LG Room Air Conditioner OWNER'S MANUAL Prior to installation, this airconditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-2, EN 61000-3 Norm). ? ? Please read this owner's manual and before air conditioner. installing and carefully operating your room thoroughly Please retain this owner's manual for future reference after reading it thoroughly.
FOR YOUR RECORDS Write the model and serial numbers here: Model # Serial # You can find them on a label on the side of each unit. Dealer's Name Date Purchased Staple your receipt to this page in the event you need purchase or for warranty issues. it to prove date of Safety READ THIS MANUAL Precautions .................3 Prior to Operation Operating ..................6 Instructions...........7 Remote Controller ..............7 Remote Control Operation.8 Additional features............
Precautions Safety Safety To to the prevent injury Precautions user or other people and property damage, the following instructions must be followed. Incorrect classified operation due to ignoring instruction by the following indications. WARNING This symbol CAUTION This symbol Meanings of symbols will indicates the indicates the used in this manual Be sure possibility possibility are as Be harm cause of or The seriousness is damage.
Safety Precautions Operation ? Do not operate pulling out the power It will cause or stop the unit by inserting Do not allow water to or run into electric parts. plug. electric shock or fire due to heat ? It may cause failure of machine or electric shock. generation. Do not operate with wet hands or in Do not direct airflow at damp room occupants only. environment. ? It may cause ? It may cause Do not It may use fire and electric shock accident.
Safety Precautions Operation Never touch the metal removing ? They are parts of the unit when sharp and may cause Ventilate well when used injury. ? together with An oxygen Water may enter the unit and may cause an electric shock. When a shortage may ? occur. Do not put a pet or house plant where it will be cause Do not exposed to direct air flow. are as the insulation. It turned off.
Prior to operation Prior to for Preparing 1. Contact 2. 3. Use installation an in the power Plug operation operation specialist for installation. plug properly. dedicated circuit. a 4. Do not use an 5. Do not start/stop operation by plugging/unplugging 6. If the extension cord. cord/plug is damaged, replace it with only an the power cord. authorized replacement part. Usage 1. Being exposed to direct airflow for an Do not expose occupants, pets, plants 2.
Operating Instructions Instructions Operating Remote Controller Remove the the arrow Insert of new battery battery batteries are Reattach the NOTICE Do not by pulling it to according making sure correctly. that the and (+) ENGLISH (-) installed cover by sliding it back into position. Use 2 AAA(1.5volt) batteries. rechargeable batteries. : use Storage ? cover direction.
Operating Instructions Remote Control The remote control transmits the Operation signals Signal to the system. transmitter 1. START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. 2. OPERATION MODE SELECTION BUTTON Used to select the operation mode. 3. ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 4. INDOOR FAN SPEED SELECTOR Used to select fan speed in four steps low, medium, high and CHAOS. 5.
Operating Instructions Cooling Operation 1 Press the a 2 beep. Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the on lower than the room a Healthy Dehumidification Close the door set within arrow. Auto Cooling 3 ENGLISH Start/Stop button. respond with The unit will Heating (Heat pump model only) the remote control.
Operating Instructions Auto Operation(Optional) 1 Press the a 2 Start/Stop button. respond with The unit will beep. Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Cooling 3 ON The arrow.
Operating Auto Instructions Changeover Operation(Optional) 1 Press the a 2 beep. Open the door on the remote control. To select Auto Changeover Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Auto Cooling 3 ENGLISH Start/Stop button.
Operating Instructions Healthy Dehumidification 1 Press the Start/Stop button. respond with The unit will a 2 Operation beep. Open the door the remote control. To select on Dehumidification Operation, press the Healthy Operation Mode Selection button. Each time the button is pressed, shifted in the direction of the Auto Cooling 3 Set the fan operation Healthy Dehumidification speed again mode is Heating (Heat pump model only) with the door of the remote control still closed.
Operating Heating Operation(Heat pump 1 Press the ENGLISH Start/Stop button. respond with beep. Open the door on the remote control. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Close the door arrow. Auto Cooling 3 only) The unit will a 2 model Instructions Healthy Dehumidification on Heating (Heat pump model only) the remote control.
Operating Instructions Jet Cool Operation 1 Press the a 2 beep. Press the Jet Cool button to the will on 3 Start/Stop button. respond with The unit will speed cooling operate mode and the unit operate in super high fan speed cooling mode for 30 minutes. To cancel the Jet Cool mode, press the Jet Cool button or room temperature setting button again and the unit will operate in high fan speed on cooling the fan speed button or the mode.
Operating PLASMA Purification 1 Instructions Operation(Optional) Press the ENGLISH Start/Stop button. respond with a The unit will beep. 2 3 Open the door on the remote control. Press the PLASMA air purifying operation ON/OFF button. Operation will start when the button is pressed and stop when the button is pressed again. Set the fan closed. You speed again with door of the remote control speed in four steps-low, medium, high or CHAOS.
Operating Instructions 2nd F Operation 1 Press the a 2 Start/Stop button. respond with The unit will beep. Open the door of the remote control and press the 2nd operate functions printed in blue at bottom Function button to of buttons. (Check the display.
Operating Instructions Additional features Sleep 1. Press the Sleep Mode Mode Auto button to set the time you want the unit to turn off Sleep Mode, press the sleep Mode Auto button several times until the star ( 2. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 mode is available for 1 to 7 times. To sleep alter the time period in steps of Mode Button while Sleep 3. Make the sure Sleep 1 aiming hour, press the at air conditioner.
Instructions Operating Vertical Airflow Direction Control The up/down airflow (Vertical Airflow) adjusted by using the remote control. can be NOTICE If you press the CHAOS swing button, the horizontal airflow direction is changed automatically based on the CHAOS algorithm and at the comfortable, Always up/down as button to start the unit. Start/Stop if enjoying a Swing button and the louvers will up and down.
Instructions Operating Air Circulation Mode Circulates the 1. Press the 2. Open air without room Start/Stop the door on cooling or heating. button. the unit will respond with a the remote control. Press the Air Circulation button. Close the door remote control. Now each time that you press the Indoor Fan shifted from low to CHAOS and back to low again. CHAOS Air Fan speed is on low. ENGLISH beep. Fan speed Speed Selector, is on medium.
Maintenance and Service Maintenance and Service CAUTION: Before performing any maintenance, turn off the main power to the system. Indoor Unit Never Grille, Case, and Remote Control Turn the off before system cleaning. clean, wipe with a soft, dry cloth. Do bleach use ? To Could not ? NOTICE before followings: cause deformation and/or Volatile substances Could Supply power must be disconnected cleaning any of the discoloration. abrasives.
Maintenance and Service Replacement of Purifying Filter(Optional) ? Recomended 1. Open use front period panel : About 2 years and remove air filters. 2. Remove 3. Insert Triple deodorizing new Filters. Triple deodorizing ENGLISH Filters. Air filter 2 3 4. Reinsert air filters and close front panel. Triple Deodorizing Filter Outdoor Unit The heat outdoor unit should be checked exchanger coils and panel vents of the regularly.
Maintenance and Service When the air conditioner is not going to be used for a When air conditioner is not 1. Operate the air conditioner This will ? dry on going long time. to be used for a long time. mode for 2 to 3 hours. out the internal mechanisms. 2. Turn off the circuit breaker, and disconnect the plug. CAUTION Turn off the circuit breaker when the air conditioner is not be used for a long Dirt may collect and may going to time. cause a fire. 3.
Maintenance and Service Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Case The air conditioner does not operate. ? Have you made a mistake in timer operation? Has the fuse blown or has the circuit breaker been The room has a See page Explanation ? peculiar ? odor. tripped? - Check that this is not the 17 a damp walls, carpet, furniture, or smell exuded by cloth items in the - room.
Memo Memo 24 Room Air Conditioner
