www.lg.
personal injury Failing to follow instructions and operating the product incorrectly will cause harm or damage. The severity of the possible consequences is indicated by the following symbols. property The meaning of the symbols used in this manual is shown below. This is the WRONG thing to do. Don't use a damaged power cord or plug, or a loose or damaged socket. Doing so may cause an electric shock or fire. the product. Doing so may cause electric shock or product failure.
Do not place heavy objects on top of the power cord, or bend or pinch the cord. Doing so could result in electric shock or fire. The heat generated will cause electric shock or fire. Doing so may cause an electric shock or fire. Doing so will cause electric shock or machine malfunction. Pull the plug out using the plug head not the cord. Do not unplug while hands are wet. Failure to follow this warning could result in electric shock or fire.
If a gas leak occurs, ventilate the room well before operating the unit. in a damp Doing so will result in electric shock. Failing to do so may cause damage and electric shock. Failure to do so may cause explosion and fire. If the inside of the unit needs cleaning, can cause corrosion or damage to the unit. Do not use this appliance for specialized purposes such as cooling pets, foods, precision machinery or art objects. This unit is not intended as a precision refrigeration system.
If fluid from the batteries in the remote leaks out and comes in contact with your skin or clothes, wash well with clean water. Discontinue use of the remote if the batteries have leaked. The chemicals in the batteries could cause burns or other health hazards. electric shock, fire, or death. If you eat the fluid from inside the remote's batteries, brush your teeth and see a doctor. Discontinue use of the remote if the batteries have leaked.
The Easy-to-read white LED display shows the operating state. Digital buttons(simple push Buttons) make changing settings quick and easy. Before moving the aire conditioner, drain the internal water in the collection tank completely using the Drain Outlet.
Adjust the set temperature up or down, or adjust the timer delay time. Removes moisture from the heat exchangers and helps prevent odor from forming. This function can be activated from the remote only. Switches the temperature display between degrees Celsius (ºC) and degrees Fahrenheit (ºF). If there is a power failure during operation, the unit will resume operation with the same settings as before the power failure.
Plug the power cord into its own dedicated, properly grounded outlet . Do not plug Other appliances into the same outlet; this could overload the outlet and create a fire hazard. Make sure the air conditioner and cord are positioned where they do not create a tripping hazard and will receive adequate ventilation. Do not place the air conditioner directly next to furniture or objects that could block the vent openings. Do not bend the hose downward when window installation kit is not applied.
Press down on the arrow and slide the battery cover on the back of the remote, then you can remove the cover. Insert two new AAA alkaline batteries into the battery compartment, being sure to note the proper polarity. Your air conditioner has a special place for convenient storage of the remote control. See the drawing to the right. In order to avoid losing the remote, have to put the remote inside of the storage niche with button portion facing outside, when remote not in use.
You can see the active mode on the LED Display.
FAN SPEED In COOL and DRY modes, the / (TEMP/TIMER) buttons adjust the set temperature up to 86°F (30°C) or down to 60°F(16°C), in one degree increments. at the same time, or by pressing the Press the TIMER button to see the delay time you set displayed on the LED display panel. To change the set delay time, press the TIMER button and adjust the time when the number begins to blink. To cancel the Timer function, press the TIMER button and adjust the number to 0 when the number begins blinking.
The AUTO SWING on Press this button to switch the displayed temperature from ºF to ºC or vice versa.
For best performance, allow at least 20 in (50.8 cm) of air space behind the unit for good air circulation.
18" to 50" (46 to 127 cm) 18"(46cm) 19"- 26" (48cm - 66cm) 27"- 34" (69cm – 86cm) 35"- 50" (89cm – 127cm) B A C D 9" 18" 17" 17" (46cm) (23cm) (43cm) (43cm) 18" to 50" (46 to 127 cm) A B C D Please check your window length and choose the panels that will fit from the above table. If the length of your window requires more than two panels, use one type A screw to fasten the panels once they are adjusted to the proper length. Fig.
" and 50" (46cm and 127 cm) Cut the adhesive foam seal A and C strips to the proper lengths, and attach them to the window sash and frame as shown. Cut the non-adhesive foam seal B strip to match the width of the window. Insert the seal between the glass and the window frame to prevent air and insects from getting into the room. If desired, install the security bracket with a type B screw as shown.
Insert the diffuser into the vent panel then slide the diffuser left to lock it. First insert diffuser into the vent panel fully and then slide it to lock. Use the type C screw to fix the diffuser more firmly in place, if desired.
Cut the adhesive foam seal A and C strips to the proper lengths and attach them to the window sash and frame as shown. Cut the non-adhesive foam seal B strip to match the window height. Insert the foam seal between the glass and the window frame to prevent air and insects from getting into the room.
Insert the diffuser into the vent panel and slide the diffuser down to lock. First insert diffuser into the vent panel fully and then slide it to lock. Use the type C screw to fix the diffuser more firmly in place, if desired.
Failure to follow the above precautions could result in electric shock or personal injury.
USE OF A DRAIN HOSE WHEN USING THE DRY MODE If you wish to use the DRY mode because the unit is running in high humidity or for other reasons, remove the drain cap and rubber plug from the back of the unit. Purchase and install a drain hose (1/2" inside diameter) on the back of the unit and place the open end of the hose in a suitable drain location or outdoors. FL APPEARS IN THE DISPLAY The water collection tank is full. Drain the tank and restart the air conditioner.
If the air conditioner will not be used for an extended period of time:
If a power failure occurs, turn the mode control to Off. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload. This is normal. The air conditioner automatically shuts off when the room temperature equals or is less than the set temperature. Adjust the temperature setting, if needed.
www.lg.
