Owner's Manual

Installation

To register the IP device manually

1. Click the [MANUAL] button.

2. Enter the IP address.

3. Click the check box of desired device.

4. Enter the [User Name] and the [Password] and then click the

[Add] button. When you select several channels, channels are

assigned same ID and password.

5. Confirm the result of authentication on the [Verify] option.

6. Click the check box of confirmed cameras. Selected cameras are

registered channel in order.

7. Click the [CLOSE] button to exit the window.

NOTE

• The Supported IP camera specifications.

Specification Description

Driver LGE, AXIS, ONVIF

Recording mode Continuous, Instant, Motion,

Sensor

Video Codec H.264, MPEG4, MJPEG

Audio recording and

playback

Support

Resolution CIF, Half D1(2CIF), D1(4CIF), UXGA,

720p, 1080p (Up to 2048 x 1536)

Stream LGE (Master-0, Slave-0)

ONVIF (The stream that is

supported from camera)

AXIS (H.264, MPEG4, MJPEG)

PTZ Support

Sensor/Motion input Support

• It takes time to search IP devices and the necessary time

depends on the network environment.

Storage

• Overwrite: Sets whether you use Overwrighting function.

• Full Warning: When the HDD has overflowed a warning message

is displayed.

• Auto Delete: Sets the auto delete date. If you set the auto delete

date, the recorded data will be deleted except the data within

the selected date period of time. The Auto Delete function is

activated every 35 minutes.

• Storage Saving : Saves the storage space by reducing the quality

of the recorded data.

• Format: Initializes the HDD (Hard Disk Drive). All data on the

HDD will be erased.

• E-SATA : Selects the E-SATA device.

• Insert: Uses the selected E-SATA storage for recording data.

• Eject: Uses the selected E-SATA storage for data back-up.