ENGLISH Room Air Conditioner OWNER'S MANUAL BE01 Prior to installation, this air-conditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-3 Norm). êìëëäàâ üáõä • Please read carefully and thoroughly this manual before operating this unit. • Contact the authorized SVC man for repair or maintenance of this unit. • Contact the installer for installation of this unit.
Safety Precautions Safety precautions Safety Precautions Warning ................................2 Caution .................................3 Operating Instructions Preparation before operation ..4 Remote Control Features .....5 Operation Mode Selection ......6 Operating Instructions Additional features..............13 Care and Maintenance To prevent injury and property damage, follow these instructions.
• It may cause explosion, fire and, burn. Do not disassemble or modify products randomly. • It may cause failure and electric shock. CAUTION CAUTION • They are sharp and may cause injury. When cleaning the unit, first make sure the power and breaker are turned off. • Since the fan rotates at high speed during operation, it may cause injury. • Water may enter the unit and degrade the insulation. It may cause an electric shock. Do not put a pet or house plant where it will be exposed to direct air flow.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips 4 Preparation before operation How to Insert the Batteries Remove the battery cover by pulling it according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. Reattach the cover by sliding it back into position. NOTES: • Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries.
The remote control transmits the signals to the system.
Cooling Operation Troubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions How to use the Operation Mode Selection button 6 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling 3 Healthy Dehumidification Heating (Heat pump model only) The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Healthy Dehumidification Operation 8 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling ON Healthy Dehumidification Heating (Heat pump model only) Close the door on the remote control. Set the temperature higher than the room temperature. The temperature can be set within a range of 16°C~30°C in 1°C increments.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Jet Cool Operation 10 1 Press the Start/Stop button. The unit will respond with a beep. 2 Press the Jet Cool button to operate the speed cooling mode and the unit will operate in super high fan speed on cooling mode for 30 minutes. 3 To cancel the Jet Cool mode, press the Jet Cool button or the fan speed button or the room temperature setting button again and the unit will operate in high fan speed on cooling mode.
Open the door on the remote control. Press the PLASMA air purifying operation ON/OFF button. Operation will start when the button is pressed and stop when the button is pressed again. 3 Set the fan speed again with door of the remote control closed. You can select the fan speed in four steps-low, medium, high or CHAOS. Each time the button is pressed, the fan speed mode is shifted. ✴ Air purifying operation (PLASMA) can be with cooling, Heating or any other operations.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions 2nd F Operation 12 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door of the remote control and press the 2nd Function button to operate functions printed in blue at bottom of buttons. (Check the indication of 2nd function on remote control display.
Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically. 2 The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner. 3 To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star ( ) disappears from the operation display.
Safety Precautions Vertical Airflow Direction Control Operating Instructions The up/down airflow (Vertical Airflow) can be adjusted by using the remote control. • Press the Start/Stop button to start the unit. • Open the door on the remote control. Press Chaos Swing button and the louvers will swing up and down. Press the Chaos Swing button again to set the vertical louver at the desired airflow direction.
Operation procedures when the remote control can't be used. The operation will be started if the power button is pressed. If you want to stop operation, re-press the button. Open the front panel upward Cooling Model Operating mode Indoor FAN Speed Setting Temperature Cooling High 22°C Room Temp. ≥ 24°C Heat pump Model 21°C ≤ Room Temp. < 24°C Room Temp.
Safety Precautions Telephone Control Operation(Optional) Calling from outside, you can start the air conditioner to keep the room comfortable. Even though you went out with the air conditioner on, you can turn it off using the phone outside. 1 Dial the number which is connected with the air conditioner. TURN ON After ringing 5 times. Troubleshooting Tips Care and Maintenance Operating Instructions You can hear the "Beep" sound (if the air conditioner is off), then press "0" "0" "7" "8" accordingly.
Grille, Case, and Remote Control ❏ Turn the system off before cleaning. To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives. Pow d er G a s o li n e Air filters (behind front panel) Vertical louver Horizontal louver Air inlet vent Air outlet vent AIR FILTERS The air filters behind the front grille should be checked and cleaned once in every 2 weeks or more often if neccessary. 1 Lift the front access panel and pull the filter tab slightly forward to remove the filter.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips 18 Replacement of Purifying Filter(Option) • Recomended use period : About 2 years 1 Open front panel and remove air 2 Remove air purifying filters. filters. 3 Insert new air purifying filters. 2 Air filter 3 4 Reinsert air filters and close front panel. Air purifying filter Outdoor Unit The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
When the air conditioner is to be used again. Operate the air conditioner on Air circulation mode (Refer to page 14) for 2 to 3 hours. Clean the air filter and install it in the indoor unit. (Refer to page 17 for cleaning filters.) Turn off the circuit breaker, and disconnect the plug. Check that the air inlet and outlet of the indoor/outdoor unit are not blocked. CAUTION CAUTION Turn off the circuit breaker when the air conditioner is not going to be used for a long time.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips 20 Before you call for service... ? Troubleshooting Tips! Save time and money! Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Case Explanation See page The air conditioner does not operate.
P/No.: 3828A20243V Printed in Korea After reading this manual, keep it in a place easily accessible to the user for future reference.
