Use and Care Guide Split System Safety Room Air Conditioner Instructions BE01 Instructions Operating Care and Cleaning Problem Solver Models: Models: Models: Outdoor units Indoor units Outdoor units AG0AC17BKO AG1AC17BKM AG0AC17BWO AG1AC17BWF/G/I AG0AH17BWO AG1AH17BWF/G/I AG0AC23BKO AG1AC23BKM AG0AC23BWO AG1AC23BWF/G/I AG0AH23BWO AG1AH23BWF/G/I 50Hz, 220-240Volts 50Hz, 220-240Volts 60Hz, 220Volts ? Please read this manual before ? operating Outdoor units Indoor units carefully
CONTENTS SAFETY PRECAUTIONS...............................................................................3 Installation precautions................................................................................3 Operation precautions .................................................................................4 PRODUCT COMPONENT IDENTIFICATION ...............................................7 (1) (2) (3) (4) Feature ....................................................................................
SAFETY PRECAUTIONS To prevent injury to the other user or Incorrect the operation due to ignoring following indications. WARNING CAUTION The items to be followed people and the properties damage, of instruction will cause harm or following instructions must be followed. damage, the seriousness is classified by : This indication shows the possibility of causing death or serious : This indication shows the possibility of causing injury or damage injury. to properties only.
WARNING ? Otherwise, it will shock or It will or cause due to heat ? electrical ? fire due to heat generation ? cause This could It will electrical shock cause due to heat or fire ? It will cause electrical shock or fire. generation. electrical shock. electrical shock or fire ? It may cause electrical shock. ? generation. damage your health.
CAUTION ? ? It may cause an injury. Since the fan rotates at during operation, injury. high speed it may ? Water may enter the unit and degrade the insulation. It may cause an electric shock. ? ? This could ? injure the pet or plant. An oxygen Do not cause an electric shock. occur. this air conditioner to preserve It may It may use may precision devices, food, animal, plants and art objects. cause an quality, ? shortage ? It may cause a fire of the cabinet.
For installation CAUTION When the unit is not going to be used for a long time, turn off the breaker. WARNING Do not operate for a long time in high humidity, e.g. leaving a door or window open. Consult your dealer for installing the air conditioner. ? ? It may cause an injury. ? In the cooling mode, if it is operated in a room with high humidity (80%r.h. or more) for a long time, water condensed in the air conditioner may drop and may wet and spoil furniture, etc. CAUTION Apply grounding.
PRODUCT COMPONENT IDENTIFICATION (1) Feature GASoft Dry Operation Mode(page This mode is designed to dehumidify 13) without overcooling. GBAuto Operation(page 14) In selecting this mode of operation, the setting temperature, indoor fan speed, and the desired operation mode are automatically set by Fuzzy rule on the basis of sensing the room temperature. During Auto Operation, the vertical louver swings up and down automatically in according to 1/f rhythm.
Indoor Unit Air Intake Vent (front panel) Remote Controller Storage Air Outlet Vent Horizontal Airflow Direction Louver Vertical Airflow Direction Louver (The air outlet vent operation starts.) opens when the Indoor unit controls and indicators the front panel Pull the both ends of front panel and hang upward like below Open picture. Air Filters (behind front panel) Force Operation Button Use for operation when the remote controller cannot be used.
(3) Name and Function-Remote Controller Remote Controller GAOperation display the Displays transmitter Signal Transmits the signals operation GBStart/Stop Operation to the room conditions. Button starts when this button is stops when the button is air conditioner. GC Operation ? ? 1 AUTO ON TIME ? OFF a.m. a.m. p.m. p.m. and pressed again. Mode Selection Button Used to select the ? pressed, operation Cooling Operation Mode. mode. Soft Dry Operation Mode.
(4) Remote Controller Preparation How to store the remote controller Pull the both ends of front 1 panel slightly to open. How to mount onto 1 Use the screws a wall to secure the holder to the wall. Confirm that the remote Hang 2 the front panel upward and keep the remote controller. (Remove it when reach of unit. signals can signal receptor To attach the remote controller to the holder. using.) Press the left and the right side to close the front panel.
AIR CONDITIONER OPERATION (1) Operation Mode Cooling Mode Cooling Mode Soft Mode Soft Mode Dry Dry Auto Mode Auto Mode (Cooling Model) Heating Mode (Heat Pump Model) (2) Operation Procedure 1st Button Start/Stop AUTO ON 2nd Operation TIME OFF a.m. a.m. p.m. p.m. TIME Hr.
GA Cooling Operation ( 1 LED Mode lamp ON) Press the Start/Stop Button. Beep, beeps will sound operation lamp will light up. Two short ? 2 Select Beep and the Cooling Operation. Press the Operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
GB Soft Dry Operation Mode This mode dehumidifies without LED ( 1 overcooling. lamp ON) Press the Start/Stop Button. Beep, ? 2 Select Soft Press the Beep beeps will sound operation lamp will light up. Two short and the Dry Operation. operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
GC Auto LED ( 1 Operation Mode lamp ON) Press the Button. Start/Stop Beep, ? 2 Select Auto Press the Beep beeps will sound operation lamp will light up. Two short and the Operation. Operation Mode Selection Button. Each time the button is pressed, operation mode is shifed in the arrow direction. Operation Display Cooling Operation 3 Set the temperature.
GD Mode Heating Operation ( 1 LED (Heat pump model only) lamp ON) Press the Start/Stop Button. Beep Beep, ? 2 Select beeps will sound operation lamp will light up. Two short and the Heating Operation. Press the Operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction. Operation Display Cooling Operation 3 Soft Dry Operation Auto Operation Heating Operation (Heat pump model only) Set the temperature.
GE FAN Operation Mode This mode is used to circulate ( 1 LED room air without cooling or heating. lamp ON) Press the Start/Stop Button. Beep, beeps will sound operation lamp will light up. Two short ? 2 3 Press FAN Operation Button. Each time Indoor Fan Speed arrow Selector is pressed, the fan speed and the mode is shifted in the direction. AUTO ? Fan speed is low. ? Fan speed is medium. ? Fan speed is ? Auto Air: Fan high.
(3) Sleep Mode Auto ( LED - Control Setting lamp ON) Remote Controller ? Sleep Mode will be operated at a low fan speed(Cooling) or a med. fan speed(Heating) for quiet sleeping. The Press the Sleep Mode Auto Button. Hr. p.m. Beep, ON OFF 1. Press the SET Beep Sleep Mode Auto Button and set the time to turn off. CANCEL 2. Check the room Sleep 3. The Timer is pressing RESET Mode Auto LED of the air conditioner the lights up.
(4) Airflow Direction Procedure GA Vertical Airflow Direction Control Airflow Direction Control The airflow direction the 1Press (Confirm Start/Stop the unit on be adjusted as desired by using the remote yourself directly, such as after taking a bath. can when you want to cool controller. This is effective Caution Button. operation.) ? Always use the remote controller to airflow direction.
GB Horizontal Airflow Direction Control ? Adjust the by hand. horizontal airflow direction by manually moving the horizontal airflow direction louver (5) Setting the Present Time The present time can be set the remote controller. 1 Press the Start/Stop the RESET Button only when Button after or changing pressing pressing batteries the reset button 2 or when Press the Time being replacing Setting batteries for Button until set the desired time. for Remote Controller.
(6) Timer Setting LED ( lamp ON) AUTO Remote Controller ON Timer Button 1 or ON OFF TIME a.m. a.m. p.m. p.m. TIME Hr. OFF Timer Heating Button Cooling 2 Time 3 Timer SET Button 4 Timer CANCEL Button Setting Button ON OFF SET CANCEL 1 2 34 RESET 1 Press the ON Timer Button or OFF Timer To cancel the settings Button. Press the Timer Cancel button.
Timer Setting Procedure 1 Confirm the present 2 Press ON Timer Button time.(Refer or to page 19) OFF Timer Button. ? Select one of the following four types of operation. ON OFF OFF Delay TIME Operation stops a.m. at OFF Timer Setting. OFF Timer Delay ON Timer Delay OFF and ON Timer Delay ON and OFF Timer ON Operation TIME starts at ON Timer Setting. a.m. ON TIME ON OFF Operation stops at OFF at ON Timer Setting. TIME a.m. a.m. TIME a.m.
? Soft When the Dry Operation Mode temperature is higher than the setting temperature, it operates cooling mode as the setting temperature, the setting fan speed (if AUTO mode, then med.), and then it will be switched to Soft Dry Operation Mode when the room temperature reaches the setting temperature. In Soft room Dry Operation Mode, the indoor fan speed is automatically switched to the low. ROOM TEMP. COOLING ROOM TEMP. SET TEMP. +1°C SOFT DRY SET TEMP. -0.
FORCED OPERATION Operation procedures when the remote controller can't be used. Open the front panel upward Operation Button. and press the Forced If you want to stop operation, press again. Forced operation, the operating conditions automatically During are set as follows: Heat pump Model Cooling Operating FAN mode Model Room Temp. ≥ 24°C 21°C ≤ Room Soft Cooling Cooling High High Soft 22°C 22°C Air Intake Speed Setting Temp. Temp. < 24°C Room Dry Temp.
CARE AND MAINTENANCE Disconnect the power plug or turn off Remove the air filters. Take hold of the tab and the breaker. to remove pull slightly forward the filter. When the air filter is to be removed, do not touch the metal parts of the indoor unit. When the unit is to be cleaned, switch off plug or turn off and disconnect the power the breaker. Since the fan rotates at operation, it may cause high speed during an injury. It may cause an injury.
WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME. When it is not going to be used for a long time. 1 When the air conditioner is to be used Operate the air conditioner at the following settings for 2 to 3 hours. Type of operation: Fan operation mode.(refer to page 16) 1 again. Clean the air filter and install it in the indoor unit. (Refer to page 24 for cleaning it.) ? Clean it before installing. ? This will 2 dry out the internal mechanisms.
OPERATION TIPS Do not overcool the room. Keep blinds or curtains Keep the closed. This is not temperature uniform. Do not let direct sunshine Adjust health and wastes enter the room when the air horizontal airflow direction electricity. conditioner is in to ensure a uniform good for the room operation. the vertical and temperature in the room.
BEFORE CALLING FOR SERVICE Check the following points before requesting repairs service.... If the malfunction or persist, please contact your dealer. Does not The operate.
General Electric Company, Appliance Park, Louisville, KY, Models: Models: 40225 USA Models: Outdoor units Indoor units Outdoor units AG0AC17BKO AG1AC17BKM AG0AC17BWO AG1AC17BWF/G/I AG0AH17BWO AG1AH17BWF/G/I AG0AC23BKO AG1AC23BKM AG0AC23BWO AG1AC23BWF/G/I AG0AH23BWO AG1AH23BWF/G/I 50Hz, 220-240Volts 50Hz, 220-240Volts 60Hz, 220Volts 49-7323 11-94 CG Indoor units Outdoor units Indoor units Printed in Korea P/NO.
