LGEUA_LPC-LM730/735_ENG_28X MP3/CD CASSETTE RECORDER OWNER'S MANUAL MODEL: LPC-LM730A/X LPC-LM735A/X Please read this manual carefully before operating your set. Retain it for future reference. Designs and notice for specifications improvement. Internet address ; are subject to change http://ua.lge.
CAUTION Use of controls of RISK OF ELECTRIC procedures or adjustments other than those performance specified here- or in may result in hazardous radiation exposure. SHOCK DO NOT OPEN Laser CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE BACK) component in this product is capable of emitting radiation exceeding the limit for Class 1. COVER(OR NO USER SERVICEABLE PARTS CAUTION:INVISIBLE LASER RADIATION INSIDE.
Contents 1Introduction......................4 .4 SymbolsUsedinthisManual NotesonTapes....................4 . . . . . . . . . NotesonDiscs....................4 Handlingdiscs..................4 Storingdiscs...................4 Cleaningdiscs..................4 Front/RearPanel..................5 RemoteControl....................6 DisplayWindow....................6 2Installation.........................7 TheACPowerCordConnection . . . . . . . .7 .
Introduction 1 To ensure this proper use of this product, please read manual carefully and retain for Notes on on Discs owner 's future reference. Handling discs Do not touch the This manual the operation and maintenance of your CD player. Should the unit require service, contact an authorized provides service location and (refer information to on the disc get on by the playback side of the disc. Hold edges so that fingerprints do not the surface.
Front / Rear Panel 12 13 11 10 Introducin 1 2 9 3 3 8 7 456 14 15 19 18 16 1. POWER 2. ? CD SYNC. button ? FUNCTION SELECT buttons 3. 4. (STANDBY/ON) 17 button 13. (CD/TAPE) ? LEFT/RIGHT SPEAKER ? TAPE MODE button model : LPC-LM735A/X ? COUNTER RESET button ? ? TIMER button ? ? CLOCK button ? SET/CD PAUSE (CD [] ) XDSS button 6. CD DOOR 7. REMOTE SENSOR 8. DISPLAY WINDOW button bb / BB >) TAPE REWIND/FAST FORWARD (. CD SKIP/SEARCH (.
Remote Control Control 1. 14 1 2 13 X XDSS button 2. POWER button 3. TUNER/BAND button 4. This button is not available. 3 12 5. PRESET 4 5 11 6. CD FUNCTION buttons 10 6 9 ? PLAY/PAUSE ( B /[] ) ? CD button ? CD SKIP/SEARCH ? REPEAT button button (.
2 Installation The AC Power Cord Cord Connection Connection 1. Battery Installation Unit Before connecting the AC power cord, check operating voltage of your unit is identical with the voltage of your local power supplied. that the 2. Connect one (supplied) end of the AC power cord to the AC IN socket located at the backside of your unit. 3. Plug the other end into the wall outlet. 1. Press and open the 2.
Sound Sound Adjustment EQUALIZER PATTERN (EQ PATT.) XDSS button button SURROUND (SURR.) X MUTE button VOLUME ) Adjustment Press VOLUME button ( Volume button ,Remote control: (Unit: increase the sound level, or (Unit: ,Remote control: Sound Quality Adjustment You choose between 4 fixed sound can ) to press the VOLUME ) to decrease it. impres- sions. Select a button on desired sound mode by using EQ PATT. the remote control.
3 Operation Auto Function Selection Selection ? ? Using Using If you press CD PLAY/ PAUSE ( B /[] ) during listen to the radio, CD playback will begin. If you press PRESET ( ) or TUNER/ BAND during CD or CASSETTE play, radio When the matically elapsed. sleep the clock is CLOCK for used, the power is specified auto- time has In the display window you can see "90 SLEEP" for about 5 seconds. This means the the Clock Clock Press CLOCK.
T imer ? This function is automatically turned on and off 5. at the time you want. ? Select your desired radio station, press CD button and load a disc or press TAPE button and insert a TAPE. 6. 7. 1. Press CLOCK to check the current time. 8. by pressing on (-/+). Press SET to confirm the hour to switch Set the minute to switch TUNING/TIME For your reference If you don't set clock, timer function doesn't work. 2. Set the hour to switch TUNING/TIME on on. by pressing (-/+).
Presetting the the Radio Stations Stations Listening You 30 stations for FM and AM. 1. can Before preset Press TUNER/BAND to select the frequency that you have turned down the volume to the minimum. (FM or AM) you want. Every time you press this button, changes alternately. 1. The last received station is tuned in. tuning, make to to the the Radio sure Press TUNER/BAND to select the (FM or AM) you want. Every time you press this button, changes alternately. frequency FM and AM 2.
Tape Tape Playback Note: Use normal only tapes during playback. Recording Wind the Basic 1. ("NO Insert 4. (Z a by pushing EJECT) position. PUSH TAPE 1. ( B ) [or 2. Open To Rewind pressing Press TAPE MODE only] recording 1. or : LPC-LM730A/X model only After auto unit stop deck plays only front side, the stops automatically. Auto Reverse Deck model You by : LPC-LM735A/X only 2.
CD CD Program Play Playback Basic You 1. Press CD button to select CD function. 2. Press CD OPEN/CLOSE to open the disc 3. Load a (Z OPEN/ CLOSE) compartment. disc with the Close the disc 4. can arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks. Playback printed 1. side facing up and 2. ( B / [] ) button to 3. display. Playack Press CD PLAY/PAUSE ( B / [] ) button to pause during playback.
Maintenance and Service 4 the the Unit Unit Shipping Shipping Cleaning The original shipping carton and packing materiin handy. For maximum protection, re-pack the unit as it was originally packed at the factory if you need to ship it. als can come Cleaning Cleaning Use disc from the center out. the the Unit Unit soft, dry cloth when cleaning the player.
Reference 5 Remote Control Control Operation Operation Range Point the remote control at the remote Distance: About 23 ft remote (7 m) from the front of the sensor. sensor Angle: and press the buttons. About 30° in each direction of the front of the remote sensor.
P/NO : 3834RC0028X
