Owner's Manual

9
Using your player as an alarm clock
1 Turn the power on.
2 Press and hold TIMER each function, EX) TUNER, CD.... flashes.
3 Press SET
.
when the function you want to be woken by is showing.
- If you choose “TUNER” you will be shown the stations you have saved as
presets. Use . bb/BB > on the unit to select the station you want,
Then press SET
.
on the unit.
4 Choose one of them by pressing SET
.
.
5 Then you can set the time you want the alarm to go on.
Press . bb/BB > to change the hours and minutes and SET
.
to
save.
6 “OFF TIME” will be displayed. Then, you can set the time you want the
function to stop. Press . bb/BB > to change the hours and minutes
and press SET
.
to save.
7 You will be shown the volume (VOL) you want to be woken by.
Use . bb/BB > to change the volume and SET
.
to save.
The clock icon “ ”shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
Note:
• You have to turn off the unit to use the alarm function.
• If you disconnect the power cord or remove the batteries, the alarm
function is not available.
• If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon “ ” by
pressing CLOCK even when the player is turned off.
Setting the Clock
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press
The clock setting is finished.
ON UNIT
11
/
]]
CLOCK
. bb/BB >
SET
.
. bb/BB >
SET
.
. bb/BB >
SET
.
LPC54-LGERA-ENG 2/2/10 11:30 AM Page 9