Owner's Manual

20
Backlight Setting
Improves
an
image
that is darkened because of
backlighting.
Select
[BACKLIGHT] option
on the MENU
1,
then
select a value.
?
OFF: The back
light compensation
is not used.
?
ON: The back
light compensation
is used.
Color
Setting
You can switch the
displayed picture
to
grayscale
or
color.
Select
[COLOR] option
on the MENU
1,
then select
an
option (ON
or
OFF).
Set to
[ON]
to
display
the
picture
with color. Set to
[OFF]
to
display
the
picture
with
grayscale.
Negative Setting
You can use the
negative
effect.
Select
[NEGATIVE] option
on the MENU
1,
then
select an
option (ON
or
OFF).
Focus Mode
setting
Select
[FOCUS MODE] option
on the
[FOCUS]
menu,
then select the
following
mode.
?
PUSH AUTO: Auto-focus is activated
only
when
the Push Auto
key
on the controller is
pressed.
?
MANUAL/AUTO: Focus is activated
only
when the
FOCUS
(NEAR
or
FAR) keys
on the controller is
pressed.
Auto-focus is activated
automatically
while a manual
pan,
tilt or zoom
operation
is
performed.
Notes:
?
If
you press
the FOCUS
(NEAR
or
FAR)
button on
the controller while Auto-focus
mode,
the focus
mode is
automatically changed
to
[PUSH AUTO].
?
To avoid AF error or out of
Focus,initialization
of
LENS
system by using
the "Remote Reset"
command of Controller is
highly
recommended.
MENU 1
INITIAL SET ON
BACKLIGHT OFF
COLOR ON
NEGATIVE OFF
FOCUS PUSH AUTO
FLICKERLESS OFF
WBC MODE AUTO
MENU 1
INITIAL SET ON
BACKLIGHT OFF
COLOR ON
NEGATIVE OFF
FOCUS PUSH AUTO
FLICKERLESS OFF
WBC MODE AUTO
MENU 1
INITIAL SET ON
BACKLIGHT OFF
COLOR ON
NEGATIVE OFF
FOCUS PUSH AUTO
FLICKERLESS OFF
WBC MODE AUTO
MENU 1
INITIAL SET ON
BACKLIGHT OFF
COLOR ON
NEGATIVE OFF
FOCUS PUSH AUTO
FLICKERLESS OFF
WBC MODE AUTO
LPT-OS513AQ_ENG_0198
7/19/07
2:03
PM
Page
20