Owner's Manual

7
Connections
PREPARATION
Connecting to Antenna
Connect the supplied FM/AM antennas to listen to the
radio.
• Connect the AM loop antenna to the AM antenna
connector.
• Connect the FM wire antenna to the FM antenna
connector.
otes
• To prevent noise pickup, keep the AM loop antenna
away from the unit and other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
COMPONENT
Pr
Pb
Y
VIDEO OUT
S-VIDEO
OUT
OPTICAL
IN
EURO AV
TO TV
REAR
R (8 )
REAR
L (8 )
CENTER
(8 )
FRONT
R (4 )
FRONT
L (4 )
WOOFER
PRE-OUT
AUX IN
AM(MW) loop
antenna (aerial)
(Supplied)
For AM(MW) reception, connect the
loop antenna (aerial) to the terminal
marked AM
FM wire
antenna
(supplied)
Connecting to Auxiliary Equipment
You can use VCR or other unit connected to the AUX
connector.
This unit receives the analog signal from auxiliary
equipment.
1
Connect a VCR or auxiliary device, etc to the
AUX connector.
22
Press the AUX button on the front panel or the
remote control until the “AUX” indicator is
displayed in the display window.
REAR
R (8 )
REAR
L (8 )
CENTER
(8 )
FRONT
R (4 )
FRONT
L (4 )
WOOFER
PRE-OUT
AUX IN
VIDEO
OUTIN
AUDIO (L)
AUDIO (R)
Connecting to Optional Equipment
You can use an optical output of a Digital Device to the
OPTICAL IN connector.
This unit receives the optical digital signal from
optional
equipment.
Pr
Pb
Y
S-VIDEO
OUT
OPTICAL
IN
EURO AV
TO TV
OPTICAL
OUT
COMPONENT
(PROGRESSIVE SCAN)
VIDEO OUT
1
Connect an optical output of DVD Player (or
Digital Device etc) to the OPTICAL IN connector.
22
Press the AUX button on the front panel or the
remote control until the “OPT IN” indicator is
displayed in the display window.
DVD Player
(or Digital Device,
etc)
VCR (or Auxiliary
Device, etc)
To AUDIO IN
To AUDIO OUT