Owner’s Manual
ManualsBrandsLG ManualsBottom Mount Refrigerators33 Inch Bottom Mount Refrigerator with 25.50 cu.ft. Total Capacity, Internal Ice Maker, Adjustable Glass Shelves, Humidity-Controlled Crispers, Gallon Door Bins, Door Cooling+, Multi-Air Flow™ Technology, and Energy Star® Qualified: PrintProof™ Black Stai
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
30 OPERATION
Glide‘N’Serve
Using the Pantry Drawer
This drawer can be used for large party trays, deli
items, and beverages. This drawer should not be
used to store vegetables that require high
humidity.
CAUTION
• Do not place any items on the Pantry Drawer
cover.
Detaching/Assembling the
Glide‘N’Serve
1 To remove the Glide'N'Serve, pull out the
drawer until it stops, lift the front up, and pull
straight out.
2 To assemble, slightly tilt up the front, insert
the drawer into the frame and push it back
into place.
Refrigerator Shelves
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Detaching/Assembling Shelves
The type of shelves may differ from model to
model.
CAUTION
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
Half-width Shelf
1 To detach a shelf, hold the adjoining shelf so
that it does not move.
2 Pull the two shelves apart in the middle and
tilt up the front of the shelf you want to
remove until it's free from the other shelf.
3 Support the shelf from the bottom and lift it
straight up.