Owner's Manual

16
Operation
Auto Function Selection
?
If
you press
CD PLAY
( )
while in radio
mode,
CD
function will be selected.
?
If
you press
PRESET
(
/
)
or TUNER/ BAND
during
CD or CASSETTE
play,
radio function will be
selected.
Setting
the Clock
1.
Press
CLOCK.
(If
the clock is
requires setting, press
and hold
CLOCK for more than 2
seconds.)
2.
Select
a 24 hour
cycle
or 12 hour
cycle by
pressing
TUNING/TIME
(-/+).
3.
Press
SET
to
confirm
the selected
hour
cycle.
4.
Use
TUNING/TIME
(-/+)
to set the correct
hour.
5.
Press
SET.
6.
Use
TUNING/TIME
(-
/
+)
to set the correct
minutes.
7.
Press
SET and
the correct time is shown
on
the
display.
8.
Press the
CLOCK
button at
any
time to
display
the time
for
about
5
seconds.
Using
the
Sleep
Function
When the
sleep
timer is
used,
the
power
is
automatically
turned off after the
specified
time has
elapsed.
1. To
specify
the time
delay
before
the
power
is
turned
off,
press
SLEEP.
In the
display
window shows "SLEEP 90" for about
5 seconds. This means that the
system
turns off
automatically
after 90 minutes.
Each time the button is
pressed
the time interval
before it turns off is reduced
by
10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
2. To check
the
remaining
time until the
power
is
turned
off.
While
the
sleep
function is active
press
SLEEP
briefly.
The
time
remaining
until it turns
off
is
displayed
for
about
5
seconds.
Note:
If
you press
SLEEP while the
sleep
time is
displayed,
the SLEEP time is reset.
To cancel
the
sleep
timer
mode
If
you
wish to turn off the
function,
press
the SLEEP
button
repeatedly
until "SLEEP 10"
appears,
and then
press
SLEEP once
again
while "SLEEP 10" is
displayed.
Using Microphone
(OPTIONAL)
You can
sing
to a music source
by connecting
a
microphone
to unit.
1.
Connect
your microphone (not supplied)
to the
MIC
socket.
2.
Play
a
music
you
want.
3.
Sing along
with the
accompaniment.
For
your
reference
You can record
during using microphone.
Refer to the
"Recording" explanation
section.
(12HR)
(24HR)
or