Owner's Manual

18
Presetting
the Radio Stations
You can
preset
50 stations for FM and
AM(SW:
OPTIONAL).
Before
tuning,
make sure that
you
have
turned down the volume to the minimum.
1.
Press
AM /FM/BAND
(or
TUNER/BAND on
the
remote
control)
to select the
frequency (FM
or
AM(SW:OPTIONAL)) you
want.
Every
time
you press
this
button,
FM and AM
changes alternately.
2.
Select
a
station
you
want
by pressing
TUNING/
TIME
(-
/
+)
buttons.
Tuning
in
manually
-
Press TUNING/TIME
(-
/
+) briefly
and
repeatedly.
Tuning
in
automatically
-
Press TUNING/TIME
(-
/
+)
for more than 1
second.
Scanning stops
when the unit
tunes in a station.
3.
Press
PROGRAM/MEMORY on
the front
panel.
A
preset
number will flash in the
display
window.
4.
Press
PRESET
(-
/
+:unit)
or PRESET
(
/
:remote
control)
to select the
preset
number
you
want.
5.
Press
PROGRAM/MEMORY
again.
The station is stored.
6.
Repeat steps
1
(or 2)
to 5 to store other
stations.
To
delete
all
the
memorized
stations
Press and hold PROGRAM/MEMORY on the front
panel
for about two
seconds,
"CLEAR ALL" flash in the
display
window and then
press STOP()
/ CLEAR
again,
the stations are deleted.
For
your
reference
If all stations have
already
been
entered,
FULL
message
will
appear
in the
display
window for a
moment and then a
preset
number will flash. To
change
the
preset
number,
follow the
steps
4-5.
To recall
presets
Press and hold PRESET
(-
/
+:unit)
or PRESET
(
/
:remote
control)
until the desired
preset
number
appears
or
press
it
repeatedly.
Listening
to the Radio
1.
Press
AM/FM/BAND(or
TUNER/BAND on
the
remote
control)
to select the
frequency
band
(FM
or
AM) you
want.
Every
time
you press
this
button,
FM and AM
changes alternately.
The last received station is tuned in.
2.
Press
PRESET
(-
/
+)
or PRESET
(
/
)onthe
remote
control) repeatedly
to select the
preset
station
you
want.
-
Each time
you press
the
button,
the unit tunes in
one
preset
station at a time.
3.
Adjust
the
volume
by
VOLUME
(-/+)
buttons
repeatedly.
To
listen to
non-preset
radio
stations
?
Use manual or automatic
tuning
in
step
2.
?
For automatic
tuning, press
and hold TUNING/TIME
(-/+)
on the front
panel.
To
turn
off
the
radio
Press
POWER( STANDBY/ON)
to turn the unit off or
select another function mode
(DVD/CD
or
TAPE).
For
your
reference
?
If an FM
program
is
noisy
Press FM/MODE so that "ST
"
disappears
in the
display
window. There will be no stereo
effect,
but
the
reception
will
improve.
Press FM/MODE
again
to restore the stereo effect.
?
When
recording
a
MW(AM)
broadcast,
beat
noises
may
occur. If it
does,
press
RIF once.
-
"kHz" flash in the
display
window.
?
Adjust
the antenna to
get
more clear
reception.
-
AM antenna
This antenna is built within the unit and rotate
the unit for better
reception.
-
FM antenna
Pull the
telescopic
antenna out
adjust
the
angle
and direction for better
reception.