Owner's Manual

24 Room Air Conditioner
AUTO CLEAN
Operating
Instructions
During
Auto Clean
function,
moistures left in indoor units after
Cooling
Operation
or
Healthy
Dehumidification
Operation
can be removed.
During
Auto Clean
function,
only Start/Stop
button,
Plasma button and Auto Clean button are available.
NOTICE
Auto clean
(Optional)
1. Whenever
you press
the Auto Clean
button,
Auto Clean Function will be
reserved and cancelled.
2. Auto Clean function works before and after
cooling
or dehumidification mode.
For
details,
refer to the below
points.
3. When the unit is started after the reservation of Auto Clean
,the
Cool Start
function
operates
and indoor Fan is started after 20 seconds.
4. When
you press Start/Stop
button to turn off the unit after the
you
have reserved
Auto Clean
function,
the air-conditioner circulates the indoor air in the Auto
Clean mode with no more
Cooling
or Dehumidification
operation.
For
Cooling
only
model,
it lasts for 30 minutes for Heat
pump
model,
for 16 minutes.
5. If
you press
the auto clean button
again during
the
product operation
,
Auto
Clean function will be cancelled.
Display Luminosity (Optional)
?
The
Display Luminosity
can be
adjusted
by
using
the remote control.
Press the
start/stop
button to start the unit.
Open
the door on the remote
control,
press
the 2ndF button
and,
press display luminosity
button.
Display
will be dark. Press the button
again
to set
bright
display.