Owner's Manual

26
Installation
3
Installation
System settings
Properties
• System Name: Enter the system name by using alphabetic letter,
numeric digit and symbols up to 21 characters. The number of
maximum characters is depends on the language.
• Language: Select a language for the setup menu and
information display.
• Button Beep: Marks up to activate the button beep. The button
beep is activated when using the buttons.
• Resolution: Sets the output resolution of the video signal.
• Configuration Import: Import the system configuration data
from the USB memory stick.
• Configuration Export: Export the configuration data from this
system to the USB memory stick.
• Factory Default: You can reset the system to its original factory
settings. Some options cannot be reset (date, time, daylight
saving, time zone and user password settings).
TCP/IP v4
• Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
• DHCP: Select this option when a DHCP server is installed on the
network to allow IP address assignment. With this setting, the IP
address is assigned automatically.
• IP Address: Enter the IP address.
• Subnet Mask: Enter the subnet mask address.
• Gateway: Enter the gateway address.
• Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
• Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.
TCP/IP v6
• Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
• Auto: Select this option to assign the IP address automatically.
• IP Address: Enter the IP address.
• Subnet Prefix Length: Enter the Subnet Prefix length.
An IPv6 prefix indicates the portion of the address used for
routing or identifying an address range.
• Gateway: Enter the gateway address.
• Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
• Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.