Brochure

9
ART COOL MINI-SPLIT SINGLE ZONE
ELECTRICAL & REFRIGERATION • QUICK REFERENCE
9
*Minimum Circuit Ampacity
**Maximum Overcurrent Protection
All equipment single phase.
NOTE: Please see local electrical codes for proper
wire specications.
A
B
25' maximum
8' minimum
16.4' maximum
A
B
OIL TRAP
INDOOR UNIT
INDOOR
UNIT
INDOOR
UNIT
COVER
OUTDOOR UNIT
OUTDOOR
UNIT
OUTDOOR
UNIT
INSTALLATION PLATE
INDOOR UNIT TUBING FLARE NUT PIPING
INDOOR UNIT
DRAIN HOSE
HOSE CLAMP
DRAIN PIPE
TYPE ”A“ SCREW
*** Each system is pre-charged with enough refrigerant to charge 25 ft. of line and the
interior unit.
Except for inverter models, Systems having the outdoor unit mounted above the
indoor unit (e.g., basement installations) have the following additional requirement:
For systems with maximum elevation of 25 ft. (see chart above and Figure A),
refrigerant lines must be oil trapped between 8 ft. and 16.4 ft. of elevation.For
systems with elevation of greater than 25 ft. (see chart above), refrigerant lines
must be oil trapped at least every 16.4 ft. of elevation.
Figure A.
Example: 25 ft. maximum elevation.
(Oil traps excluded from inverter
system.)
Please choose a proper wire size based on local and state code
Refrigerant Line Specifications***
Zone
Type Model BTUs Pipe Size Additional Max. Pipe Max.
Liquid Suction Refrigerant Length Elevation
Art Cool
Single-Zone
H/P LA096HNP 9,500 1/4” 1/2” 0.22 oz./ft. 49’ 23’
H/P LA126HNP 11,000 1/4” 1/2” 0.22 oz./ft. 49’ 23’
Electrical Specifications
Zone
Type Model BTUs Voltage Rated MCA* MOP**
Indoor Outdoor Amps
Art Cool
Single-Zone
H/P LA096HNP 9,900 36V DC 115 10.5 14.3 20
H/P LA126HNP 11,500 36V DC 115 10.5 14.3 20