User's Guide Model : LP 60
User's guide .................................................................................................. Important Safety Instructions Selecting a place to work Using the battery pack ...................................................................... ................................................................................. ....................................................................................
Using the battery pack .................................................................................. 29 Using the AC adapter 1. Connecting the AC adapter to an AC outlet (100~240V) 2. Connecting the AC adapter to the notebook PC. 3. Opening and positioning the LCD display. 33 Power On 35 .................................................................................... ................................. ............................................ ............................................
Attaching external devices Attaching a USB device Attaching a television using an S-Video port Attaching an external monitor Attaching an IEEE 1394 device ............................................................................. ................................................................................. ..................................................... ........................................................................ .................................................................
Setting Load Optimal Defaults ........................................................................ Restoring the system by using Recovery Driver re-installation CD ..................................................... ..................................................................................... 85 86 87 Storage/Memory......................................................................................... 88 Using the optical disk drive Inserting a CD Removing a CD 88 ................
Storage devices...........................................................................................100 External I/O Interfaces .................................................................................101 Display ......................................................................................................101 Sound........................................................................................................101 LAN ...........................................................
User's guide Thank you for using the LG products. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual The following signs call the user. to the carefully before using the computer. attention to features and Follow the instruction closely to operations that may be dangerous to reduce the risk of physical harm or damage equipment. Danger: Not following the instruction will result serious injury. Warning: injury.
Reproducing any of the information contained in this publication without written permission is prohibited. Your computer complies with the radio frequency and safety standards for all of the countries and regions in which it has been approved for wireless use.
Important Safety Instructions These instructions will enjoyment from the product. Set up your computer on a flat, stable surface. (LG is not responsible for the problems and damages caused by incorrect use of the computer in an unsafe environment.
space around the computer for ventilation. The computer may overheat and result in fire or injuries. Do block the fan louvers and not Using the leave enough battery pack Warning only the battery paack that is recommended by LG. Using a battery pack of a different type may result in explosion. Use Keep metallic objects, such keys and clips, away from the battery pack. Objects that conduct electricity can short-circuit the battery pack and result and/or injuries.
Lock the Notebook locker at the bottom surface. There is the risk of Replacing the damage to the battery. backup (standby) battery Warning If the back up The lithium handled, or battery is not properly replaced, there batterry contains lithium and disposed of. Replace only with a can is the risk of explode battery of the type recommended by -10- explosion. if it is not LG.
to Connecting AC power an source Warning Do not use loosend or damaged power There is the risk of electric shock or plugs. fire. properly grounded outlet. Connecting the computer to an outlet without shock and damages to your computer. Use Do not touch or grab the power plug proper grounding may result in electric with wet hands. There is the risk of electric shock. Hold the There is plug body when removing the power cord from the risk of fire and damages to the computer.
If you find liquid absorbed into your computer, remove power cord, battery, and any other cables from your computer, and contact a Technical Service for help. There is the risk of electric Before shock, fire, cleaning the computer, remove from your computer. There is the risk of electric shock the Using or damage or power damage to the computer. cord, battery, and to the any other cables computer.
If you drop your computer, remove the power cord and battery pack, and then Technical support for help. There is the risk of electric shock or fire. contact a Do not use or place your computer near heat, sparks, or other sources of ignition. There is the risk of fire. If you smell smoke from the computer or adaptor, turn off the computer, power cord, and then contact a Technical support for help. There is the risk of fire.
Follow the instructions in the User's There is the risk of Do not damage place objects to the guide. computer. into the PC Card slot. There is the risk of electric shock Upon completion of any service or or fire. repairs, ask service technician to perform safety checks. Ignoring safety checks may result in electric shock Use the Wireless LAN at least 5m away from When using the Wireless LAN near a plasma The connection may be unavailable or using external device, make fire.
Upgrading the computer Warning Before disassembling the computer for upgraing There is the risk of electric shock contact Technical Support for a or purposes, turn off the power and fire. If you need to disassemble your computer, help. and other small parts out of reach of children. Children may choke on a screw or other small part. If a child swallows get medical help.
and Carrying storing the computer Caution Before moving the computer, You may fall When over turn the power off and remove all the cables. the loosend cables. airplane, follow the instructions by a flight attendant. Using the computer on an airplane may result in an accident. traveling on an Do not carry your computer, Do not use Prolonged leaving your computer in direct exposure to high LCD screen open.
Preventing data loss (handling hard disk drives) Caution Be cautious when handling the hard disk drive. The hard disk drive is very delicate to any physical impact. Always make backup files for your data. LG is not responsible for the data lose caused by users. The data damaged in the following situations: 1. Exposure to a physical shock during the disassembling or installing process. 2. The computer is reset (rebooted), for example by power outage, while the hard disk drive is operating.
A correct pose of your body and using head set Warning Adjust an angle for LCD to avoid reflections from enviromental screen The top portion of the LCD screen Keep your head and neck in should be your chair to Sitting on a to your chair in keep a arms your wrong below your eye level. upright position. an Keep your forearms, wrists, and hands in Adjust on or a horizontal position. and hands in position for a a comfortable position.
For Australian Users Warning For safety reasons, only equipment with a telecommunications compliance equipment previously labelled or certified. connect label.
Laser An compliance statement optical disk drive (device), such DVD±RW drive which classification label is can on as a DVD-ROM, be installed in this unit is the surface of the drive as a DVD/CD-RW COMBO, laser product. The driver's shown below.
Overview Package The contents following items are with the items in your included in this package. package. Match the items below Some items may look different from the pictures.
Note: Battery is consumable, so its capacity and lifetime will gradually decrease. Caution When cleaning your computer, use cleaning products manufactured specifically for computing equipment. Using abrasive chemicals, such as paint thinner, benzene, or alcohol, may damage your computer.
Components of Notebook PC Learning the components and their functions helps more efficiently. you use the computer Front view Windows Media Player button Wireless LAN Wireless (option) LAN Volume up button (option) LCD Volume down Internet button activation button Outlook Express button Search button Power button Keyboard TouchPad TouchPad button Built-in Built-in Speakers Speakers Note: Pressing the Volume up and down buttons at the -23- same time mutes the sound.
Opening and Closing LCD display of notebook PC Push the latch button in the direction of the the direction of the arrow arrow 1, and open the display panel as 2. Adjust an angle of the display for comfortable viewing. After using notebook PC, gently close display until you hear a click.
Rear view Note: Images below may look different from the actual products. Fan louvers Microphone jack Security keyhole Modem port Power jack LAN S-Video connector port Headphone jack USB device port VGA port Security keyhole: User can attach a separately purchased chain lock security keyhole which is to prevent a note book theft.
Left view 4-in-1 PC card CF Card slot(SD/MMC/ Memory stick/Memory stick pro) eject button CF Card slot Fan louvers IEEE 1394 PC Card port eject button USB port PC Card slot Right view DVD-ROM Drive / COMBO Drive / (DVD/CD-RW) Emergency eject hole DVD±RW Drive Emergency eject hole: Insert a thin can open the disc tray manually.
Note:Your computer has built-in DVD-ROM, DVD/CD-RW COMBO, DVD±RW Drive depending on your model. Speed of DVD-ROM, DVD/CD-RW COMBO, DVD±RW Drive depends on model. a Status indicators 1234 5 6 7 1.AC Power indicater 2.
3.Caps Lock: Caps lock indicator is on when the Caps lock key is pressed. When this indicator is on, you can type capital letters without pressing the Shift key. 4.Num lock: Num lock indicator is when the combination of the Fn and Num lock on pressed. When this indicator indicator 5.Drive in Drive in disk or is on, you can use internal not be used when disabled from BIOS set up. can keypad. Num use indicator is on optical disk drive.
Basics This section describes how to adapter section the basic features of your notebook PC. An AC is needed to supply power to your notebook PC. Read this use battery pack before using the notebook or PC because it describes how to step by step. Using the battery pack The battery pack must be fully charged before first (Refer to Page 34 "Using the AC adapter") time use. Caution You must turn off the power before replacing the battery pack.
2. Place the battery pack in the battery slot, and align the two protrusions battery pack with the two slits on the side of the battery slot. 3. Gently push the battery pack into the slot until it clicks. battery pack is inserted. Please lock the battery pack in place by sliding the latch If you hear on the a on the click, the battery pack in the direction shown below. If you don't lock the out from the slot. 4.
(Refer 5. 6. to Page 34 "Using the AC adapter") Check the battery status indicator. If the battery is fully charged, the indicator is turned off. To remove the battery pack, (1) Unlock the left battery latch to the right until it clicks (2) Slide the right battery latch to the right and hold; then take the battery pack out of the slot. Caution When you using the computer for a long time, the battery pack can be selfdischarged and damage to the notebook PC.
Note: The battery pack has the following characteristics. Self-discharge: The battery gradually loses its power over time without ever being used. Periodic full discharge/charge: Frequent recharging of the battery pack can reduce the duration of the Periodic battery pack. performance of full 60 days. discharge/charge will restore the capacity of the battery pack, in every 30 You should use the battery until its power is low; then fully charge the battery.
Using the AC adapter An AC adapter or battery pack adapter can be used with a is needed to supply power to your notebook PC. The 100~240VAC power source. Use only the AC adapter that comes with your computer. Using any other adapter may cause damage to your notebook PC. Using any other adaptor may cause damage to your notebook PC. AC Note: When 1. battery Connecting status indicator is on, the the AC adapter Connect the power cord to the 2.
Warning Do not overload Overloading an an electrical outlet with connections to electrical outlet may result in fire Do not touch the power cord or plug or multiple devices. electric shock. with wet hands. There is the risk of electric shock. 3. Opening Slide the and positioning battery latch button the LCD display. in the direction of the panel in the direction of the arrow 2. Adjust an angle of the display panel for comfortable 1 2 2 -34- arrow1, and open the display use.
Power On Press the power button to turn on the computer. Note: The power switch electricity and volume purposes. Do not up/down buttons are coated for preventing static put a liquid stuff on the notebook PC. It may result in electric shock. Registration Window Before turning on the computer, make battery is charged. Turning 1. on the sure the AC adaptor is connected and the computer Slide the latch button and open the -35- display panel.
2. Press the power switch. 3. Pressing the power switch starts the Windows(R) XP 4. startup If you turn the power screen on 5. In a displayed. the computer for the first time, you have to your copy of Windows XP. The the is registration model, but the difference does moment, appears on a the self-diagnostic procedures; then process may differ not affect the dialogue box, saying "Welcome screen. Then Click [Next]. -36- use register depending of your computer.
6. "End User License to read the 7. 8. and "Ready "No, to message appears agreement, select "Yes, "What's your name Agreement" computer's name?" description for register I on message appears on Make sure [Next]. the screen. Type the [Next]. with Microsoft?" message appears -37- screen. accept," and click [Next]. your computer, and click not at this time" and click the on the screen.
9. "Who will names 10. of the "Thank this use users you!" registration computer?" and click message appears on the screen. Type the [Next]. message appears the on process. -38- screen.
Turning off the computer Quit all running applications; click [Start] and choose [Turn off computer] from the start up menu. LG In the Turn off computer window, choose Turn off.
The computer is turned off automatically. Close the LCD dispay until it clicks. Caution If the Drive in damage indicator is on, do not turn off the computer, the data being read from or written to the drive. use as doing so may Warning If Windows does not shut down properly, press and hold the power switch for more seconds; the system will shut down. Turning off the computer this way may damage the system.
Using Windows XP Windows XP is new, brilliant and easy-to-use. Background and title bar have been rearranged concisely, and it became easier to access the application programs from the start menu. Also, it allows users with more diverse options to choose from when decorating desktop's appearance. Overview Windows XP is an operating system that features in Windows is recommended to utilize > [Tour Windows XP] to computer. Learning the basics computer effectively.
Help and Support Click [Help and Support] to learn how to solve problems you may encounter while using the computer. Click [Start] -> [Help and Support]. LG The following window appears. You can search for useful Help and Support information. You can connect to the Internet and ask for assistance online.
Windows XP desktop 5 2 LG 1 1.[Start] button Click [Start] button 4 3 to open the [Start] menu. Click [All Programs] to open the list of programs installed in the computer. 2.[Start] menu [Start menu] shows everything you need to start working in the Windows XP environment. 3.Taskbar Taskbar shows programs that 4.Taskbar icons and clock are currently Taskbar icons show and let you open and running.
Start menu LG Pinned items My computer shows the drive and network information for your Control Panel lets computer the change settings in your you computer Recently used Changing the look of the Start items menu Right click [Start] button and select [Properties]. In the Start menu tab, choose from either Start menu Click [OK] to apply the new setting. Changing the pinned items in the Start Right-click the item you want to pin Select [Pin To Start Menu].
Control Panel The Windows XP Control Panel can display items in either View.
up Local Area Network Setting Local Area your home Network or connections provides high-speed network connection for When using Wireless LAN, refer to "Using Wireless LAN" (LAN) company. (LAN) connection (page 60). Attach a LAN cable to the Ethernet Click [Start] -> [Control Panel] [Network Connections]. Right-click a -> (LAN) connector. [Switch to Classic View] Local Area Connection and select -46- -> [Properties].
If the following window appears, click [General] tab and 1. Check if Broadcom 440x Integrated Fast Ethernet Controller is installed in the computer 2. Then, check Internet Protocol, and 3. Click on [Properties] 1 2 3 Click on [General] tab, and Select [Obtain Click [Ok] when Internet an IP address protocol (TCP/IP) setting is automatically] completed. Note: Ask your network administrator for the appropriate IP settings.
Changing the Themes and Desktop background Using the Windows Classic Theme Click [Start]->[Control Panel]->[Switch to Classic View]->[Display]. Click [Themes] tab Select [Windows Classic] from the [Theme] drop down menu. Using a different theme 1. Click 2. [Start] -> [Control Panel] Click [Themes] tab 3. Select another theme from the -> [Switch to Classic [Theme] drop down View] -> [Display]. menu.
Changing the desktop background Click [Start]->[Control Panel]->[Switch to Classic View]->[Display]. Click [Desktop] tab. (OR you can right click on the mouse while in desktop background. When a short cut menu pops up, choose [Properties] Scroll down the background. You [Background] drop down menu and select an image for the can also click [Browse] button and select an image you have saved. Setting the Screen Saver Click [Start]->[Control Panel]->[Switch Click [Screen Saver] tab.
Select the idle time before menu. activating the Screen Check [On resume, password protect] unauthorized Saver from to [Wait] drop down protect the computer from users. Taskbar programs and files that are currently open. If there are many programs running on the computer, the Taskbar group together files from the same program to prevent taskbar icons from cluttering up the Taskbar. Taskbar displays Desktop cleanup Desktop Cleanup Wizard Desktop Cleanup Wizard 1. 2. 3.
Using the Power Windows XP uses Click -> its own power-saving [Control Panel] Double-click [Power Options]. In [Start] Options Power computing Power Click -> program to manage the [Switch to Classic battery power. View]. Options Properties window, change the settings best suited for your environment. Options Properties [Power Schemes] tab. Drop down the menu and select [Portable/Laptop] to set notebook PC with the appropriate power schemes.
Note: If the computer enters the battery power. System standby mode, the hard disk is turned off to conserve System standby mode, you cannot save your work. Be sure to save your work before entering System standby mode. When the computer enters System hibernation, the computer saves all your work in In the hard disk and turns off the computer. Caution If the computer enters System standby or hibernation mode while playing a computer game, a serious error may occur.
Power Options Properties Click [Alarms] tab. Check [Low battery alarm] and [Critical battery alarm], and move the sliders to set the power level to activate low battery alarm and critical battery alarm. be notified with Sound alarm message. You can also set the alarm action which automatically puts the computer into System standby mode or System hibernation mode. You can also enable the computer automatically run a specific You can or Display program when the alarm goes off.
Advanced tab computer to prompt for password when computer resumes from standby. You can also set the computer to enter a power-saving mode when closing the display panel. By pressing the combination of Fn+F4, your computer enters a power saving mode, leaving the display panel open. In Options, you can set the Power Meter Click the Power Meter icon on the Taskbar to check the power level of your computer.
System Hibernation In Hibernate disable System hibernation mode and check the disk space needed for hibernation. tab, you can enable or Caution Do not remove the battery pack when the AC adapter is not connected to the computer. If you keep using the computer while low on the battery power, you may lose the data when the battery power goes out. If you are notified of low battery power, save your data and connect the AC adapter, or turn off the computer and change the battery pack.
external devices Attaching Attaching USB You mouse 1. USB device (not included) keyboard, hub, digital can use Attaching a a television using to -> a port TV to the S-Video connector Connecting system (Works only Click and other devices that support USB. S-Video Attach the S-Video cable from Connecting 2. an camera with TV that has S-Video [Start]->[Control Panel] ->[Switch [Settings] tab -> [Advanced].
[Display]tab, select 3. In 4.
Note: You cannot switch the main a movie Attaching an or game on a display while playing TV and LCD at the same a game. You cannot time. external monitor Note: Turn off the computer before attaching an external monitor. External monitor (not included) by short-cut keys) After install the external monitor to the notebook PC, use Fn + F7 to switch the main monitor to LCD only, monitor only, and LCD + monitor both, Monitor toggle function (switch the monitor in sequence.
Attaching an IEEE 1394 device Digital Camera (Not included) You can connect external hard disk drive, external CD-RW, digital camera, video camcorder and other devices that support IEEE1394. Using You Wireless LAN can use Wireless LAN to connect to the network and your home and office. You without the can share files and folders attaching network cables to the use over the Internet in the network computer. It is built-in device in your computer.
Connecting and using the wireless network Right-click the Wireless network wireless network]. icon on the Taskbar and select [View available Select AP (Access Point) you want to connect to and type necessary information. Click [Connect]. If you are having difficulty connecting to a network, click [Advanced]. If you place the mouse pointer on the Wireless network icon see the status of the wireless network.
IP Using Operator everywhere when you use notebook PC. User can access to network at many places (Home, Office, and Vendor etc.) by saving and modifying the network environment (IP address, Domain, Workgroup). For more detailed information, refer to [IP Operator]. IP Operator is useful Double click to access [IP Operator] to network icon on the Taskbar. If the following window appears, select LAN or High-Speed drop down menu and give a name to your computer.
- IP address, Subnet mask, Default Gateway windows are automatically changed grey. When setting [Use the following IP address] option Insert IP address, Subnet mask, Default Gateway window. Then, insert DNS Server. Click the [Profile Save] button when finishing inserting items in [Profile List] Note: When setting [Obtaining an IP address automatically] option, it is unavailable to insert IP address, Subnet masks, and Default gateway.
Miser Using Battery application program to manage energy saving function that makes the maximum battery life of your notebook computer. When using Battery Miser, it is available to use both original power management functions of Windows and the advanced power management functions of battery miser. For more detailed information, refer to [About Battery Miser] in the following screen image. Battery Miser is Double click an icon on Desktop System tray. appears as below.
Battery alarm: User can define the option how the battery alarm works. Note: When pressing the keys Fn + F9, monitor is always on When pressing one more, it return to the original set point.
Input/Output Using The the keyboard About the The keyboard is used for entering text and commands in the computer. keyboard keyboard is composed of character, number, and other special function keys. keys: Function keys enable you to perform different operations depending the operating system and application program you use.
Cursor control Editing keys: keys: You up and down the Character and You the cursor in the direction of the cursor to the beginning can move can move the or arrows. end of the current line, or screen. number keys: consist of character keys, number keys, special character keys, and spacebar. Spacebar is used for creating a space between characters.
Embedded numeric keys: You can enable the embedded numeric to use embedded keypad. Num Lock indicator lights keys to up and enables keypad shown below. You can press the combination of Fn and ScrLk keys again to disable the embedded numeric keys. (To use the numeric keys, you must set the Advanced -> Internal Keypad setting to Enabled in the BIOS Setup Utility.
Modifier and special function keys 4 3 5 2 1 6 7 Shift key: Hold Shift key down and press another key to enter the upper case letter for the key. Caps Lock key: Press Caps Lock key to lock the keyboard in the upper case position. When the Caps Lock indicator lights up, you can press another key in combination with Shift to enter the lower case letter for the key. Esc key: Use Esc key to quit programs or cancel an operation in the program.
7. Windows(R) key: Press Windows key to view the Start menu. LG Note: upper/lower case position by pressing Caps Lock key. Caps Lock indicator is lighted up in upper case position. You can use the combination of Shift and a character key to enter its upper/lower case letter. You Hot can lock the keyboard in the keys following Hot keys provide you with shortcuts to operations, such adjusting the brightness of the computer display.
Fn+F4: Force the computer to enter and power-saving mode. (ex: system standby hibernation) Fn+F5: Press the combination pad, and press again to auto-disable the touch pad. If USB mouse isn't used, touch pad will be enabled again. And after next press Touch pad will be enabled.
Using the touch pad 1 2 The touch pad can 3 be used with button, which functions similar to a at the scroll wheel same 2. 3. Right button: functions similar pad: To time. It has scroll a on a mouse. the pointer. Left button: To select or click items. 1. Touch a mouse move to the right button on a mouse. Caution Guidelines using the touch pad Do not touch the touch pad with a sharp the touch pad.
the Moving Making on the screen finger on the touch pad and slide the pointer to move. Gently place you want pointer your the selection To click for it in the direction in which (Click) making the selection, tap the touch pad once to select position the cursor in a document.
Double-click (Run) double-click, quickly press the left button twice and then release it. You tap the touch pad twice to get the same result. To launch an application, select and double-click the .exe file or the application's icon. To Drag and drop object, select and move the object by clicking and holding the left button and sliding the finger across the touch pad without releasing the To drag an button. drop the object you have just dragged, release the left button.
. Drag: Move the icon without releasing the left button Drop: Release the left button above the recycle bin. ClickLock: enables you to select text mouse button or touch pad button. or drag a file without holding down the Follow the instruction below to enable ClickLock. If ClickLock is enabled, simply hold down the mouse button or touch pad button for a moment and then release it, you still get the same effect as continuously holding down the button.
Click Settings and adjust how long you need to hold down button to enable ClickLock, and then Select OK.
Using the scroll up/down function up/down button. In a program window with a scroll bar, you can move up and down the windows using the scroll up/down button. When you scroll a window using the scroll up/down button, the pointer on the screen Your computer has does not a built-in scroll move. up/down function by using Touch pad. In a program window with a scroll bar, you can move up and down the windows by using Touch pad.
System Setup The system setup saves your computer's hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. Starting the system setup password. (Page 79) Boot Password Required (Page 83) Changing or removing the password. (Page 84) Setting Load Optimal Defaults. (Page 86) Setting a Caution change the system setup arbitrarily.
Note: Cursor control keys (arrow keys) the computer. 2. When LG logo appears 1. Turn move the Setting a on down, to the left and right. Setup Utility the screen, press F2. window appears. password If you want to protect the system setup from the instructions below to set a password. can up, on 3. The BIOS You cursor set a password in the BIOS an unauthorized user, follow Setup Utility program.
Change Supervisor Password your computer from unauthorized users. The default setup does not have a password. A supervisor password A password protects prevents unauthorized users from factory changing the system setup. Start the BIOS Use arrow Setup Utility. keys to select Set Supervisor Password under Security menu, and then press Enter. Note: change supervisor password to gain access and change items in the BIOS Setup Utility, and select Power on Boot.
If the following message appears, enter the If the following message appears, press Enter. If the following message appears, select OK to Change User set a new password again save to confirm. and exit setup. User Password password is a secondary compared to supervisor password in order to set a supervisor password. user password. a 1. Start the BIOS Setup Utility and 2. Use to select Set User Password and press Enter.
Note: A user BIOS password gives limited access for changing the settings Setup Utility compared to a supervisor password. If the following message appears, enter a password must be consisted of character maximum length of 8. password and then press Enter. A A~Zand numbers 0~9, and have the new If the following message appears, enter If the following message appears, press Enter. a new -81- in the password to confirm.
If the message appears, select OK to exit setup and restart. following Boot Password Required password which protects the system by selecting Change Password and Change Supervisor Password. User can set up Start the BIOS The a boot Setup Utility, Use following screen appears, Supervisor Password) arrow set up keys to move Security.
After Select Boot Password Changing or Start the BIOS Required, removing Setup Utility, the choose Yes using "-" key and press Enter. password enter your password, and then press Enter. change the password, follow the instruction on Setting a password. To remove the password, follow the instructions below. Use arrow keys to select Security menu, and select a password you want To to remove, and then press Enter.
If the following message appears, input a new password and If the following message appears, enter a new password If the following message appears, press Enter. -84- press Enter. to confirm. .
Press F10 to If the following Setting If to save the new settings. message appears, select OK to exit setup and restart. Load Optimal Defaults accidentally modifies the system setup, follow the recover Load Optimal Defaults. a user instruction below Start the BIOS Use arrow Setup Utility, and use arrow keys to select Exit. keys to select Load Optimal Defaults, and press Enter. Select Yes and press Enter to Press F10 to If the save following the new recover Load Optimal Defaults.
Restoring You can the system by using Recovery CD restore your computer system by using Recovery CD, shipped with your Notebook PC You can select two options (Full Recovery without Format / Full Recovery after Format) 1) Please make backup files from your Notebook PC. 2) Insert the Recovery CD into the CD-ROM drive, and then turn off your computer. 3) Turn on your Notebook PC, and then press Enter when "Press any key to boot from CD" message appears on the screen.
Driver re-installation the computer and go to [Start]-[All 2. Select the device driver you want to install. 1. Turn on 3. Follow the instructions to require Programs]-[LG GILJABI]. complete the installation. Some device drivers you to restart the computer after the installation.
Storage/Memory Using the optical disk drive Different model types provide different optical disk drives. (Some models have DVD-ROM drives and others have DVD/CD-RW COMBO/DVD±ROM COMBO drives) Inserting Turn on a CD the computer, and press the eject button Place the CD in the middle of the tray. (Label -88- on on the CD-ROM drive.
Push the tray into the CD-ROM drive. Note: When you place the DVD-ROM OR DVD/CD-RW COMBO, DVD±RW drive use your computer on flat surface. The drive may not function correctly on an uneven surface. Your computer has a CD-ROM drive with the speed of 24X or faster; a therefore, the drive may rattle when you first insert Be careful not to scratch the surface of Do not clean such as CD-ROM a Benzene or or a CD-ROM a or CD. CD-RW/DVD-ROM disk.
Playing Using You an audio CD Windows Media can use Player Windows(R) Media Player to play various types of audio and video files. play and make a copy of an audio CD, listen to the Internet radio broadcast, play movie clips, and listen to music or watch a video on a web site. If you have a DVD drive, you can play a DVD. If you have a CDRW drive, you can use Windows Media Player to make your own music CD. You can Starting Windows Media Player the computer.
Using 1. Power DVD Insert DVD title in the DVD-COMBO When the 2. following window As you insert the DVD opens, title, the drive, and close the tray. select Play DVD Play and click [Ok] DVD Auto-Resume window will open it will shown preference and click [Ok]. If you check "Don't ask me this question not open next time automatically and play as you preferred. below.
Power DVD will 3. in the Help now menu play. You can read the detailed instruction of the Power DVD from the main control. Note: If unchecked this question again," you will receive the message every time you open the Power DVD. If you delete the DVD title and play it again, you will also receive the preference window. You not on "Don't ask change the region possible to change. Be can me counter damage the system or remove 5th change, it is change the regional code. 5 times.
Using SD Memory Your computer Note: Photo Inserting Turn on can read from and write to SD Memory Card. images SD Card may look different from the actual Memory Card the computer, and place SD Memory Card in SD Memory Card slot. Push SD Memory Card into the slot until it clicks. Removing 1. 2. the SD product. Memory Card Memory Card with the tip of your finger. SD Memory Card ejects.
Using Memory Stick Your computer read from and write to Memory Stick. Note: Photo can images Inserting Memory Turn on (SONY) may look different from the actual Stick the computer, and place Memory Stick into slot. Push Memory Stick into the slot until it clicks. Removing 1. 2. the SD product. Memory Card Memory Stick with the tip of your finger. Memory Stick ejects.
Using PC Card Your computer Note: Photo Inserting Turn on can read from and write to PC Card. images may look different from the actual product. PC Card the computer, and place PC Card in PC Card slot. Push PC Card into the slot until it clicks. Removing PC Card 1. Press PC Card with the 2. PC Card tip of your finger. ejects.
Expanding When you memory memory using the computer, capacity. are you may want to expand the About memory Your computer uses DDR (Double Data Rate) SDRAM SO-DIMM (Dual InLine Memory Module) with 200 pins. Each memory socket can support a memory module from 64MB to 1024MB, and the maximum memory capacity of the computer is 2GB. Before When installing memory installing or them to the static Make removing the memory modules, be careful electricity as it can damage the modules.
Caution PC2700/DDR SDRAM SO-DIMM 333MHz/266MHz/200MHz with FSB Frequency of 400MHz. Your computer supports Warning Before disassembling the computer for upgraing purposes, remove the power cord, phone line, and battery pack. There is the risk of electric shock contact the customer service for or turn off the power and fire. If you need to open the computer cover, help.
Note: Before removing the cover, shut down your computer, remove AC adapter and battery pack, and detach any device or cable that are attached to the computer. Use the notch on the memory to make sure the memory aligns with the socket, and then inserts the memory into the socket. Note: Push down the memory until the latch firmly Push down the memory until you hear a secures click. -98- the memory on the socket.
Caution Use only the memory module sold by LG. Using other memory modules can damage your computer. Close the tighten the screw. After the installation, reboot the computer. If you see an error message regarding memory capacity, click F2 to enter the BIOS Setup Utility and save the settings. cover and Note: When rebooting the computer, make sure the size of installed correct. If different, re-install the memory module.
Features Model LP60 Processor - Intel Mobile Pentium 4 Processor with 1-MB L2 Cache (L2 cache : 1024KB, Micro-FCPGA 478 (Mobile Prescott Processor) package: 2.80GHz, 3.06GHz, 3.20GHz) Note: The CPU cannot be equipped with a replaced upgraded by the user. The computer depending on the model type.
Note: The specification for the optical drive depends External I/O Interfaces VGA port 4 --in-1 PC Card slot PCMCIA card slot Compat Flash card slot 3 instant keys (www, email, search) Microphone jack Speaker/Headphone jack 4 Universal Serial Bus (USB) devices RJ11 Modem port RJ45 Ethernet port IEEE 1394 port S-Video port Display ATI Mobility Radeon 9600 Graphics Controller 4XAGP Video Memory: 64MB 15.4" WXGA(Resolution: 1280 X 800) TFT Color LCD Sound CONEXANT AC'97 2.
Power AC specification Adapter (Free Voltage) Input: AC 100 Output: DC 19V, 50 60Hz 240V, 2.0A, 6.3A, 120W the correct adapter for your computer. ~ Note: Use ~ Battery pack (Li-Ion) DC 14.8V, 4400mAh (8-cell) Charging time Less than 3 hours with the power off in room temperature (10~40°C/50~104°F) Less than 4 hours with the power off in low temperature (0 10 °C/ 32 ~ ~50°F) Battery Life More than 2 hours (Battery Mark(TM) V4.0.
Operating environment Operating 10 35 °C ~ (50 95 ~ °F), 20 80% relative ~ humidity Non-operating -10 60 °C ~ (14 140 ~ °F), 10 80% relative ~ -103- humidity
