Room Air Conditioner OWNER'S MANUAL SPLIT TYPE ROOM AIR CONDITIONER ? Please read carefully and thoroughly this manual operating this unit. Contact the authorized SVC man for repair or before ? maintenance of this unit. ? Contact the installer for installation of this unit. Prior to installation, this air-conditioning unit must be approval by the utility service which provides electricity (EN 60555-3 Norm).
CONTENTS PRODUCT COMPONENT IDENTIFICATION ...............................................3 (1) Features ................................................................................................3 (2) Indoor Unit, Outdoor Unit ......................................................................4 (3) Name and Function-Remote Controller .................................................5 (4) Remote Controller Preparation .............................................................
PRODUCT COMPONENT IDENTIFICATION (1) Feature GASoft Dry Operation Mode(page 9) This mode is designed to dehumidify without overcooling. GBNatural wind by CHAOS logic(page 18) This mode automatically controls the indoor speed and creates the feeling of a pleasant breeze like a natural wind by fan GC CHAOS logic.
(2) Indoor Unit, Outdoor Unit Indoor Unit Air Intake Vent (front panel) Remote Controller Storage Air Outlet vent Air Filter Horizontal Airflow Direction Louver Vertical Airflow Direction Louver (The air starts.) outlet vent opens when the Air Filters operation (behind front panel) Forced Operation Button Used for operation when the remote controller cannot be used.
(3) Name and Function-Remote Controller GAOperation display Remote Controller the Displays Transmits the GBStart/Stop transmitter Signal Operation signals operation to the room conditions. Button starts when this button is stops when the button is pressed, and pressed again. air conditioner. GC Operation Mode Selection Button Used to select the ? ? ? 1 ? operation Cooling Operation Mode. mode. Soft Dry Operation Mode. Auto Operation.
(4) Remote Controller Preparation How to mount onto How to store the remote controller Pull the both ends of front 1 panel slightly 1 to open. Use the screws a wall to secure the holder to the wall. Confirm that the remote Hang 2 the front panel upward and keep 2 the remote controller. (Remove it when reach of unit. signals can signal receptor To attach the remote controller to the holder. using.) Press the left and the right side to close the front panel.
AIR CONDITIONER OPERATION (1) Operation Mode Cooling Mode Cooling Mode Soft Mode Soft Mode Dry Dry Auto Mode Auto Mode (Cooling Model) Heating Mode (Heat Pump Model) (2) Operation Procedure 1st Button Start/Stop ON 2nd Operation 2 Button Heat pump model Cooling Room 4th Indoor Fan Temperature Setting model 3 4 Button Speed OFF a.m. p.m. p.m. TIME Hr. 1 Mode Selection 3rd TIME a.m.
GA Cooling Operation LED ( 1 Mode lamp ON) Press the Start/Stop Button. Beep, beeps will sound operation lamp will light up. Two short ? 2 Select Beep and the Cooling Operation. Press the Operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
GB Soft Dry Operation Mode This mode dehumidifies without LED ( 1 overcooling. lamp ON) Press the Start/Stop Button. Beep, ? 2 Select Soft Press the Beep beeps will sound operation lamp will light up. Two short and the Dry Operation. operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
GC Air Circulation Mode This mode is used to circulate ( 1 LED room air without cooling or heating. lamp ON) Press the Start/Stop Button. Beep, ? 2 3 Beep beeps will sound operation lamp will light up. Two short and the Press Air Circulation Button. Each time Indoor Fan arrow Speed Selector is pressed, the fan speed mode is shifted in the direction. ? Fan speed is low. ? Fan speed is medium. ? Fan speed is ? Natural Wind high.
GD Heating Operation ( 1 LED Mode (Heat pump model only) lamp ON) Press the Start/Stop Button. Beep Beep, ? 2 Select beeps will sound operation lamp will light up. Two short and the Heating Operation. Press the Operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction. Operation Display Cooling Operation Soft Auto Dry Operation Operation Heating Operation (Heat pump 3 model only) Set the temperature.
GE Auto LED ( 1 Operation Mode lamp ON) Press the Start/Stop Button. Beep, ? 2 Select Auto Press the Beep beeps will sound operation lamp will light up. Two short and the Operation. Operation Mode Selection Button. Each time the button is pressed, operation mode is shifed in the arrow direction. Operation Display Cooling Operation Soft Dry Operation Auto Heating Operation Operation (Heat 3 Set the temperature.
(3) Sleep Mode Auto ( LED - Control Setting lamp ON) Remote Controller ? Sleep Mode will be operated at a low fan speed(Cooling) or a med. fan speed(Heating) for quiet sleeping. The Press the Sleep Mode Auto Button. Hr. p.m. Beep, ON OFF SET CANCEL 1. Press the Sleep Beep Mode Auto Button and set the time to turn off. 2. Check the room Sleep 3. The Timer is RESET Mode Auto LED of the air conditioner pressing the lights up.
(4) Airflow Direction Procedure GA Vertical Airflow Direction Control Airflow Direction Control The airflow direction the 1Press (Confirm Start/Stop the unit on be adjusted as desired by using the remote yourself directly, such as after taking a bath. can when you want to cool controller. This is effective Caution Button. operation.) ? Always use the remote controller to airflow direction.
GBHorizontal Airflow Direction Control Adjust the by hand. ? horizontal airflow direction by manually moving the horizontal airflow direction louver (5) Setting the Present Time The present time can be set the remote controller. 1 Press the Start/Stop the RESET Button only when Button after or changing pressing pressing batteries the reset button 2 being Press the Time SET Button. SET NOTE : Check a.m. and p.m.
(6) Timer Setting LED ( lamp ON) Remote Controller ON 1 ON Timer Button or OFF Timer OFF a.m. p.m. p.m. TIME Hr. Heating Button Cooling 2 Time 3 Timer SET Button 4 Timer CANCEL Button Setting TIME a.m. 1 Button ON OFF SET CANCEL 2 34 RESET 1 Press the ON Timer Button or OFF Timer To cancel the settings Button. Press the Timer Cancel button.
Timer Setting Procedure 1 Confirm the present 2 Press ON Timer Button ON time.(Refer or to page 15) OFF Timer Button. ? Select one of the following four types of operation. OFF OFF TIME Operation stops a.m. Delay at OFF Timer Setting. OFF Timer Delay ON Timer Delay OFF ON Operation TIME a.m. ON TIME OFF a.m. a.m. p.m. p.m. Operation stops at OFF at ON Timer Setting. TIME and ON Timer Delay ON and OFF Timer starts at ON Timer Setting. p.m. ON TIME OFF a.m.
(7) Operation Details ? Soft Mode Dry Operation When the room temperature is higher than the setting temperature, it operates cooling mode as the setting temperature, the setting fan speed (if CHAOS mode, then med.), and then it will be switched Soft Dry Operation Mode when the room temperature reaches the setting temperature. In Soft Dry Operation Mode, the indoor fan speed is automatically switched to the low. COOLING ROOM ROOM TEMP. TEMP +1°C SOFT DRY SET TEMP -0.
FORCED OPERATION Operation procedures when the remote controller can't be used. Open the front panel upward Operation Button. and press the Forced If you want to stop operation, press again. During Forced operation, the operating conditions are automatically set as the following: Heat pump Model Cooling Operating FAN mode Speed Setting Temp.
CARE AND MAINTENANCE Before performing any maintenance procedure Remove power off. plug or During season of the air filters. Cleaning turn the main switch the Recommended about once every two weeks. 1 Remove the Air filters. Take hold of the tab and forward to remove pull slightly the filter. main switch Don't wash with water. 2 There's the danger Clean. ? of To remove the dust adhered to the filters, either use a vacuum cleaner, or wash them in water and electrical shock.
At the end of the 1 Operate the air conditioner following settings for 2 to 3 ? Type of operation (refer to page 10) This will dry : At the start of the season at the 1 hours. Remove a protective season cover from the outdoor unit. Air circulation mode. out the internal mechanisms. 2 Remove the batteries from the Remote Controller. 2 Clean the air filters, re-insert them, and operate the air conditioner. 3 outlet and intake vents.
OPERATION TIPS Do not overcool the This is not room. good for the electricity. Keep blinds or curtains Keep the closed. uniform. room temperature health and wastes Do not let direct sunshine Adjust enter the room when the air horizontal airflow direction to conditioner is in ensure a operation. in the the vertical and uniform temperature room. 4~6°C Make sure that the doors and windows are shut Avoid doors and Clean the air filter windows to keep room.
CAUTION Do not pull out the power cord. Do not use the air Do not block the air intake conditioner for purposes other than cooling or Damage to the cord may result heating the room. This in serious electrical shock. Do not use the air conditioner for other purposes, such as drying clothes, preserving foods, keeping animals, or Select the most appropriate temperature. and outlet vents. causes lowered performance and irregular operation.
BEFORE CALLING FOR SERVICE Check the before following points requesting repairs or service.... If the malfunction persist, please contact your dealer. Cause Faults Does not operate. Does not cool or ? heat effectively. ? ? Have you made Is the air filter The room The room has a peculiar odor. dirty? was operation is See air filter first turned ? Are the indoor unit's air inlet ? Check that this is not ? For a or a cleaning instructions.
This is not malfunction It may happen some noise the same as indoor unit when the unit operate which is due to the by temperature shrinkage or or "Tig" "Tig" from the after the unit stop, expansion of plastic body fluctuation.
P/NO.
