Owner’s Manual

ManualsBrandsLG ManualsBottom Mount Refrigerators33 Inch Bottom Mount Refrigerator with 25.50 cu.ft. Total Capacity, Internal Ice Maker, Adjustable Glass Shelves, Humidity-Controlled Crispers, Gallon Door Bins, Door Cooling+, Multi-Air Flow™ Technology, and Energy Star® Qualified: PrintProof™ Black Stai

Table Of Contents

19INSTALLATION

ENGLISH

• Remove the three bolts using a 13/32 in. (10

mm) socket wrench and lift off the top

hinge. Set parts aside.

CAUTION

• When lifting the hinge, be careful that the door

does not fall forward.

3 Lift the door from the middle hinge pin and

remove the door.

CAUTION

• Place the door, inside facing up, on a non-

scratching surface.

4 Remove the four screws a, the hinge pin

sleeve b, the hinge lever c and hinge

bracket

d from the bottom right side of the

door.

5 Turn the hinge lever a over and install it, the

hinge bracket

b, screws c, and hinge pin

sleeve

d on the bottom left side of the door.

6 Use a 1/4 in. (6.35 mm) hex socket wrench to

loosen the hinge pin a and remove it. Use a

3/16 in. (5 mm) Allen wrench and a Phillips

screwdriver to remove the two Allen-head b

and one Phillips-head

c screws. Remove the

hinge

d.

7 With a flat-head screwdriver, carefully pry off

and remove the cover over the bolt holes on

the left side of the refrigerator.

8 Remove the outer lower decorative screw

from the flange on the frame between the

freezer and refrigerator doors. (You will need

this hole for the middle hinge.)