Owner’s Manual

12 INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors and drawers.
- Dimensions/Clearances LRDCS2603*
LDNS22220*
LRDNS2200*
LDN22470**
LDC22370**
LDCS22220*
A Depth without Handle 34" (864 mm) 32 1/2" (825 mm)
B Width 32 3/4" (833 mm) 29 3/4" (756 mm)
C Height to Top of Case 68 1/2" (1740 mm) 67 1/8" (1705 mm)
D Height to Top of Hinge 69 7/8" (1774 mm) 68 1/2" (1740 mm)
E Back Clearance 2" (50 mm) 2" (50 mm)
F Depth without Door 29 7/16" (748 mm) 29 1/8" (740 mm)
G Depth with Handle 35" (889 mm) 35 1/2" (901 mm)
H Depth (Total with Freezer Drawer Open) 53 3/8" (1355 mm) 56 1/4" (1440 mm)
I Depth (Total with Door Open 90°) 63 1/4" (1606 mm) 59" (1500 mm)