Owner's Manual

7
Precautions
The following steps of installation and connection
work should be done by qualified service person-
nel or system installers and should conform to all
local codes.
Be sure to switch the camera off before installation
and connection.
Do not install the camera near the air outlet of an
air conditioner.
Do not touch the dome cover’s window.
Mounting the Camera
The figures show an example of the camera mounted
on a ceiling or wall with a locally procured bracket.
Refer to the instructions included with the bracket for
filling gaps and holes with waterproof material.
Note: The camera have not been evaluated for wall
or ceiling mounting.
Removing the Sponge
Before mounting the camera, remove the sponge for
camera protection.
Caution: Remove the sponge carefully without
remainder of the sponge in the camera.
Ceiling mount
(LPT-EI551PS / LPT-EI553PS)
Installation
The Ceiling The Ceiling
Sponge
LPT-EP500_ENG 12/24/07 1:34 PM Page 7