Owner's Manual

Operation and settings 17
2. Move the camera to a point you wish.
3. Click the [Add] button.
4. Repeat the steps 1 to 3 to add other positions.
» To remove the preset position
1. Enter the memorized preset index number.
2. Click the [Remove] button. The preset will be deleted.
» Changing a picture in a preset position
1. Enter the memorized preset index number.
2. Click the [Go to preset] button. The camera moves to the
preset position and the picture of the camera in that position
appears on the monitor.
Preset tour
A preset tour is composed of a group of preset positions that the
operator can link together in a sequence.
1. Click the [Play] button to start the preset tour.
2. Click the [Stop] button to stop the preset tour.
Note:
If you control the PTZ, the preset tour will be stopped.
Preset group tour
You can create a group using preset positions that are registered
already.
» To set the group
1. Enter the group number in the [Group index] option.
2. Enter the preset index number in the [Preset index] option.
3. Click the [Add] button.
4. Repeat the steps 2 to 3 to add other preset index number.
5. Repeat the steps 1 to 4 to set the other group index.
» To remove the preset index from the group
1. Enter the group number in the [Group index] option.
2. Enter the preset index number in the [Preset index] option.
3. Click the [Remove] button.
4. Repeat the steps 2 to 3 to remove other preset index number.
5. Repeat the stpes 1 to 4 to set the other group index.
» To tour the group
1. Enter the group number in the [Group index] option.
2. Click the [Play] button to start the group tour.
3. Click the [Stop] button to stop the group tour.
» To delete a group
1. Enter the group number in the [Group index] option.
2. Click the [Clear] button. The group will be deleted.
Auto pan
You can play the camera with auto pan function.
» To set the Auto Pan position
1. Enter the index number you wish to register.
2. Move the camera to the desired point.
3. Click the [Add] button.
4. Repeat the steps 1 to 3 to add other index number. You can set
the Auto pan index number up to 8.
» To play the auto pan
1. Click the [Play] button to start the Auto Pan function.
2. Click the [Stop] button to stop the Auto Pan function.
Note:
If you click the [CLEAR] button, all of Auto pan position will be deleted.
================================================