ENGLISH OWNER'S MANUAL Portable CD Cassette Recorder Please read this manual carefully before operating your set and retain it for future reference. MODEL LPC14 (LPC14) P/NO : MFL63266238 LPC14-ALKALL-Cover-ENG.indd 1 2010.1.
LPC14.AINDLLK-ENG 1/6/10 11:12 AM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LPC14.AINDLLK-ENG 2/19/10 5:34 PM Page 3 Power Source 2 1 1 1. Press and open the battery cover. 2. Put six “C” (R14) batteries (not supplied) into the compartment making sure the 3 and # should be correctly positioned. 3. Replace the battery cover.
LPC14.AINDLLK-ENG 1/6/10 11:12 AM Page 4 Main Unit Listening to the Radio ON UNIT 7 1 8 2 1. Select the radio function 2. Select either FM or AM FUNCTION switch 9 3 4 10 5 11 3. Select the radio station (FM or AM) BAND switch TUNING dial Listening to the radio - More you can do To turn off the radio 6 Set FUNCTION switch to TAPE or CD - USB (OFF), PORT. IN to turn off your unit. 12 13 1 USB connector 2 PORT.
LPC14.AINDLLK-ENG 1/6/10 11:12 AM Page 5 Listening to CDs Audio CD and MP3/ WMA CD can be played back in this unit. ON UNIT 1. Select the CD function 2. Open the CD door 3. Insert the CD : Label facing up. 4. Close the CD door 5. Start the CD playing 6. Stop a CD playing FUNCTION switch Z PUSH OPEN B [] x Listening to CDs - More you can do Pausing or restarting a CD 1 Press B[] on the unit during playback. 2 Press this button again to resume play.
LPC14.AINDLLK-ENG 1/6/10 11:12 AM Page 6 Listening to music from your portable player Using a USB device You can enjoy media files saved on a USB device by connecting the USB device to the USB port of the unit. If you want to operate other function, see the “Listening to CDs” section. ON UNIT 1. Connect the USB device to the USB port of the unit. - FUNCTION switch 3. Select a file you want to play. ./> 4. Start your media playing. B[] 5.
LPC14.AINDLLK-ENG 1/6/10 11:12 AM Page 7 Recording to TAPE Listening to cassette tapes ON UNIT 1. Select the TAPE function 2. Open the tape door 3. Insert the tape 4. Close the tape door 5. Start the tape playing 6. Stop a tape playing Cassette deck will automatically stop at the end of the tape You can record a various sound sources to TAPE. FUNCTION switch x/Z - b x/Z ON UNIT 1. Open the tape door 2. Insert a blank tape 3. Close the tape door 4. Select a mode in which you want to record 5.
LPC14.AINDLLK-ENG 1/6/10 11:12 AM Page 8 Specifications Troubleshooting Symptom Cause Correction POWER No power The power cord is not plugged in. Plug in the power cord. The batteries are not remaining. Change the batteries with a new one. RADIO No sound The function switch is not set to the Radio mode. Set the switch to the Radio mode. Some noise occurs. There are electronic devices near the player. Set the player far from the devices. An unplayable disc is inserted.
LPC14-ALKALL-Cover-ENG.indd 2 2010.1.
