P/No.: 3828A20157A After reading this manual, Printed in Korea keep it in a place easily accessible to the user for future reference.
ENGLISH LG Floor Standing Type Air Conditioner LG OWNER'S MANUAL IMPORTANT Please read through this manual. It contains valuable information about your air conditioner. This manual may help save time and money by explaining proper product maintenance and preventing improper use. PRECAUTIONS Pay close attention to precautions in order to prevent potential hazards and damage from misuse or improper installation. LG is not responsible for any damages caused by misuse of the product.
F 1. Safety Precautions 2. Operating Your Records or Write the model and serial numbers here: Model # a. Features and Instructions Specifications b. Indoor Unit Controls and Indicators c. Name and Function-Remote Control d. Air conditioner Serial # You can find them on a label on the side of each unit. Dealer's Name Date Purchased Operation 3. Care and Maintenance 4.
Safety Precautions Precautions To prevent injury and property damage, follow these instructions. Incorrect indicated operation due to ignoring instructions by the following symbols. will cause WARNING This symbol shows the CAUTION This symbol indicates the harm possibility the seriousness of which is damage, or of death possibility of or injury serious or ENGLISH injury. damage to property.
CAUTION CAUTION ? Contact the authorized Service technician for ? Contact the installer for installation of this unit. ? The air conditioner is not intended for ? The ? ? repair or maintenance of this unit. use by young children or infirm persons without supervision. appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
Operating Features and Instructions Specifications Features 1 Design for cooling 2 Super 3 Micom control energy & Heating efficiency 4 Whisper quiet operation 5 Wireless remote control 6 2 7 Removable air filter 8 Anti-Bacteria filter 9 3 minutes 10 Jet 11 Cool delay circuit operation Energy saving 12 Auto restart 13 Plasma Air Purifying system (CA/HA/ZA MODEL) cooling speeds Specifications Air Outlet Vent Remote Signal Receptor Air Intake Vent (Rear) Air Intake Ven
Operating Indoor Unit Controls and Indicators Instructions Features of the Function 13719 6 Module Setting 12 14 818 139 11 JET COOL A/CL 6 12 14 8 11 JET COOL A/CL ROOM SET ROOM SET 10 Air Cleaning 16 Temp. Mode 2 Fan 15 On/Off 3 1 4 17 5 10 Speed Fan START/STOP BUTTON Operation and 2 3 3 1 17 10 JET COOL OPERATION LAMP stops when the button is pressed pressed again.
Operating Name and Function-Remote Control Instructions The remote control transmits the signals to the system. ENGLISH Feature of the Remote Control Signal Transmitter Transmits the signals 1 1 ? to the Floor Standing Type air conditioner 2 14 2 Operation Display 3 Timer Set Button 8 A/CL ? 9 345 of the Remote Control Each time the button is pressed, the following process.
Remote Control How to mount on a Preparation wall Use the 1 screws to secure the holder to the wall or attach the holder side of indoor unit. To insert the remote control to the holder. 2 Insert Pull How to insert batteries 1 Remove the cover from the back of the ? ? Slide the cover according to the are arrow Be sure that the (+) and (-) directions Be sure different from are ? correct. ? rechargeable dry cells in shape, dimensions, and performance.
Operating Air conditioner Instructions ? How to use the Each time the Operation Operation operation Mode Button Mode Selection Button is pressed, the Operation Mode is shifted in the arrow Mode Cooling Operation Soft Dry Operation Heating Operation (Heat Pump Model) Mode Cooling Operation Auto Soft Operation Dry Operation (Cooling Model) How to ? use Each time the Fan the Fan speed Button is speed Button pressed, the Fan speed is shifted in the arrow direction.
Mode Cooling Operation Press the 1 Start/Stop Button. On/Off 2 Select Cooling Operation.Press the Operation Operation Button on the remote controller. Mode Selection Button. Press the Cooling Mode A/CL Set the 3 The temperature lower than the room temperature. temperature can be set within a range of 16°C~30°Cby 1°C. Temp. To raise the To lower the 4 When you finish the temperature temperature temperature setting. After 4 seconds SET 5 Set the Fan ROOM Speed.
Soft 1 Dry Operation Press the Start/Stop ENGLISH Button. On/Off 2 Select Soft Press the Press the Dry Operation. Operation Mode Selection Button. Soft Dry Operation Button on the remote controller. Mode A/CL 3 Set the The temperature lower than the room temperature. temperature can be set within a range of 16°C~30°Cby 1°C. Temp.
Jet Cool 1 Operation Press the Start/Stop Button. On/Off 2 Press the Jet Cool button to high super fan speed on operate the speed cooling mode and the unit will operate in cooling mode. JET COOL 3 To cancel the Jet Cool room or mode, press the Jet Cool button again or the fan speed button or the temperature setting button and the unit will operate in high fan speed on cooling mode.
Heating Operation Mode(Heat Pump 1 Press the Start/Stop Model Only) ENGLISH Button. On/Off 2 Select heating Operation. Operation Mode Selection Button. the Heating Operation Button on the Press the Press remote controller. Mode A/CL 3 Set the The temperature lower than the room temperature. temperature can be set within a range of 16°C~30°Cby 1°C. Temp. 4 Set the Fan To raise the temperature To lower the temperature SET Speed.
Electric Heater 1 Press the Operation Mode(Optional) Start/Stop Button. On/Off Select 2 heating + E/heater Operation. Operation Mode Selection Button. Press the Heating Operation Button on the remote controller.(When the Press the unit operates in heating mode.) Electric Heater Mode A/CL A/CL Set the 3 The temperature lower than the room temperature. temperature can be set within a range of 16°C~30°Cby 1°C. Temp.
Auto Operation Mode(Cooling Model Only) Press the 1 Start/Stop ENGLISH Button. On/Off Select Auto 2 Operation. Operation Mode Selection Button. Auto Operation Button on the remote controller. Press the Press Mode A/CL Set the 3 The temperature upper than the room temperature. temperature can be set within a range of -2~2by 1 level. Temp. Cold (This indication will be shifted to the initial Auto Mode To raise the To lower the Display Cool state after 4 Proper Warm seconds.
Energy Saving Mode(Cooling Operation Only) 1 Press the Start/Stop Button. On/Off 2 3 Select You Energy Saving can mode. select this function during the operation To cancel the operate on Energy Saving mode, press Cooling/Auto/Soft Dry mode. the of Cooling/Auto/Soft Dry. Energy Saving button again and the unit will Auto restart In case the power function to comes on again after a power failure, Auto Restarting Operation is the to the previous operating conditions.
Fan Operation Press the 1 Mode (CL/HL/ZL MODEL) Press Fan Start/Stop 2 Button. On/Off ENGLISH Button. Mode Set the Fan 3 Operation Speed. Fan Speed Low High Each time the Fan Fan Speed Speed Button is mode is shifted in the pressed, arrow the direction. Airflow Direction Procedure Press the 1 Start/Stop Press the Auto Button. 2 louvers will Swing Button and swing left and right.
Plasma Air Air 1 Purifying Operation (CA/HA/ZA MODEL) Purifying Operation only Press the Plasma Air 1 Procedure Purifying Operation Start/Stop Button. Air Cleaning A/CL (Operation will start when the button is Select Fan 2 The display pressed, and stop when the button is pressed again.) speed. shows low fan speed at the initial condition.
OFF Timer Setting 1 Press the Procedure(OFF TIMER Setting, Start/Stop or CANCEL) ENGLISH Button. On/Off Press the Timer Button. 2 A/CL ? ? 3 If you press the If you select ' button, the selected off timer is displayed as follows; ', the Off Timer function will be cancelled. When you finish the Off Timer setting, the Timer indicator After 4 seconds lights off. After 4 seconds SET 4 During off-timer operation displayed.
Care and Care and Maintenance Maintenance CAUTION: Before performing any the During maintenance, turn off the main power to the season Cleaning of the air filters. Recommended about once every two weeks Remove the Air Filter. Take hold of the tab and remove the filter. Clean. To remove the dust ? vacuum ? cleaner, or pull slightly forward Don't wash with water. Wipe soft Remove the Air Cleaner. Take hold of the tab and remove the air cleaner.
Troubleshooting Tips! Before you call for service... Save time and money! Check the or following points before requesting repairs service.... If the fault or persists, please contact your dealer service center. Case Does not See page Explanation operate.
MEMO
