Owner's Manual

21
Flickerless
Setting
Use for
removing
the flicker of
picture.
Select
[FLICKERLESS] option
on the
MENU1,
then
select an
option (ON
or
OFF).
Set to
[ON]
to remove
the flicker.
Setting
the WBC
(White
Balance
Control)
Mode
You can select one of three modes for white balance
adjustment.
Select
[WBC MODE] option
on the
[AWB]
menu,
then
select the
following
mode.
?
AUTO
(Auto-Tracing
White
Balance):
In this
mode,
the color
temperature
is monitored
continuously
and
thereby
white balance is
automatically
set.
The color
temperature range
for the
proper
white
balance is
approximately
2,800
-
8,000°K.
Proper
white balance
may
not be obtained under the
following
conditions:
1)
The color
temperature
is out of the
2,800
-
8,000°K.
range.
2)
When the scene contains
mostly high
color
temperature objects,
such as a blue
sky
or
sunset.
3)
When the scene is dim.
?
SPECIAL: You can set the white balance
options
under the
special
WB condition
(Differ
from curve
of the control color
temperature). Adjust
Red and
Blue to
perform
a desired Auto White Balance.
1)
RED ADJUST: Obtains the
optimum
amount
of red
gain.
2)
BLUE ADJUST: Obtains the
optimum
amount
of blue
gain.
?
INDOOR: The color
temperature range
for the
proper
white balance is
approximately
3,200°K.
?
OUTDOOR: The color
temperature range
for the
proper
white balance is
approximately
5,100°K.
?
MANUAL: You can set the hue value
manually
for
white balance control.
(0
-
99)
?
PUSH AUTO: The White Balance will be
adjusted
automatically.
Set the PUSH
option
to ON or OFF.
ON: The White Balance will be
adjusted
automatically.
OFF: The White Balance is holded.
MENU 1
INITIAL SET ON
BACKLIGHT OFF
COLOR ON
NEGATIVE OFF
FOCUS PUSH AUTO
FLICKERLESS OFF
WBC MODE AUTO
MENU 1
INITIAL SET ON
BACKLIGHT OFF
COLOR ON
NEGATIVE OFF
FOCUS PUSH AUTO
FLICKERLESS OFF
WBC MODE AUTO
WBC MODE SPECIAL
RED
ADJUST
0
BLUE
ADJUST
253
WBC MODE PUSH AUTO
PUSH OFF
WBC MODE MANUAL
MWB CONTROL OFF
LPT-OS513AQ_ENG_0198
7/19/07
2:03
PM
Page
21