned on or auxiliary and off at the time desired. 1 Press CLOCK to check the current time. 6 7 8 Press SET to confirm the hour to switch Set the minute to switch PRESET DOWN/UP 2 TUNER-CD-TAPE flashes in the setting mode. display window in turn.
RDS Function - OPTIONAL About RDS Programme Search (PTY) This unit is A which casts with equipped with RDS (Radio Data System), brings a wide range of information from FM radio. RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musi- ability to encode broadProgramme Type (PTY) codes that indicate type of material being broadcast.
Presetting You preset can make the radio stations 50 stations for FM and AM. Before 1 sure (or TUNER/BAND on the remote select the frequency (AM or FM) you to want. Every time you press changes alternately. 2 this Press and hold PROG./MEMO. the front on panel change. For your reference If all stations have already been Automatic Tuning Press TUNING DOWN/UP for Scanning stops when Manual Tuning 4 more than 0.5 seconds.
Tape Playback Basic To Playback Press TAPE 1/2 to select TAPE 1 1 2 3 4 ("NO TAPE" appears in the Open cassette TAPE 1 PUSH EJECT Insert one or or TAPE 2. Tape Counter (or 2) by pushing tape side or : to To Play stops plays front reverse(backward play) side, stops automatically. or Three repeatedly times front and reverse ) point you want. to tape tape. Press TAPE 1/ 2.
CD Playback Basic Playback Press POWER 1 To Search STANDBY/ON) ( to turn on the at the Press the CD button on the front panel to enter the CD mode. If no point 3 otes drawer, "NO DISC" OPEN/CLOSE( the left on play a MP3 file. To Go to the next discs displayed. and OPEN/CLOSE) the disc into the disc tray. place The disc button then release you want.
CD Playback To Repeat Play To play one Press REPEAT - track once repeatedly play one during playback. display window. disc Program Play You can - "REPEAT 1 To play repeatedly all tracks Press REPEAT - once more all discs until Press REPEAT window. ? again during program play. "REPEAT ALL DISC" appears in the display window.
Tr oubleshooting Check the following guide for the possible cause of a problem before service. contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? No sound. ? The audio cables ? are not connected Plug the power securely. Connect the audio cable into the securely. The ? speaker to the wrong The unit does not start playback. jacks securely. The power of the external ment is switched off.
Specifications MODEL SECTION Power [Genral] Power Refer to the back consumption 40W 6.3 External dimensions FM [Tuner] supply Mass [CD] (MW) AM [Amp] [TAPE] LM-M140A/D/X (W x H x D) Frequency response Signal-to-noise ratio Dynamic range Tuning Range Intermediate Frequency Signal to Noise Ratio - 330 x x 360 mm 18000 Hz 70 dB 70 dB 87.5 108.