DEILAMI_LPC-LM730/735-Eng(24M) MP3/CD CASSETTE RECORDER OWNER'S MANUAL MODEL: LPC-LM730A/X LPC-LM735A/X Please read this manual carefully before operating your set. Retain it for future reference. Designs and notice for specifications improvement.
CAUTION Use of controls CAUTION of RISK OF ELECTRIC procedures or adjustments other than those performance specified here- or in may result in hazardous radiation exposure. SHOCK DO NOT OPEN Laser CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE BACK) component in this product is capable of emitting radiation exceeding the limit for Class 1. COVER(OR NO USER SERVICEABLE PARTS CAUTION:INVISIBLE LASER RADIATION INSIDE.
Contents 1Introduction......................4 .4 SymbolsUsedinthisManual NotesonTapes....................4 . . . . . . . . . NotesonDiscs....................4 Handlingdiscs..................4 Storingdiscs...................4 Cleaningdiscs..................4 Front/RearPanel...................5 RemoteControl....................6 DisplayWindow.....................6 2Installation.........................7 TheACPowerCordConnection . . . . . . . .7 .
1 Introduction To ensure proper use of this product, please read this owner's manual carefully and retain for future Notes reference. Handling discs on on Discs Do not touch the This manual the operation and maintenance of your CD player. Should the unit require service, contact an authorized service location and information provides to (refer on the disc get on by the playback side of the disc. Hold edges so that fingerprints do not the surface.
Fr ont // Rear Panel P anel Front 12 13 10 11 123 Introducin 9 83 7 456 14 15 19 18 16 1. POWER 2. ? CD SYNC. button ? FUNCTION SELECT buttons 3. 4. (STANDBY/ON) 17 button 13. ? ? (CD/TAPE) ? LEFT/RIGHT SPEAKER ? TAPE MODE button model : LPC-LM735A/X ? COUNTER RESET button ? TIMER button ? CLOCK button ? SET/CD PAUSE 5. XDSS button 6. CD DOOR ? ) buttons ? REMOTE SENSOR 8. DISPLAY WINDOW CD OPEN/CLOSE 10. ? PROG.
Remote Control Contr ol 1. 14 1 13 X 2345 XDSS button 2. POWER button 3. TUNER/BAND button 4. This button is not available. 12 5. PRESET 11 6. CD FUNCTION buttons 10 6 9 ? PLAY/PAUSE ? CD ? CD SKIP/SEARCH ? REPEAT button ( ) button button / ( NUMBER buttons RECORD/ RECORD PAUSE button ? BACKWARD PLAY button FORWARD PLAY ( TAPE STOP button ? FAST FORWARD ? REWIND ( ) ) : ( ) ( ) button button SLEEP button 10. PROGRAM button 11. VOLUME 12.
Installation 2 o wer TheACP The A CPo wer Cord Cor d Connection Connection 1. Batter y Battery Installation Unit Before connecting the AC power cord, check operating voltage of your unit is identical with the voltage of your local power supplied. that the 2. Connect one (supplied) end of the AC power cord to the AC IN socket located at the backside of your unit. 3. Plug the other end into the wall outlet. 1. Press and open the 2.
Sound Sound Adjustment EQUALIZER PATTERN (EQ PATT.) button SURROUND XDSS button Volume (SURR.) button X VOLUME ) button ,Remote control: (Unit: increase the sound level, or ,Remote control: Sound Quality Adjustment You choose between 4 fixed sound can ) to press the VOLUME (Unit: MUTE button ( Adjustment Press VOLUME ) to decrease it. impres- sions. Select a button on desired sound mode by using EQ PATT. the remote control.
3 Operation uto Function Selection Auto A Selection ? ? Using Using If you press CD PLAY/ PAUSE ( listen to the radio, CD playback will When the ) during begin. matically elapsed. If you press PRESET ( ) or TUNER/ BAND during CD or CASSETTE play, radio Press CLOCK. (If the clock is CLOCK for sleep timer is Function used, the power is turned off after the specified auto- time has In the display window you can see "90 SLEEP" for about 5 seconds.
Timer ? This function is automatically turned and off on 5. at the time you want. ? Select your desired radio station, press CD button and load a disc or press TAPE button and insert a TAPE. 6. 7. 1. Press CLOCK to check the current time. 8. by pressing on (-/+). Press SET to confirm the hour to switch Set the minute to switch TUNING/TIME For your reference If you don't set clock, timer function doesn't work. 2. Set the hour to switch TUNING/TIME on on. by pressing (-/+).
Presetting You preset can Before the the Radio Stations Stations Listening 30 stations for FM and AM. 1. Press TUNER/BAND to select the frequency that you have turned down the volume to the minimum. (FM or AM) you want. Every time you press this button, changes alternately. 1. The last received station is tuned in. tuning, make to to the the Radio sure Press TUNER/BAND to select the (FM or AM) you want. Every time you press this button, changes alternately. frequency FM and AM 2.
k Tape Playbac Pla yback Tape Note: Use only Tape Recording Recor ding Tape normal tapes during playback. Wind the Basic 1. ("NO the cassette door DOOR Insert PUSH ( a Basic tape function. TAPE" appears in the Open 3. only display window.) by pushing TAPE 1. Recording PLAY 2. Open ( ): ) [or TAPE ( To set the recording only) Press TAPE MODE REVERSE recording only] STOP( 1.
k CD CD Playbac Playback Basic Program Play You 1. Press CD button to select CD function. 2. Press CD OPEN/CLOSE Load a disc with the and Close the disc 4. Program Play (Audio CD) OPEN/ ( to open the disc CLOSE) 3. can arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks. Playback 1. compartment. printed side facing up compartment. Press CD PLAY/PAUSE ( ) 2. 3.
Maintenance and Service 4 the the Unit Unit Shipping Shipping Cleaning The original shipping carton and packing materiin handy. For maximum protection, re-pack the unit as it was originally packed at the factory if you need to ship it. als can come soft, dry cloth when cleaning the player. If a the surfaces are extremely dirty, use a soft cloth a mild detergent solution. lightly moistened with Never use zine, disc from the center out.
Reference 5 Remote Control Contr ol Operation Operation Range Rang e Point the remote control at the remote Distance: About 23 ft remote (7 m) from the front of the sensor. sensor Angle: and press the buttons. About 30° in each direction of the front of the remote sensor. Specifications Specifications MODEL SECTION [Genral] [CD] [Tuner] AM F(MMW) [TAPE] LPC-LM730A/X LPC-LM735A/X Power supply Refer to the back Power consumption 30W Mass of the unit. 2.
P/NO : 3834RC0024M