Installation Manual

8 Multi Air Conditioner
Installation of Indoor, Outdoor Unit
Installation of Indoor, Outdoor Unit
Read completely, then follow step by step.
Select the best location
Indoor unit
1. Do not have any heat or steam near the unit.
2. Select a place where there are no obstacles
in front of the unit.
3. Make sure that condensation drainage can be
conveniently routed away.
4. Do not install near a doorway.
5. Ensure the spaces indicated by arrows from
the wall, ceiling, fence or other obstacles.
6. Use a stud finder to locate studs to prevent
unnecessary damage to the wall.
Outdoor unit
1. If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.
2. Ensure that the spaces indicated by arrows
around front, back and side of the unit.
3. Do not place animals and plants in the path
of the warm air.
4. Take the air conditioner weight into account
and select a place where noise and vibration
are minimum.
5. Select a place so that the warm air and noise
from the air conditioner do not disturb neigh-
bors.
Rooftop Installations:
If the outdoor unit is installed on a roof struc-
ture, be sure to level the unit. Ensure the roof
structure and anchoring method are adequate
for the unit location. Consult local codes regard-
ing rooftop mounting.
Unit : mm(inch)
more than 200
(7-7/8)
more than 500
(19-11/16)
more than 1500
(59-1/16)
more than 500
(19-11/16)
more than 700
(27-9/16)
more than 300
(11-13/16)
more than 300
(11-13/16)
more than 300
(11-13/16)
more than 300
(11-13/16)
more than 600
(23-21/32)
more than 600
(23-21/32)
Unit : mm(inch)
Unit : mm(inch)
more than 600
(23-21/32)
more than 700
(27-9/16)
more than 600
(23-21/32)
CAUTION: Install the indoor unit
on the wall where the height from
the floors more than 1.5m(4.9ft).