Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Choosing the Proper Location
- Removing/Assembling Handles
- Removing/Assembling Doors and Drawers
- Removing the Hinge Cover
- Removing the Left Refrigerator Door
- Removing the Right Refrigerator Door
- Removing the Freezer Drawer
- Removing the Full Convert Drawer
- Assembling the Freezer Drawer
- Assembling the Full Convert Drawer
- Assembling the Right Refrigerator Door
- Assembling the Left Refrigerator Door
- Assembling the Hinge Cover
- Connecting Refrigerator to Water Supply
- Leveling and Door Alignment
- Turning on the Power
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
17INSTALLATION
ENGLISH
• Be careful of sharp hinges on both sides of the
drawer.
• When you lay the drawer down, be careful not to
damage the floor.
• Do not sit or stand on the freezer drawer.
• To prevent accidents, keep children and pets
away from the drawer. Do not leave the drawer
open. If the Durabase
®
storage bin is removed
from the freezer drawer, there is sufficient space
for a small child or pet to crawl inside.
1 Pull the drawer open to full extension.
2 Gently lift and pull out the ice bin.
3 Lift the front of the drawer up, then pull it
straight out.
4 Remove the Durabase basket from the rails.
Remove the screws from the rails at both
ends.
5 Grip both sides of the drawer and pull it up to
remove it from the rails.
CAUTION
• Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
6 Hold both rails and push them in
simultaneously.
Removing the Full Convert Drawer
1 Pull the drawer open to full extension.
Remove the basket from the rails.
2 Hold both sides of the door and remove it
from the rails.










