Owner's Manual

6
PORTABLE MP3/CD CASSETTE RECORDER ] OWNER’S MANUAL
Listening to cassette tapes
1. Select the TAPE function
2. Open the tape door
3. Insert the tape
4. Close the tape door
5. Start the tape playing
6. To stop a tape playing
Cassette deck will automatically
stop at the end of the tape
FUNCTION
PUSH/EJECT
b / B
x
FUNCTION
BB
/
[]
x
Listening to cassette tapes - more you can do
To play during fast backward or Forward
After pressing .bb/BB> during playback, or stop, press b / B at a
point you want.
AUTO REVERSE MODE
You can set the tape to play one side , until the end of the tape or
both sides, by pressing MODE on the remote one or more times.
NOTES :
In case you use the tape for the first time push the PUSH EJECT to open
the tape door and then remove the cushion in it.
Listening to CDs
Listening to CDs - more you can do
Pause or restart a CD
Press CD PAUSE on the unit or
BB
/
[]
on the remote control during playback.
Press
BB
on the unit or
BB
/
[]
on the remote control to resume play.
Search for a section within a track
Press and hold .bb/BB> during playback .
Speed search for tracks
Press and hold .bb/BB> only in stop status. Track skips continuous-
ly in turn.
Skip to another track
Press .bb/BB> only in stop status .
Listen to your tracks in any order
Up to 40 tracks on a CD can be listened to in the order of your choice.
Insert a CD and wait for it to be read. Press and hold PROG then use
.bb/BB> to select the track. Press PROG again to save and select
the next track. Press
BB
/
[]
. To clear your selection, press
xx
twice. Playing
music using USB, you can also adjust this program.
Audio CD and MP3/WMA CD can be played back in this player.
1. Open the CD door:
2. Insert the CD: Label facing up.
3. Close the CD door:
4. Select the CD function:
5. Start the CD playing:
6. To stop a CD playing:
ON PLAYER ON REMOTE
Z CD OPEN
Z CD OPEN
FUNCTION
BB
xx
FUNCTION
BB
/
[]
xx
ON PLAYER ON REMOTE