K M Room Air Conditioner OWNER'S MANUAL SPLIT TYPE ROOM AIR CONDITIONER ? Please read carefully and thoroughly this manual operating this unit. Contact the authorized SVC man for repair or before ? maintenance of this unit. ? Contact the installer for installation of this unit. ? The ? appliance is not intended for use infirm persons without supervision. Young children should be supervised not play with the appliance.
CONTENTS SAFETY PRECAUTIONS...............................................................................3 Installation precautions................................................................................3 Operation precautions .................................................................................4 PRODUCT COMPONENT IDENTIFICATION ...............................................7 (1) (2) (3) (4) Feature ....................................................................................
SAFETY PRECAUTIONS To prevent injury to the user or other people Incorrect the operation due to ignoring following indications. Warning Caution and the properties damage, of instruction will cause harm or following instructions must be followed. damage, the seriousness is classified by : This indication shows the possibility of causing death or serious : This indication shows the possibility of causing injury or damage injury. to properties only.
WARNING ? Otherwise, it will shock or It will or cause due to heat ? electrical ? fire due to heat generation ? cause This could It will electrical shock cause due to heat or fire ? It will cause electrical shock or fire. generation. electrical shock. electrical shock or fire ? It may cause electrical shock. ? generation. damage your health.
CAUTION ? ? It may cause an injury. Since the fan rotates at during operation, injury. high speed it may ? Water may enter the unit and degrade the insulation. It may cause an electric shock. ? ? This could ? injure the pet or plant. An oxygen Do not cause an electric shock. occur. this air conditioner to preserve It may It may use may precision devices, food, animal, plants and art objects. cause an quality, ? shortage ? It may cause a fire of the cabinet.
For installation CAUTION When the unit is not going to be used for a long time, turn off the breaker. ? It may cause an injury. Do not operate for a long time in high humidity, e.g. leaving a door or window open. ? WARNING Consult your dealer for installing the air conditioner. ? In the cooling mode, if it is operated in a room with high humidity (80%r.h. or more) for a long time, water condensed in the air conditioner may drop and may wet and spoil furniture, etc. CAUTION Apply grounding.
PRODUCT COMPONENT IDENTIFICATION (1) Feature Soft Dry Operation Mode(page This mode is designed to dehumidify 13) without overcooling. Auto Operation(page 14) In selecting this mode of operation, the setting temperature, indoor fan speed, and the desired operation mode are automatically set by Fuzzy rule on the basis of sensing the room temperature. During Auto Operation, the vertical louver swings up and down automatically in according to 1/f rhythm.
(2) Indoor Unit, Outdoor Unit Indoor Unit Power Air Intake Vent supply Cord (front panel) Remote Controller Air Outlet Vent Storage (11K, 12K, 14K) Horizontal Airflow Direction Louver Panel Vertical Airflow Direction Louver (The air outlet vent opens when the Opening Air Filters operation starts.) Indoor unit controls and indicators (behind front panel) Forced Operation Button Used for operation when the remote controller cannot be used.
(3) Name and Function-Remote Controller Operation display the Displays Remote Controller operation Start/Stop Transmits the Operation transmitter Signal Button starts when this button is stops when the button is signals to the room Operation air conditioner. ? ? ? ? 1 operation OFF a.m. a.m. p.m. p.m. mode. ON Timer Button starting operation. TIME OFF Timer Button Hr. Used to set the time of 2 Time adjust 5 stopping operation.
(4) Remote Controller Preparation How to store the remote controller (11K, 12K, 14K a wall (All Models) Models) Pull the both ends of front 1 How to mount onto panel slightly to open. 1 Use the screws to secure the holder to the wall. Confirm that the remote Hang 2 the front panel upward and keep the remote controller. (Remove it when reach of unit. signals can signal receptor To attach the remote controller to the holder. using.) Press the left and the the front panel.
AIR CONDITIONER OPERATION (1) Operation Mode Cooling Mode Cooling Mode Soft Mode Soft Mode Dry Dry Auto Mode Auto Mode (Cooling Model) Heating Mode (Heat Pump Model) (2) Operation Procedure 1st Button Start/Stop ON 2nd Operation TIME OFF a.m. a.m. p.m. p.m. TIME Hr.
Cooling Operation LED ( 1 Mode lamp ON) Press the Button. Start/Stop Beep, beeps will sound operation lamp will light up. Two short ? 2 Select Beep and the Cooling Operation. Press the Operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
Soft Dry Operation Mode This mode dehumidifies without LED ( 1 overcooling. lamp ON) Press the Button. Start/Stop Beep, ? 2 Select Soft Press the Beep beeps will sound operation lamp will light up. Two short and the Dry Operation. operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
Auto LED ( 1 Operation Mode lamp ON) Press the Start/Stop Button. Beep, ? 2 Select Auto Press the Beep beeps will sound operation lamp will light up. Two short and the Operation. Operation Mode Selection Button. Each time the button is pressed, operation mode is shifed in the arrow direction. Operation Display Cooling Operation Soft Dry Operation Auto Operation Heating Operation (Heat 3 Set the temperature.
Mode Heating Operation ( 1 LED (Heat pump model only) lamp ON) Press the Button. Start/Stop Beep Beep, ? 2 Select beeps will sound operation lamp will light up. Two short and the Heating Operation. Press the Operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction. Operation Display Cooling Operation Soft Dry Operation Auto Operation Heating Operation (Heat 3 pump model only) Set the temperature.
FAN ( 1 Operation LED lamp ON) Press the Start/Stop Button. Beep, ? 2 3 Press FAN Operation Button. Each time Indoor Fan Speed arrow Selector is pressed, the fan Beep beeps will sound operation lamp will light up. Two short speed and the mode is shifted in the direction. ? Fan speed is low. ? Fan speed is medium. ? Fan speed is ? Auto Air : Fan high.
(3) Sleep Mode Auto ( LED - Control Setting lamp ON) Remote Controller ? Sleep Mode will be operated at a low fan speed(Cooling) or a med. fan speed(Heating) for quiet sleeping. The Press the Sleep Mode Auto Button. Hr. p.m. Beep, ON Beep OFF 1. Press the Sleep Mode Auto Button and set the time to turn off. SET 2. Check the CANCEL room Sleep Mode Auto LED of the air conditioner 3. The Timer is pressing the lights up.
(4) Airflow Direction Procedure Vertical Airflow Direction Control Airflow Direction Control The airflow direction the 1Press (Confirm Start/Stop the unit on be adjusted as desired by using the remote yourself directly, such as after taking a bath. can when you want to cool Button. controller. This is effective Caution operation.) ? Always use the remote controller to airflow direction.
Horizontal Airflow Direction Control Adjust the by hand. ? horizontal airflow direction by manually moving the horizontal airflow direction louver (5) Setting the Present Time The present time can be set the remote controller. 1 Press the Start/Stop the RESET Button only when Button after changing or pressing pressing batteries the reset button 2 or when Press the Time being replacing Setting batteries for Button until set the desired time. for Remote Controller.
(6) Timer Setting LED ( lamp ON) Remote Controller 1 ON Timer Button or ON TIME OFF a.m. a.m. p.m. p.m. TIME Hr. OFF Timer Heat pump model Button Cooling 2 Time 3 Timer SET Button Setting model Button ON OFF SET CANCEL 1 2 34 4 Timer CANCEL Button RESET 1 Press the ON Timer Button or OFF Timer To cancel the settings. Button. Press the Timer Cancel button.
Timer Setting Procedure 1 Confirm the present 2 Press ON Timer Button time.(Refer or to page 19) OFF Timer Button. ? Select one of the following four types of operation. ON OFF OFF TIME Operation stops a.m. Delay at OFF Timer Setting. OFF Timer Delay ON ON Timer p.m. Delay OFF ON and ON Timer Delay ON and OFF Timer Operation TIME starts at ON Timer Setting. a.m. TIME OFF a.m. a.m. p.m. p.m. ON TIME OFF a.m. a.m. p.m. p.m.
? Soft When the Dry Operation Mode temperature is higher than the setting temperature, it operates cooling mode as the setting temperature, the setting fan speed (if AUTO mode, then med.), and then it will be switched to Soft Dry Operation Mode when the room temperature reaches the setting temperature. In Soft room Dry Operation Mode, the indoor fan speed is automatically switched to the low. ROOM TEMP. SET TEMP. +1°C COOLING ROOM TEMP. SOFT DRY SET TEMP. -0.
FORCED OPERATION Operation procedures when the remote controller can't be used. Open the front panel upward Operation Button. and press the Forced If you want to stop operation, press again. During Forced operation, the operating conditions are automatically set as the following: Heat pump Model Cooling Operating FAN mode Speed Setting Temp. Model Room Temp. ≥ 24°C 24°C > Room Soft Cooling Cooling High High Soft 22°C 22°C Air Intake Temp. ≥ 21°C Room Dry Temp.
CARE AND MAINTENANCE Disconnect the power plug or turn off Remove the Air filters. Take hold of the tab and the breaker. to remove pull slightly forward the filter. When the air filter is to be removed, do not touch the metal parts of the indoor unit. When the unit is to be cleaned, switch off plug or turn off and disconnect the power the breaker. Since the fan rotates at operation, Clean it may using cause soft high speed during an injury. dry cloth. It may cause an injury.
WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME. When it is not going to be used for a long time. 1 When the air conditioner is to be used Operate the air conditioner at the following settings for 2 to 3 hours. Type of operation: Fan operation mode.(refer to page 16) again. Clean the air filter and install it in the 1 indoor unit. (Refer to page 24 for cleaning it.) ? Clean it before installing. This will 2 dry out the internal mechanisms.
OPERATION TIPS Do not overcool the room. Keep blinds or curtains Keep the closed. This is not good for the health and wastes electricity. room temperature uniform. Do not let direct sunshine Adjust enter the room when the air horizontal airflow direction conditioner is in to ensure a uniform operation. the vertical and temperature in the room.
BEFORE CALLING FOR SERVICE Check the following points before requesting repairs service.... If the malfunction or persist, please contact your dealer. Does not The operate. room peculiar ? Have you made mistake in timer a ? Has the fuse blown or or heat dirty? cleaning ? room may have been very hot when the room air conditioner Has the or This is the ? the air conditioner cools the warm room air. display display noise that sounds freon For a ? flowing.
P/NO.
