Manualshelf

Engineering Data Guide

ManualsBrandsLG ManualsAir Conditioners11,800 BTU Packaged Terminal Air Conditioner (3.7 kW)
61626364656667686970
Installation 69
Installation of unit6RWU0-02A
PTAC
Unit installation
1. Remove the shipping screw from the ventilation door.
(refer to figure on the right)
2. Remove the front gille by pulling it out at the bottom to
release it, then lift it up along the unit top front.
(refer to figure on the right)
3. Slide the unit into the wall sleeve and secure with 6 screws
through the unit flange holes. (refer to figure on the right)
4. Reinstall the front grille by hooking the top over the unit top,
then pushing it in at the bottom. (refer to figure on the right)