Owner's Manual

Recording
10
Basic Recording
11
Select a function you wish to record by setting
FUNCTION SWITCH except TAPE function.
22
Insert a blank tape.
33
Press RECORD ( ) button.
TAPE PLAY ( ) button is pressed
automatically.
44
Start playing your CD or RADIO.
CD Synchronized Recording
This feature automatically records an entire CD into a
cassette.
11
Load a CD disc and Set FUNCTION SWITCH to
CD.
22
Insert a blank tape.
33
Press RECORD ( ) button.
TAPE PLAY ( ) button is pressed
automatically.
44
The synchronized recording is started
automatically after about 7 seconds.
To pause recording
Press TAPE PAUSE ( ) button. Press TAPE PAUSE
()button again to resume recording.
To stop recording
Press TAPE STOP/EJECT ( ) button.
(Your cassette deck will automatically stop at the end of
the tape.)
Notes
• If you wish to record from the desired track, select the
desired track with CD SKIP/SEARCH ( ,
) button before commencing CD recording.
• If bear noises sound when AM broadcast recording,
reset RIF on the rear panel.
Wind the tape to the point recording starts. (Use only normal tapes.)
FUNCTION SWITCH
CD BACKWARD SKIP/SEARCH
()
RECORD ( )
TAPE PAUSE ( )
TAPE STOP/EJECT ( )
TAPE PLAY ( )
CD FORWARD SKIP/SEARCH
()