Owner's Manual

11
OSD MENU - Setting
12
OSD MENU - LENS
POWER
VIDEO
OUT
DC ELC VIDEO
DC 12V
+
UP BUTTON
DOWN BUTTON
LEFT BUTTON
RIGHT BUTTON
SETUP
SETUP
LENS
SHUTTER
BLC
AGC
WHITE BAL.
FUNCTION
ADJUST
EXIT
DC
FIXED
OFF
ON
AWB
1
2 3
4
Settings can be made using the 5 buttons
located on the back of the camera.
1. Please press the SETUP button.
- Settings can now be made.
The SETUP menu is displayed on the monitor.
2. Please select any function you wish to activate
by using the UP and DOWN buttons.
3. Please press the LEFT or RIGHT button if you
wish to change mode.
4. Please select 'EXIT' and then press the SETUP
button to finish the setting.
LENS DC
BRIGHTNESS
: RETURN
200
Please select the type of the lens you wish to use by pressing the LEFT or
RIGHT button.
* When using an auto iris lens, the setting of the auto iris lens selection switch, located on the
back of the camera, must be on DC or ELC or VIDEO depending on the type of the lens which is
being used.
• DC/VIDEO : Auto iris lens selection
• MANUAL : Manual lens selection
• DC mode - Brightness setting(0~255 steps)
SETUP
LENS
SHUTTER
BLC
AGC
WHITE BAL.
FUNCTION
ADJUST
EXIT
DC
FIXED
OFF
ON
AWB
* When it is ‘RESET’ , ‘LENS’ comes to be initialized to ‘DC’ .