Owner's Manual

6
Power Source
The AC Power Cord Connection
1
Before
connecting
the
AC
power
cord,
check
that the
operating voltage
of
your
unit
is
identical with the
voltage
of
your
local
power
supplied.
2
Connect
one end of
the
AC
power
cord
(supplied)
to the
AC IN
socket located at the
backside of
your
unit.
3
Plug
the other
end
into the
wall
outlet.
ote
Unplug
the AC
power
cord from the wall outlet if
you
do not to use for an extended
period
of time.
Battery
Installation
UNIT
1
Press and
open
the
battery
cover.
2
Put
eight
"D"
(R20)
type
batteries
and four "AA"
(R6)
type
batteries into the
compartment making
sure
the
and are
correctly positioned.
3
Replace
the
battery
cover.
Remote Control
1
Press and
open
the
battery
cover.
2
Put two
"AAA"
(R03)
batteries into the
compartment.
3
Replace
the
battery
cover.
ote
?
To avoid
damage
from
possible battery leakage,
remove the batteries if
you
do not
plan
to use the unit
for an extended
period
of time.
?
When the batteries are
weak,
replace
all the batteries
with new ones.
?
During
the AC
power
cord connect to the wall
outlet,
the batteries are not worn out.
Adjusting
the
voltage
(OPTIONAL)
If
your
unit is
equipped
with a
voltage
selector at the
back
side,
be sure to set it to
your
local
power supplied
before
connecting
the AC
power
cord.
ote
?
"HELLO" indicator will be shown in the
display
when
you
connect the AC
power
cord to the wall outlet.
?
Press POWER to turn the main unit on.
(Press
it
again
to turn
off.)
Speaker
Connection
To
attach the
speaker
1
Position the
speaker guide
slots with the
guide
ribs on
the unit.
2
Gently push
the
speaker
downwards
until the
speaker
release lever
automatically
locks
the
speaker
into
place.
3
Plug
the
right
and
left
speaker
leads
into the
"R"
speaker
socket
and "L"
speaker
socket
located at the
backside of
your
main
unit.
To
detach the
speaker
1
Unplug
the
speaker
leads.
2
Press
the
speaker
release lever and slide
the
speaker up.
1
2
2
2
1
1