Engineering Data Guide

Accessories 87
Mechanical accessories6RWU0-02A
PTAC
2.3 Architecture Grille Aluminum – Single Pack.
Outdoor Grilles are attached to the Wall Sleeve and exposed to the exterior Wall. These Grilles comes in industry standard
size of 42" x 16". These Grilles are of two types :
(a) Stamped Aluminum Grille
Installation Procedure:
The Installation and servicing of the equipment should be performed by qualified and experienced personnel only.
(a) Stamped Aluminum Grille.
1) Prepare the wall sleeve for installation of the Grille by removing the cardboard stiffener and rear enclosure panel from the
sleeve. These items may be removed from the inside of the room.
Note: -
The Sleeve stiffener must be taken out before the rear sleeve enclosure panel can be removed from the sleeve.
Aluminum
AYAGALA01A
Dark Bronze
AYAGALB01A
Soft Dove
AYAGALC01A
Stamped Aluminum Grille
AYRGALA01
and (b) Architecture Grille.