Owner's Manual

Operation and settings 13
Focus (Applicable model: LNB7210)
> Auto: Select [Auto] option on the [Focus] menu, then select
the following mode.
- Focus Push: This function will be activated automatically
to adjust the focus.
- Focus Reset: The focus position is located at factory
default position.
- Manual: Use , , , , or button to adjust the
focus position manually.
Note:
• When you mount the lens, press [Focus Reset] button to
reset your focus.
• After adjusting the focus approximately,
press [Focus Push] button to adjust the lens sharply into
focus.
> Day/Night AF: You can set the AF function when the
Day/Night mode is converted.
- High / Medium / Low : Select [High], [Medium] or [Low]
of the AF operating range. When [High] is selected, the
widest AF operating range is set.
- OFF: Not used the AF function when the Day/Night
mode is converted.
Exposure
> IRIS: Select the desired lens iris value for camera exposure.
Select [IRIS] option on the [Exposure] menu, then select a value.
- Auto: The lens iris is set automatically.
- Manual: Select this option when use the lens for
adjusting IRIS manually.
Note:
When the [Manual] is selected, IRIS is fixed on full open
state. In this case, adjust the brightness by shutters.
> BLC: Camera’s backlight compensation feature helps
alleviate issues of visibility in high contrast areas.
Note:
When the [WDR] is set to [On], the BLC is deactivated.
> Dynamic Range Enhancer: Adjusts the contrast of the image
automatically to provides bright and clear images.
Note:
When the [WDR] is set to [on], the [Off] option of [Dynamic
Range Enhancer] is deactivated. It adjusts the level of the
[WDR].
> De-Fog: Select the value to remove the misty fog of image.
Note:
If the [De-fog] function operates while the [WDR] is turned
on, occurs only the simple effects as On/Off without
a difference in the operating level (High/Middle/Low).
Because the WDR includes the auto-adjust De-fog.
> AGC: If the images are too dark, change the maximum [AGC]
value to make the images bright.
> Brightness: Adjust the brightness of images.
> Shutter Speed: Select the desired shutter speed for camera
exposure. You can change the shutter speed to higher speed
to capture fast-moving subjects, though the image becomes
darker.
Note:
When the [WDR] is set to [on], [Minimum] is deactivated and
adjusted automatically.
Minimum
Shutter
1/10 000 1/5 000 1/2 500 1/1 500 1/1 000
1/700 1/500 1/480 1/400 1/360
1/300 1/250 1/240 1/180 1/150
1/120 1/100 1/60 1/50 1/30
1/25