Owner's Manual

PAGE 18
CD/VCD OPERATION
Advanced
Playback
(Continued)
Repeat Playback
NOTE: The
repeat play
does not work in PBC ON status
of the VIDEO CD with PBC function
(Version 2.0).
To
play
one track
repeatedly
Press REPEAT once
during playback.
-
"REPEAT 1"
appears
in the
display
window.
To
play
one disc
repeatedly
Press REPEAT
again during playback.
-
"REPEAT 1 DISC"
appears
in the
display
window.
To
play
all tracks on all disc
repeatedly
Press REPEAT once more
during playback.
-
"REPEAT ALL
DISC"appears
in the
display
window.
To cancel
repeat play
-
Press REPEAT several times until
"repeat
indicator"
disappears.
Program repeat play
?
Press REPEAT once
during program play.
-
"REPEAT 1"
appears
in the
display
window.
(One
track
repeat)
?
Press REPEAT
again during program play.
-
"REPEAT ALL
DISC"appears
in the
display
window.
(All program repeat)
Program Play Setup
You can
arrange
the order of the tracks on the discs and
create
your
own
program.
The
program
can contain
up
to 20 tracks.
otes
The
program playback
does not work in PBC ON status
of the VIDEO CD with PBC
function(Version 2.0).
This function is not available to MP3 discs.
1
Press PROG./MEMO
(or
PROGRAM
on
the
remote
control)
in
the
Stop
mode.
2
Press
D.SKIP or DISC DIRECT PLAY
(DISC1/2/3)
to select the disc.
3
Use
PREV./NEXT or
turn
MULTI
JOG
SHUTTLE
to select the track.
In case of
using
NUMERIC
(0~9)
button,
press
"0" and "3".
4
Press PROG./MEMO
(or
PROGRAM
on
the
remote
control).
5
Repeat
steps
1~5 to select additional discs
and tracks.
6
Press
PLAY
()
.
To check
program
contents
Press
PROG./MEMO
(or
PROGRAM
on the remote
control)
in
Stop
mode.
-
A
disc,
track and
program
number will be
displayed.
To clear
program
contents
Press
PROG./MEMO
(or
PROGRAM
on the remote
control)
in
stop
mode. Then
press
CLEAR on the front
panel
or STOP
( )
on the remote control.
To add
program
contents
1. Press
PROG./MEMO
(or
PROGRAM
on the remote
control) repeatedly
in the
program Stop
mode until
"Disc Number" blinks.
2.
Repeat steps
2~5 as shown to the above.
To
modify program
contents
1. Use
PROG./MEMO
(or
PROGRAM
on the remote
control)
to
display program
number
you
want to mod-
ify.
2.
Repeat steps
2~5 as shown to the above.