Owner's Manual

13
Operation
with
RADIO
Presetting
the radio stations
You can
preset
50 stations for FM and AM. Before
tuning,
make sure that
you
have turned down the
volume to the minimum.
Press FUNCTION on the remote control to
show either FM or AM in the
display
window. Or
Press TUNER on the front
panel.
Every
time
you press
this
button,
AM and FM
changes alternately.
2
Select a station
you
want
by turning
MULTI JOG on the front
panel
or
.m
/
M>
on the remote control.
otes
Automatic
Tuning
Press TUNING UP/DOWN on the front
panel
(or
.m/M>
on the remote
control)
for more
than 0.5 second.
-
Scanning stops
when the unit tunes in a station.
Manual
Tuning
Turn MULTI JOG on the front
panel
(or
.m
/
M>
on the remote
control) briefly
and
repeatedly.
3
Press PROG.MEMO on the front
panel
.
(or
PROGRAM/MEMO on the remote
control)
A
preset
number will flash in the
display
window.
4
Press PRESET UP/DOWN on the front
panel
buttons
(or
PRESET/FOLDER
( )
on the
remote
control)
to select the
preset
number
you
want.
5
Press PROG.MEMO on the front
panel again.
The station is stored.
6
Repeat steps 1(or 2)
to 5 to store other sta-
tions.
To clear all the memorized stations
Press and hold PROG.MEMO on the front
panel
for about two
seconds,
"CLEAR"
appears
on the dis-
play
window and then
press
STOP/CLEAR
(x),
the sta-
tions are cleared.
For
your
reference
If all stations have
already
been
entered,
FULL
message
will
appear
in the
display
window for a moment and then
a
preset
number will blink. To
change
the
preset
number,
follow the
steps
4-5.
To recall
presets
Press and hold PRESET UP/DOWN buttons on the
front
panel (or
PRESET/FOLDER
( )
on the
remote
control)
until the desired
preset
number
appears
or
press
it
repeatedly.
Listening
to the radio
1
Press FUNCTION on the remote control to
show either FM or AM in the
display
window. Or
Press TUNER on the front
panel.
The last received station is tuned in.
2
Press PRESET UP/DOWN buttons
(or
PRESET/FOLDER
( )
on the remote
control) repeatedly
to select the
preset
station
you
want.
-
Each time
you press
the
button,
the unit tunes in
one
preset
station at a time.
3
Adjust
the volume
by rotating
VOLUME
CONTROL KNOB
(or pressing
VOLUME
( )
on the remote
control) repeatedly.
To listen to
non-preset
radio stations
?
For manual
tuning,
see "Manual
Tuning".
?
For automatic
tuning,
see "Automatic
Tuning".
To select a
preset
radio station
directly
You can use the number buttons on the remote control
to select a
preset
radio station
directly.
For
example,
to listen to
preset
station
4,
press
4 on the
remote control. To listen to
preset
station
19,
press
1
and then 9
(within
3
seconds)
To turn the radio off
Press POWER to turn off the unit or select another
function mode
(CD,TAPE,
AUX or
USB).
For
your
reference
?
If an FM
program
is
noisy
Press ST./MONO so that "MONO"
disappears
on the
display
window. There will be no stereo
effect,
but the
reception
will be
improved.
Press ST./MONO
again
to
restore the stereo effect.
?
To
improve reception
Repose
the
supplied
antennas.
/
/
/
/
OPERATION