Owner's Manual

13INSTALLATION
ENGLISH
Dimensions and Clearances
•
Check the dimensions of the appliance and the
installation path to ensure there is sufcient room to
move the refrigerator through doors or narrow
openings.
•
The installation location chosen for the refrigerator
should allow space behind the unit for connections
and airow and space above it to open the door.
•
Too small of a distance from adjacent items may
result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2
inches (50.8 mm) between the back of the
refrigerator and the wall.
•
Remember to allow enough room above the
refrigerator to fully open the door.
E
D
A
C
B
F
- Dimensions/
Clearances
LRKNC0505V
A Width 26 1/4″ (666 mm)
B Height to Top of
Cover
35 7/16″ (900 mm)
C Height to Top of
Case
33″ (837 mm)
D Back Clearance 2″ (50 mm)
E Depth 24″ (612 mm)
F Height with Door
Open
56 57/64″ (1445 mm)
Leveling
For proper operation, make sure the product is level,
with all leveling legs in firm contact with the floor. If
the product seems unsteady, adjust the leveling legs.
The leveling legs can be turned easily by tipping the
cabinet slightly. Turn the legs to the left to raise the
product or to the right to lower it.
Turning on the Power
•
After installing, plug the refrigerator’s power cord
into a 3-prong grounded outlet and push the
refrigerator into the nal position.
CAUTION
•
Connect to a rated power outlet.
•
Have a certied electrician check the wall outlet
and wiring for proper grounding.
•
Do not damage or cut off the ground terminal of
the power plug.