Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Choosing the Proper Location
- Removing/Assembling Handles
- Removing/Assembling Doors and Drawers
- Removing the Hinge Cover
- Removing the Left Refrigerator Door
- Removing the Right Refrigerator Door
- Removing the Freezer Drawer
- Removing the Full Convert Drawer
- Assembling the Freezer Drawer
- Assembling the Full Convert Drawer
- Assembling the Right Refrigerator Door
- Assembling the Left Refrigerator Door
- Assembling the Hinge Cover
- Connecting Refrigerator to Water Supply
- Leveling and Door Alignment
- Turning on the Power
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
35OPERATION
ENGLISH
2 Lift the front of the cover up with both hands
until it detaches from the back wall of the
cabinet, then pull it out.
3 Pull out the crisper to full extension, lift the
front up, and pull straight out.
4 To reassemble, slightly tilt up the front, insert
the crisper into the frame and push it back
into place.
5 Insert the cover into the refrigerator with
both hands and lower it onto the guides.
6 Line up the tabs on the Door-in-Door case
with the slots on the door and push down
until it snaps into place.
NOTE
• The Door-in-Door feature is only available on
some models.
Refrigerator Shelves
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Using the Folding Shelf
This feature is only available on some models.
Store taller items, such as a gallon container or
bottles, by pushing the front half of the shelf