OWNER'S MANUAL FRENCH DOOR REFRIGERATOR Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH LRMDS3006* / LRMVS3006* / LRMDC2306* / LRMVC2306* / LLMXS3006* MFL69497032 Rev.07_061521 www.lg.com Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 3 3 6 READ ALL INSTRUCTIONS BEFORE USE WARNING CAUTION 7 PRODUCT OVERVIEW 7 Product Features 11 INSTALLATION 11 12 14 15 20 23 25 Before Installing Choosing the Proper Location Removing/Assembling Handles Removing/Assembling Doors and Drawers Connecting the Water Line Leveling and Door Alignment Turning on the Power 26 OPERATION 26 27 29 30 31 32 34 35 36 37 38 39 39 40 Before Use Control Panel Sabbath Mode Ice and Water Dispenser Ice Compartme
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.
IMPORTANT SAFETY INSTRUCTIONS • Do not bend or pinch the power cord excessively or place heavy objects on it. Operation • This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses and by clients in hotels, motels and other residential type environments; - bed and breakfast type environments; - catering and similar non-retail applications.
IMPORTANT SAFETY INSTRUCTIONS 5 Maintenance • Do not use a hair dryer to dry the inside of the refrigerator. • Do not light a candle to remove odors in the refrigerator. • Keep flammable materials and vapors, such as gasoline, away from the refrigerator.
IMPORTANT SAFETY INSTRUCTIONS Risk of Fire and Flammable Materials This appliance contains a small amount of isobutane refrigerant (R600a), which is combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes could ignite or cause an eye injury.
PRODUCT OVERVIEW 7 PRODUCT OVERVIEW The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Exterior a Control Panel Sets the refrigerator temperature and freezer temperature, the water filter condition and the dispenser mode. b Filtered Water and Ice Dispenser Dispenses purified water and ice. c SmartPull™ Handle Easily opens the freezer door.
PRODUCT OVERVIEW Interior Standard Door : LLMXS3006* Door-in-Door: LRMDS3006* / LRMDC2306*
PRODUCT OVERVIEW 9 InstaView Door-in-Door: LRMVS3006* / LRMVC2306* ENGLISH a LED Interior Lighting Lights up the inside of the refrigerator. b Air Filter Reduces odors inside the refrigerator compartment. c In-Door Icemaker (Refrigerator) This is where ice is automatically produced and stored. d Door Mullion Prevents the cold air in the refrigerator from escaping when the doors are closed.
PRODUCT OVERVIEW j Cheese & Butter and Condiment Bins Cheese & Butter and Condiment bins are specially designed for these items, making spreading butter and slicing cheese easier. k Adjustable Refrigerator Shelf The refrigerator shelves are adjustable to meet individual storage needs. l Folding Shelf Store taller items, such as gallon containers or bottles, by pushing the front half of the shelf underneath the back half of the shelf.
INSTALLATION 11 INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location. a Unpacking the Refrigerator b Choosing the Proper Location c Disassembling/Assembling d Connecting the Water Line e Leveling and Door Alignment WARNING • Connect to potable water supply only.
INSTALLATION Unpacking the Refrigerator install a booster pump to compensate for the low pressure. WARNING • Use two or more people to move and install the refrigerator. Failure to do so can result in back injury or other injury. • The refrigerator is heavy. Protect the floor when moving the refrigerator for cleaning or service. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.
INSTALLATION 13 Dimensions and Clearances • Check the dimensions of the appliance and the installation path to ensure there is sufficient room to move the refrigerator through doors or narrow openings. • The installation location chosen for the refrigerator should allow space behind the unit for connections and airflow and space in front to open the doors and drawers. • Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges.
INSTALLATION Removing/Assembling Handles These instructions are for models which ship with the handles assembled. For models shipped with the handles disassembled, follow the instructions included in the handle package. • Tools Needed Assembling Refrigerator Handles 1 If needed, reassemble the mounting fasteners a on the door with a 1/4 in. Allen wrench. 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws b with a 3/32 in.
INSTALLATION 15 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws b with a 1/8 in. Allen wrench. located at the bottom of the front side of the cover with a flat-head screwdriver. ENGLISH • For models shipped with the handlesdisassembled, use a 3/32 in. Allen wrench. Removing the Left Refrigerator Door 1 The water supply is connected to the upper right part of the rear surface of the refrigerator.
INSTALLATION 3 Rotate the hinge lever i counterclockwise. Lift the top hinge j free of the hinge lever latch k. CAUTION • When lifting the hinge free of the latch, be careful that the door does not fall forward. 2 Rotate the hinge lever c clockwise. Lift the top hinge d free of the hinge lever latch e. CAUTION 4 Lift the door from the middle hinge pin and remove the door. • When lifting the hinge free of the latch, be careful that the door does not fall forward.
INSTALLATION 17 • Be careful of sharp hinges on both sides of the drawer. 5 • Do not sit or stand on the freezer drawer. • To prevent accidents, keep children and pets away from the drawer. Do not leave the drawer open. If the Durabase® storage bin is removed from the freezer drawer, there is sufficient space for a small child or pet to crawl inside. 1 Pull the drawer open to full extension. 2 Gently lift and pull out the ice bin.
INSTALLATION Assembling the Freezer Drawer 1 2 Pull out both rails simultaneously, until they are fully extended. Grasp the drawer on each side and hook the drawer supports into the rail tabs located on both sides. 4 Insert the drawer into the frame, and push the drawer back until it clicks into place. 5 Replace the ice bin in the drawer. Insert the Durabase basket in the rail assembly. CAUTION • Do not hold the handle when removing or replacing the drawer.
INSTALLATION 19 2 Pull the drawer open to full extension. Lower the basket onto the rails. ENGLISH NOTE • The number of wire harnesses may vary depending on the model. Assembling the Right Refrigerator Door CAUTION • Install the right-side door first. 1 2 3 Make sure that the plastic sleeve is inserted in the bottom of the door. Lower the door onto the middle hinge pin as shown in the figure. • Ground wire is only present on some models.
INSTALLATION Assembling the Hinge Cover Position the hinge cover in its place. Insert and tighten the cover screws. 4 Push the water supply lines into the hole on the top case and pull them through the backplate. Connecting the Water Line Before Beginning This water line installation is not covered by the refrigerator warranty. Follow these instructions carefully to minimize the risk of expensive water damage.
INSTALLATION 21 • Where reverse osmosis water filtration system is connected to a cold water supply: fitting with a tube cutter and use a compression fitting. If the water pressure from the reverse osmosis system is less than 20 psi or 138 kPa or 1.4 kgf/cm2 (takes more than 4 seconds to fill a cup of 7 oz or 198 cc capacity): • Check to see if the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.
INSTALLATION 5 Tighten the pipe clamp. • Tighten the clamp screws until the sealing washer begins to swell. NOTE 3 Drill the hole for the valve. • Do not over tighten the clamp or you may crush the tubing. • Drill a ¼ in. hole in the water pipe using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe. Be careful not to allow water to drain into the drill. Failure to drill a ¼ in. hole may result in reduced ice production or smaller cubes.
INSTALLATION 23 • Insert the end of the copper tubing into the connection as far as possible. While holding the tubing, tighten the fitting. ENGLISH a Saddle-Type Shutoff Valve b Compression Nut c Packing Nut d Outlet Valve e Ferrule (sleeve) 8 Flush out the tubing. • Turn the main water supply on and flush out the tubing until the water is clear. Shut the water off at the water valve after about one quart of water has been flushed through the tubing. a Tubing Clamp b ¼ in. Tubing c ¼ in.
INSTALLATION 1 Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. NOTE • A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten. Door Alignment (Door-in-Door Model) Left Refrigerator Door The left refrigerator door has an adjustable nut, located on the bottom hinge, to raise and lower the door for proper alignment.
INSTALLATION 25 ENGLISH Turning on the Power • After installing, plug the refrigerator’s power cord into a 3-prong grounded outlet and push the refrigerator into the final position. CAUTION • Connect to a rated power outlet. • Have a certified electrician check the wall outlet and wiring for proper grounding. • Do not damage or cut off the ground terminal of the power plug.
OPERATION OPERATION Before Use Checklist Clean the refrigerator. Clean the refrigerator thoroughly and wipe off all dust that accumulated during shipping. CAUTION • Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the refrigerator. Remove adhesive residue by wiping it off with your thumb or dish detergent.
OPERATION 27 Control Panel Depending on the model, some of the following functions may not be available. Control Panel Features a Ice Plus This function increases both ice making and freezing capabilities. Press the Ice Plus button to illuminate the icon and activate the function for 24 hours. The function automatically shuts off after 24 hours. Stop the function manually by pressing the button once more. b Smart Grid Press the Smart Grid button to turn the function On/Off.
OPERATION NOTE • Replace the air filter when the g icon turns on. After replacing the air filter, press and hold the Fresh Air Filter button for three seconds to turn the icon light off. Replace the air filter approximately every six months. f Lock The lock function disables every other button on the display. • When power is initially connected to the refrigerator, the lock function is off.
OPERATION 29 3 Press the Freezer button repeatedly to toggle between the 3 ICE and 6 ICE modes. After 5 seconds of idle time, the last mode set will be saved, and the display will return to normal. ENGLISH NOTE • For more ice, select the 6 ICE mode. For clearer ice, select the 3 ICE mode. NOTE Display Mode and InstaView Display Mode (For Store Use Only) • The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while on display in a retail store.
OPERATION NOTE • Once turned on, Sabbath mode is maintained even after a power outage. • Selecting Sabbath mode automatically turns off the alarm functions. • The dispenser and InstaView are disabled in Sabbath mode, on applicable models. Ice and Water Dispenser Before Using the Ice and Water Dispenser CAUTION • Dispense ice into a glass before filling it with water or other beverages. Splashing may occur if ice is dispensed into a glass that already contains liquid.
OPERATION 31 Locking the Ice and Water Dispenser Cleaning the Dispenser Cleaning the Ice and Water Outlet Wipe the water outlet a or ice outlet b frequently with a clean, lint free cloth as it may get dirty easily. The icemaker stops producing ice when the indoor ice bin is full. To make room for additional ice, empty the ice bin into an extra ice bin in the freezer compartment.
OPERATION 2 To remove the in-door ice bin, grip the front handle, slightly lift the bottom, and slowly pull out the bin as shown. Before Using the In-Door Icemaker NOTE • Ice is made in the automatic in-door icemaker and sent to the dispenser. The icemaker produces 70 - 182 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions.
OPERATION 33 CAUTION • Do not insert round ice into the in-door ice bin, as it can damage the ice and water dispenser. • In the event of a power outage, throw away the ice stored in the ice bin. NOTE Freezer Icemaker (Cubed Ice) • The icemaker begins producing ice approximately 48 hours after the appliance is initially installed. The first batches of ice may not be round and clear. This feature is only available on some models.
OPERATION • The icemaker water valve buzzes as the icemaker fills with water. If the icemaker power button is in the ON position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, press the icemaker power button to turn it off. • Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or personal injury if items are removed with excessive force.
OPERATION 35 could come into direct contact with the cold air and freeze. • If the refrigerator is kept in a hot and humid place, frequent opening of the door or storing a lot of vegetables in the refrigerator may cause condensation to form. Wipe off the condensation with a clean cloth or a paper towel. Storing Frozen Food Check a freezer guide or a reliable cookbook for further information about preparing food for freezing or food storage times.
OPERATION 2 Lift the front of the cover up with both hands until it detaches from the back wall of the cabinet, then pull it out. 5 Insert the cover into the refrigerator with both hands and lower it onto the guides. 6 Line up the tabs on the Door-in-Door case with the slots on the door and push down until it snaps into place. NOTE • The Door-in-Door feature is only available on some models. 3 Pull out the crisper to full extension, lift the front up, and pull straight out.
OPERATION 37 underneath the back half of the shelf. Pull the front of the shelf forward to return to a full shelf. 4 Lower the front of the shelf so that the hooks drop into the slots. CAUTION • Glass shelves are heavy. Use special care when removing them. • Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact. InstaView This feature is only available on some models.
OPERATION To access the InstaView Door-in-Door compartment, lightly press the button on the right refrigerator door handle. 2 Door-in-Door This feature is only available on some models. To replace the door bins, slide the door bin in above the desired support and push down until it snaps into place. Using the EasyLift Bin This feature is only available on some models. The Door-in-Door compartment allows for easy access to commonly used food items.
OPERATION 39 CAUTION ENGLISH • Empty contents of EasyLift Bin before raising or lowering it to avoid personal injury or damage tothe bin or its contents. • If the bin is not level after adjusting it, gently raise it until it clicks into place. Door-in-Door Case To open the Door-in-Door case, press on the area marked Pull to open. The case is removable for easy cleaning and adjustment. Door Bins Detaching/Assembling the Door Bin The door bins are removable for easy cleaning and adjustment.
OPERATION from side to side to accommodate items of different sizes. • If storing meat or fish for more than a few days, store it in the freezer. Freezer Mode To use the convertible drawer as a freezer, press the Select/Freezer button a for at least 3 seconds. Once the convertible drawer is set to freezer mode, its temperature matches the freezer temperature. WARNING • If the Durabase divider is removed, there is enough open space for children or pets to crawl inside.
SMART FUNCTIONS 41 SMART FUNCTIONS This feature is only available on models with Wi-Fi. The LG ThinQ application allows you to communicate with the appliance using a smartphone. Before Using LG ThinQ Application 1 • If the distance between the appliance and the wireless router is too far, the signal becomes weak. It may take a long time to register or fail to install the application.
SMART FUNCTIONS NOTE • If the appliance cannot be registered due to problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again. • If the firewall on your wireless router is enabled, disable the firewall or add an exception to it. • The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.
SMART FUNCTIONS 43 FCC RF Radiation Exposure Statement This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. Industry Canada Statement This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s).
SMART FUNCTIONS If the refrigerator receives a Demand Response signal, the refrigerator will operate in Delay Appliance Load (DAL) or Temporary Appliance Load Reduction (TALR) mode. Please check the detailed specifications on the notice page on us.smartthinq.com. Delay Appliance Load (DAL) • Demand Response The refrigerator responds to a DAL signal by providing a moderate load reduction for the duration of the delay period.
SMART FUNCTIONS 45 Using Audible Diagnosis to Diagnose Issues • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application. 1 Hold the Lock button for three seconds. • If the display has been locked for over five minutes, you must deactivate the lock and then reactivate it. 2 Open the right refrigerator door.
MAINTENANCE MAINTENANCE Cleaning WARNING • Use non-flammable cleaner. Failure to do so can result in fire, explosion, or death. CAUTION • Do not use an abrasive cloth or sponge when cleaning the interior and exterior of the refrigerator. • Do not place your hand on the bottom surface of the refrigerator when opening and closing the doors. General Cleaning Tips • Both the refrigerator and freezer sections defrost automatically; however, clean both sections once a month to prevent odors.
MAINTENANCE 47 2 Remove the filter from the inside of the cover by pressing the side of the filter in and pulling the center out. Before Replacing the Water Filter WARNING • To reduce the risk associated with choking, do not allow children under 3 years of age to have access to small parts during the installation of this product. 3 Place the new filter inside of the cover with the side that says FRONT facing outward.
MAINTENANCE lines up with the arrow on the filter head. Swing the filter back into the compartment. CAUTION • Do not install systems in areas where ambient temperatures may go above 110° F (43.3° C). • Where a backflow prevention device is installed on a water system, a device for controlling pressure due to thermal expansion must be installed. • Ensure all tubing and fittings are secure and free from leaks. 4 Replace the door bin.
MAINTENANCE 49 Performance Data Sheet Model: LT1000P, LT1000PC, LT1000PCS NSF System Trade Name Code: MDJ64844601 System tested and certified by NSF International against NSF/ANSI Standard 42, Standard 53 and Standard 401 for the reduction of substances listed below. Avg % Reductio n Average Product Water Concentrati on Max Permissible Product Water Concentrati on NSF Reduction Requireme nts 2.0 μg/L± 10% >97.5% 0.050 μg/L N/A 2 50.00% 12,000,00 0 pts/mL At least 10,000 particles/mL 99.
MAINTENANCE Avg % Reductio n Average Product Water Concentrati on Max Permissible Product Water Concentrati on NSF Reduction Requireme nts 1400 ± 40% ng/L 98.40% 25.60 ng/L 200 ng/L NA 1600 ng/L 1400 ± 40% ng/L 97.10% 46.40 ng/L 200 ng/L NA Trimethoprim 170 ng/L 140 ± 40% ng/L >96.80% 5.44 ng/L 20 ng/L NA Linuron 160 ng/L 140 ± 40% ng/L >96.60% 5.44 ng/L 20 ng/L NA Phenytoin 200 ng/L 200 ± 40% ng/L >94.80% 10.
TROUBLESHOOTING 51 TROUBLESHOOTING Frequently Asked Questions Q: What are the best temperature settings for my refrigerator and freezer? A: The default setting for the refrigerator is 37° Fahrenheit (3° Celsius). The default setting for the freezer is 0° Fahrenheit (-18° Celsius). Adjust these settings as necessary to keep food at desired temperatures. Milk should be cold when stored on the inner shelf of the refrigerator. Ice cream should be firm and ice cubes should not melt in the freezer.
TROUBLESHOOTING Before Calling for Service Review this section before calling for service; doing so will save you both time and money. Cooling Problem Refrigerator is not cooling or has no power. Possible Cause & Solution A fuse in your home may be blown or the circuit breaker tripped. Or the appliance is connected to a GFCI (Ground Fault Circuit Interrupter) outlet, and the outlet's circuit breaker has tripped. • Check the main electrical box and replace the fuse or reset the circuit breaker.
TROUBLESHOOTING 53 Problem Cooling system runs too much. Possible Cause & Solution Refrigerator is replacing an older model. Refrigerator was recently plugged in or power restored. • The refrigerator will take up to 24 hours to cool completely. The door is opened often or a large amount of food / hot food was added. • Adding food and opening the door warms the refrigerator, requiring the compressor to run longer in order to cool the refrigerator back down.
TROUBLESHOOTING Problem Possible Cause & Solution Refrigerator or Freezer section is too cold. Incorrect temperature control settings. Frost or ice crystals form on frozen food (inside of sealed package). Condensation from food with a high water content has frozen inside of the food package. • If the temperature is too cold, adjust the control one increment at a time and wait for the temperature to stabilize. Refer to the Control Panel for more information.
TROUBLESHOOTING 55 Craft Ice Problem Possible Cause & Solution Refrigerator was recently installed or icemaker recently connected. Icemaker is not making enough ice. In 3 ICE mode, the Craft Ice icemaker produces 1 batch of round ice about every 24 hours. • The icemaker begins producing ice approximately 48 hours after the appliance is initially installed. The first batches of ice may not be round and clear. • For more ice, select the 6 ICE mode which produces 2 batches every 24 hours.
TROUBLESHOOTING Problem Icemaker is not making ice Possible Cause & Solution Refrigerator was recently installed or icemaker recently connected. • It may take up to 24 hours for each compartment to reach the desired temperature and for the icemaker to begin making ice. Icemaker is not turned on. • Locate the icemaker ON/OFF and confirm that it is turned on. The ice detecting sensor is obstructed. • Foreign substances or frost on the ice-detecting sensor can interrupt ice production.
TROUBLESHOOTING 57 Problem Ice is not dispensing. Possible Cause & Solution Unable to hear the sound of ice coming out? Doors are not closed completely. • Ice will not dispense if any of the refrigerator doors are left open. Infrequent use of the dispenser. • Infrequent use of the ice dispenser will cause the cubes to stick together over time, which will prevent them from properly dispensing. Check the ice bin for ice cubes clumping/ sticking together.
TROUBLESHOOTING Problem Water is not dispensing. Possible Cause & Solution New installation or water line recently connected. • Dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. Do not dispense the entire 2.5 gallon amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. The dispenser panel is locked.
TROUBLESHOOTING 59 Problem Water has bad taste or odor. Possible Cause & Solution Water supply contains minerals such as sulfur. • A water filter may need to be installed to eliminate taste and odor problems. • Replacing the water filter is recommended: - Approximately every six months. - When the water filter indicator turns on. - When the water dispenser output decreases. - When the ice cubes are smaller than normal. Refrigerator was recently installed. • Dispense 2.
TROUBLESHOOTING Problem The interior of the refrigerator is covered with dust or soot. Possible Cause & Solution The refrigerator is located near a fire source, such as a fireplace, chimney, or candle. • Make sure that the refrigerator is not located near a fire source, such as a fireplace, chimney or candle. Noises Problem Clicking Possible Cause & Solution The defrost control will click when the automatic defrost cycle begins and ends.
TROUBLESHOOTING 61 Wi-Fi Problem The password for the Wi-Fi network was entered incorrectly. • Delete your home Wi-Fi network and begin the registration process again. • If you are connecting to an iPhone, the password to connect to the module in the refrigerator is the last 4 characters of the network name, repeated twice. Mobile data for your smartphone is turned on. • Turn off the Mobile data on your smartphone before registering the appliance. The wireless network name (SSID) is set incorrectly.
LIMITED WARRANTY LIMITED WARRANTY USA TERMS AND CONDITIONS ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY 63 • Damage or failure of the Product to perform during power failures and interrupted or inadequate electrical service. • Damage or failure of the Product resulting from operating the Product in a corrosive atmosphere or contrary to the Product owner’s manual. • Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of nature, or any other causes beyond the control of LG.
LIMITED WARRANTY regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty. Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc.
LIMITED WARRANTY 65 You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty.
LIMITED WARRANTY Canada TERMS AND CONDITIONS ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS THE LAWS OF YOUR PROVINCE OR TERRITORY DO NOT PERMIT THAT, OR, IN OTHER JURISDICTIONS, IF YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY 67 THIS LIMITED WARRANTY DOES NOT COVER: • Service trips to i) deliver, pick up, or install or; educate on how to operate the Product; ii) correct wiring or plumbing; or iii) correct unauthorized repairs or installations of the Product; • Damage or failure caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air; • Damage or failure resulting from operating the Product in a corrosive atmosphere or
LIMITED WARRANTY PROCEDURE FOR RESOLVING DISPUTES: EXCEPT WHERE PROHIBITED AT LAW, ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. EXCEPT WHERE PROHIBITED AT LAW, YOU AND LG BOTH IRREVOCABLY AGREE TO WAIVE THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION. Definitions.
LIMITED WARRANTY 69 Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely (1) on the basis of documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the applicable arbitration rules. If your claim exceeds $25,000, the right to a hearing will be determined by the applicable arbitration rules.
Memo
Memo 71
Memo
Memo 73
Memo
Memo 75
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: 1-800-243-0000 1-888-542-2623 U.S.A. CANADA Register your product Online! www.lg.
