Owner’s Manual
ManualsBrandsLG ManualsBottom Mount Refrigerators33 Inch Bottom Mount Refrigerator with 25.50 cu.ft. Total Capacity, Internal Ice Maker, Adjustable Glass Shelves, Humidity-Controlled Crispers, Gallon Door Bins, Door Cooling+, Multi-Air Flow™ Technology, and Energy Star® Qualified: PrintProof™ Black Stai
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
20 INSTALLATION
9 Flip the middle hinge bracket a and position
it on the left side of refrigerator. Insert two
Allen-head screws
c and the Phillips-head
screw
b.
10 Insert the hinge pin a using a 1/4 in. (6.35
mm) socket wrench.
NOTE
• The bracket b has been flipped, but the hinge
pin
a stays in the same orientation with its
hexagonal end facing upward.
11 Insert the decorative screw a into the outer
hole on the flange along the right front side.
Insert the cover b over the 2 open bolt holes
on the right side. The cover is force-fitted.
12 Loosen the two screws and remove the left
hinge cap.
13 Place the refrigerator door down over the
hinge pin on the middle hinge pin bracket.
NOTE
• The left top hinge, right hinge cap, and left hinge
cover are provided for reversing doors.
14 Type A
• Fit the hinge
a over the hinge lever latch b
and slot it into place. Rotate the lever
c
clockwise to secure the hinge. Assemble the
left hinge cover with the two screws
d.
Type B
• Line up the left top hinge with the holes in
the top of the refrigerator. Use the three
bolts to replace the hinge. Assemble the left
hinge cover with the two screws.
15 Assemble the right hinge cap with the two
screws.