Owner's Manual

Control Locations
Owner’s Manual 15
ENGLISH
Self-Diagnosis
FUNCTION:
If the unit has a malfunction, a green OPERATIONLED located on the Display PCB used by the unit to
indicate the errors.
USE:
If the customer has to register a complaint to the service center, he can be very clear about registering
the complaint that what is happening & by referring the user's manual the customer can clearly define
the problem.
So that the engineer should go fully prepared with the prescribled tools to be used regarding that
problem. It also keeps the customer aware about the unit.
Here are some of the problems defined below for which the LED indicates by flashing number of times
the error has been reconrded against it.
The errors are the mentioned in the (Table 13) which is as follows:
ON Normal
OFF No power / failed board
Fault Codes
CH 01 Indoor Air Thermistor Error
CH 02 Indoor Coil Thermistor Error
CH 03 Outdoor Air Thermistor Error (PIHP Only)
CH 04 Outdoor Coil Thermistor Error (PIHP Only)
CH 05 Mode Error
CH 06 Setpoint Error
CH 07 Bad Thermistor Wiring