Owner's Manual

26
OPERATION
Changing Oven Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to work
properly.
Model LRGL5825*
1
Press Clock.
2
Press numbers to enter the time.
3
Press Start.
Model LRGL5823* / LRGL5821*
1
Press Clock.
2
Press the +/– buttons to set the time.
3
Press Start.
NOTE
•
The time of day cannot be changed during a
timed baking or self-clean cycle (available on
some models).
•
To check the time of day when the display is
showing other information, press Clock.
•
If no other keys are pressed within 25 seconds
of pressing Clock, the display reverts to the
original setting.
•
If the display time is blinking, you may have
experienced a power failure. Reset the time.
Minimum & Maximum Default
Settings
All of the features listed have a minimum and a
maximum time or temperature setting that can be
entered into the control. A beep sounds each time a
button is pressed.
Two short tones sound if the entry of the temperature
or time is below the minimum or above the maximum
setting for the feature.
Feature
min.
Temp. /
Time
max.
Temp. /
Time
Default
Clock
12 Hr.
1:00
Hr. / min.
12:59
Hr. / min.
24 Hr.
0:00
Hr. / min.
23:59
Hr. / min.
Timer
(LRGL5825*)
0:01
min. / sec.
11:59
Hr. / min.
Timer
(LRGL5823*/
LRGL5821*)
0:10
min. / sec.
11:59
Hr. / min.
Cook Time 0:01 min.
11:59
Hr. / min.
*Conv. Bake
300 °F /
150 °C
550 °F /
285 °C
350 °F
(• 325 °F)/
12 Hr.
*Conv. Roast
300 °F /
150 °C
550 °F /
285 °C
350 °F
(• 325 °F)/
12 Hr.
Broil Lo Hi
Hi /
3 Hr.
Bake
170 °F /
80 °C
550 °F /
285 °C
350 °F /
12 Hr.
Favorite
①
-
Bread
170 °F 550 °F
375 °F /
12 Hr.
Favorite
②
-
Meat
300 °F 550 °F
325 °F /
12 Hr.
Favorite
③
-Chicken
300 °F 550 °F
350 °F /
12 Hr.
Frozen Meal 300 °F 550 °F
400 °F /
12 Hr.
Air Fry 300 °F 550 °F
400 °F /
12 Hr.
Slow Cook Lo Hi
Hi /
12 Hr.
Proof 12 Hr.
Warm 3 Hr.
Self Clean
(on some
models)
3 Hr. 5 Hr. 4 Hr.
EasyClean
®
10 min.
* Using Auto Conversion (Model LRGL5825*/
LRGL5823*)
•
Default cook mode times are without setting cook
time.
Secondary Function Input Guide
(Settings, Wi-Fi)
•
To activate a button’s secondary function, press
and hold the center of the button for 3 seconds, not
over the name of the secondary function.
•
The buttons may not work properly if pressed too
far from the center.