User's Guide Model : LM 40/50, LS 40/50
User's guide .................................................................................................. Important Safety Instructions Selecting a place to work Using the battery pack ...................................................................... ................................................................................. ....................................................................................
4 Using the AC adapter Connecting the AC adapter to an AC outlet (100~240V)..................................... 34 35 Opening and positioning the LCD panel .................................................................................... ............................................................ Power switch ............................................................................................... Turning the power on and off Turning on the computer Turning off the computer ................
When listening to music as MP3 When enjoying DVD Player Attaching an IEEE 1394 device ...................................................................... ............................................................................ ....................................................................... Using the 61 63 63 port....................................................................................... 64 About IrDA port......................................................................
Using Full Recovery Driver re-installation ...................................................................................... ..................................................................................... 89 93 Storage/Memory......................................................................................... 94 Using the optical disk drive Inserting a CD Removing a CD 94 ............................................................................ ....................................
Charging time .............................................................................................106 Battery Life ................................................................................................106 Backup (standby) battery Operating environment .............................................................................106 ............................................................................. 107 Operating ............................................................
User's guide Thank you for using the LG product. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual The following signs call the user. to the carefully before using the computer. attention to features and Follow the instruction closely to operations that may be dangerous to reduce the risk of physical harm or damage equipment. Danger: Not following the instruction will result serious injury. Warning: injury.
Your computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use.
Important Safety Instructions These instructions will enjoyment from the product. Set up your computer on a flat, stable surface. (LG is not responsible for the problems and damages caused by incorrect use of the computer in an unsafe environment.) safety Selecting a place ensure many years of safe to work Warning Do not operate your computer near water; for example, in a bathroom or near a The computer may not function correctly, and there is the risk of electric shock.
Using the battery pack Warning only a battery pack recommended by LG. Using a battery pack of a different type may result Use Keep metallic objects, such in explosion. keys and clips, away from the battery pack. Objects that conduct electricity can short-circuit the battery pack and result and/or injuries. as in fire Keep the battery pack away from heat. There is a risk of explosion or fire. Do not short-circuit There is Do not a battery terminals. risk of explosion.
Replacing and disposing of the backup (standby) battery Warning If the backup battery The lithium or batterry incorrectly replace, there is contains lithium and can is danger of explosion. explode if it is not properly handled disposed of. Replace only with a battery of the same type. ???? ??? ?? ???? ??? ?? ??( ????) ????? ????? ???? ???? ?????? ??? ???? ???? ????? ?????????? ?????? ?? ??? ??????? ( ????) ??? ????? ??? ????? ????? ???? ??? ?? ?????? ?? ???? ?????? ???????? ???? .
to Connecting an AC power source Warning Do not use There is a loose or damaged power risk of electric shock or plugs. fire. properly grounded outlet. Connecting the computer to an outlet without shock and damages to your computer. Use Do not touch or grab the power plug proper grounding with wet hands. There is a Hold the plug body when removing the power cord from a risk of fire and damages to the computer. There is may result in electric risk of electric shock. an outlet.
If object Before or liquid enters the computer or an adaptor, remove power cord, battery, and any other cables from the computer, and contact the customer service for help. There is a risk of an electric shock, fire, or damage to the computer. an cleaning the computer, disconnect the cables from the computer. There is a risk of electric shock Using the or damage power to the cord, battery, and any other computer.
There is If you a risk of fire. smell smoke from the computer or adaptor, turn off the computer, the power cord, and then contact the customer service for help. see remove There is a or risk of fire. The LCD monitor's fluorescent Avoid direct contact with lamp include hydrargyrum. LCD. If it parts of your body, into eyes or the other wash it out several times with clean water.
Upon completion of any service or repairs, ask service technician to perform safety checks. Ignoring safety checks may result in electric shock Use the Wireless LAN at least 5m away from When using the Wireless LAN near a plasma the connection may be unavailable or a or fire. microwave lamp, use plasma lamp. the channel 11, 12, or 13. oven or slow. Keep the computer away from heat. The computer may deform and there is the risk of fire.
Upgrading the computer Warning Before disassembling the computer for upgraing There is the risk of electric shock contact the customer service for or purposes, turn off the power and fire. If you need to open the computer cover, help. and other small parts away from children. Children may choke on a screw or other small part. If Keep screws receive medical a a child swallows a small part, care.
Carrying and storing the computer Caution Before You moving the computer, turn the power off and may trip over the loose cables and fall. When remove all the cables. airplane, follow the instruction by flight attendant. Using the computer on an airplane may result in an airline accident. traveling on an Do not travel with LCD monitor open. Do not expose your computer to the direct sunlight in a closed area such as car.
data loss Preventing (handling hard disk drives) Caution Be cautious when handling the hard disk drive. The hard disk drive is very delicate to any physical impact. Always make backups for your data. LG is not responsible for the data lose caused by users. The data on the hard disk or the drive itself may be damaged in the following situations: Exposure to a physical shock during the disassembling or installing process. 2.
Ergonomic information Warning Adjust the display position The top of the to avoid display should be Keep your head and neck in glare on or your chair to keep Using the computer in the discomfort to your body. arms same Take short periodically a position for a a prolonged period of with your computer. No to reduce muscular discomfort. Check if the volume level is too use the headphones for light. comfortable position.
For Australian Users Warning For safety reasons, only equipment with a telecommunications compliance equipment previously labelled or certified. connect label.
Laser An can compliance statement optical disk drive (device), such be installed in this unit is the surface of the drive as a CD-ROM, CD-RW,DVD-ROM drive, which laser product. The driver's classification label is on as a shown below.
Overview Package The contents following items are included in the package. Match the items on with the items in the box. Some items may look different from the LM40 14.1 inch Notebook PC this list pictures. LM50 15 inch Notebook PC LS40 14.
Note: Make you have the correct AC sure Installation guide adapter before connecting power cord Battery pack Software installation CD it to the computer. / AC adapter Telephone cable Note: - Battery is consumables, so its capacity and lifetime will decrease gradually using time goes by. Battery pack(9 cell) is optional.
Components (LM 40/50) Learning the components and their functions helps more easily and thoroughly. you use the computer Front view LM40 14.
LM50 15 inch Wireless LAN Volume up button (option) LCD Volume down button button Power-saving Power switch mode switch Keyboard TouchPad Built-in TouchPad button IrDA speakers port (option) Note: Pressing the Volume up and down buttons at the -24- same time mutes the sound.
Components (LS40/50) Front view LS40 14.
LS50 15 inch Volume up button Wireless LAN Volume down button (option) LCD Power switch Power-saving mode switch Keyboard TouchPad Built-in TouchPad button speakers Note: Pressing the Volume Rear view up and down buttons at the (LM 40/50, LS same time mutes the sound. 40/50) Note: Some models may look different from the picture below.
Note: To open the display panel 1. Push the latch button to the 2. and lift the LCD 3. panel right 1, 2. Adjust the slope of the display panel for a comfortable viewing angle.
Security keyhole: User can attach security keyhole and connect it to a a separately purchased chain lock into the fixed object to prevent a notebook theft. Note: A position of security keyhole can be different from the model type. Right view IEEE 1394 port Emergency eject hole SD Memory Card /Memory Stick Slot PC Card slot PC Card DVD Drive DVD drive eject button Emergency eject hole: disc tray manually.
Status indicators Note: Some models may look different from the picture below. 8 7 1 2 3456 8 3 2 1 4 5 6 7 1.AC Power: Power indicator lights up when the power cord is connected to the computer.
2.Battery: Battery status indicator indicates the following status of the battery. Green: The computer is connected to an AC adaptor and is being charged. Off: The battery is fully charged OR the computer is not connected to Adapter. Blinking: The battery power is under 10% of its maximum capacity. an AC 3.Power: Power status indicator indicates the Green: The computer is turned Off: The computer is turned off Blinking: The computer 4.Drive in Drive in hard disk following status of the computer.
Basics This section describes how to section before Using The the use the basic features of your computer. using the computer. battery pack battery pack must be fully charged before first use. Note: Battery is consumables, as using time goes so its capacity and lifetime will decrease gradually by. Caution You must turn off the computer before replacing the battery Use only the battery pack that comes with the computer. 1.
2. Place the battery pack in the battery slot, and align the two protrusions battery pack with the two slits on the side of the battery slot. 3. Gently push the battery pack into the slot until it clicks. The battery pack is inserted. You can lock the battery pack in place by pushing the left battery latch in the direction shown above. If you hear a click, the battery pack is locked in. 4. Connect the AC (Refer 5. 6. to adapter and open the LCD panel.
Caution When you are not using the computer, remove the battery pack. Note: The battery pack has the following characteristics. Self-discharge: The battery gradually loses its power over time without ever being used. Periodic full discharge/charge: Frequent recharging of the battery pack can reduce the duration of the battery pack. Periodic performance of full discharge/charge will restore the capacity of the battery pack, in every 30 60 days.
Using the AC adapter adapter or battery pack is needed to supply power to your computer. The AC adapter can be used with a 100~240VAC power source. Use only the AC adapter that comes with your computer. Using any other adaptor may cause damage to your An AC computer. Connecting the AC adapter Connect the power cord to the to an AC outlet (100~240V) adapter, and then plug the other end into an AC outlet.
Opening and the LCD positioning panel Push the latch button in the direction of the arrow1, and open the Adjust the slope of the display panel for comfortable viewing. display panel 1 2 2 Power switch Press the power switch to turn on the computer. Note: The power switch, volume static electricity purposes. up/down buttons -35- are coated for preventing 2.
Turning the power on and off Before turning on the computer, make battery is charged. Turning 1. on the sure the AC adaptor computer Push the latch button to the right1 and open the 1 2 2. is connected Press the power switch. -36- 2 display panel2.
3. 4. Pressing the power switch starts the Windows(R) XP startup If you turn the power screen on 5. In a displayed. the computer for the first time, you have to your copy of Windows XP. The the is self-diagnostic procedures; then registration model, but the difference does process may differ not affect the use register depending on of your computer. moment, 'Welcome to Microsoft Windows' appears on the screen. Click [Next]. 6.
7. ‘What's your computer's name?' appears description for 8. ‘Ready to your computer, and click register ‘Who will users use this and click the screen. Type the name and [Next]. with Microsoft?’ appears this time' and click 9. on on the screen. Select 'No, not at [Next]. computer?’ appears [Next]. -38- on the screen.
10. ‘Thank you!’ registration appears on the screen. process.
Turning off the computer Quit all running applications; click [Start] and choose [Turn Off Computer] from the start up menu. LG In the Turn off computer window, choose Shut down. The computer is turned off until it clicks.
Caution If the Drive in damage indicator is on, do not turn off the computer, the data being read from or written to the drive. use as doing so may Warning If Windows does not shut down correctly, press and hold the power switch for seconds; the system will shut down. Turning off the computer this way may damage the system. It you always turn off the computer by choosing Shut down in the more than 5 If the computer does not shut down correctly while the hard disk drive may be damaged.
Using Windows XP Windows XP is new, brilliant and easy-to-use. rearranged concisely, and it became easier to the start when menu. Also, it allows the users with Background and title bar have been access the application programs from more diverse options to choose from decorating their desktop. Overview Windows XP is computer. Learning the basics features in Windows is recommended to utilize a computer effectively.
Help and Support Click [Help and Support] to learn how encounter while using the computer. Click to troubleshoot problems you may [Start]->[Help and Support]. LG The following window appears. You can search for useful Help and Support information. You can connect to the Internet and ask for assistance online.
Windows XP desktop 5 2 LG 1 3 1.[Start] button Click [Start] button to open the 4 [Start] menu. Click [All Programs] to open the list of programs installed in the computer. 2.[Start] menu [Start menu] shows everything you need to start working in the Windows XP environment. 3.Taskbar Taskbar shows programs that are currently open and running. 4.Taskbar icons and clock Taskbar icons show and let you power configure ongoing status, display properties, LAN settings, etc. 5.
Put your unused items and files in the and select Recycle Start [Empty Recycle Bin] to Recycle Bin. Right-click the Recycle Bin permanently delete the items inside the Bin. menu LG Pinned items My computer shows the drive and network information for your Control Panel lets computer the change settings in your you computer Recently used Changing the look of the Start items menu Right click [Start] button and select [Properties].
Control Panel The Windows XP Control Panel can display items in either View.
up Local Area Network Setting Local Area Network your home or connections provides high-speed network connection for When using Wireless LAN, refer to "Using Wireless LAN" (LAN) company. (LAN) connection (page 65). Attach LAN cable to the Ethernet (LAN) connector. Click [Start]->[Control Panel]->[Switch to Classic View]-> [Network Connections]. a Right-click a Local Area Connection and select -47- [Properties].
If the following window appears, click [General] tab and 1. Check if 3COM 3C920 Integrated Fast Ethernet Controller is installed in the computer 2. Then, check Internet Protocol, and 3. Click on [Properties] 1 2 3 Click on [General] tab, and Select [Obtain Click [Ok] when Internet an IP address protocol (TCP/IP) setting is automatically] completed. Note: Ask your network administrator for the appropriate IP settings.
Changing the Themes and Desktop background Using the Windows Classic Theme Click [Start]->[Control Panel]->[Switch to Classic View]->[Display]. Click [Themes] tab Select [Windows Classic] from the [Theme] drop down menu. Using a different theme 1. Click 2. 3. [Start]->[Control Panel]->[Switch to Classic View]->[Display]. Click [Themes] tab Select another theme from the [Theme] drop down menu.
the Changing desktop background Click [Start]->[Control Panel]->[Switch to Classic View]->[Display]. Click [Desktop] tab. (OR you can right click on the mouse while in desktop background. When a short cut menu pops up, choose [Properties] Scroll down the background. You [Background] drop down menu and select an image for the can also click [Browse] button and select an image you have saved. Setting the Screen Saver Click [Start]->[Control Panel]->[Switch Click [Screen Saver] tab.
unauthorized users. Taskbar programs and files that are currently open. If there are many programs running on the computer, the Taskbar group together files from the same program to prevent taskbar icons from cluttering up the Taskbar. Taskbar displays Desktop cleanup Desktop Cleanup Wizard Desktop Cleanup Wizard 1. 2. 3. Using runs unused every 60 desktop items to a folder. The days but you can also run it manually. Click [Start]->[Control Panel]->[Switch to Classic view] ->[Display].
Options Properties window, change the settings best suited for computing environment. In Power Power Click your Options Properties [Power Schemes] tab. Drop down the menu and select [Portable/Laptop] to set notebook PC with the appropriate power schemes. This includes detailed timeline for [Turn off monitor], [Turn off hard disks], [System standby], and [System hibernates]. Note: If the computer enters the battery power.
Power Options Properties Click [Alarms] tab. Check [Low battery alarm] and [Critical battery alarm], and move the sliders to set the power level to activate low battery alarm and critical battery alarm. be notified with Sound alarm Display message. You can also set the alarm action such as putting the computer into System standby mode or System hibernation mode. You can also run a specific program when the alarm goes off.
Advanced tab In Options, computer a you computer to prompt for password when from standby. You can also set the computer to enter can resumes set the power-saving mode when closing the display panel, pressing the switch or power the combination of Fn+F4. Power Meter You can click the Power Meter icon on the Taskbar to check the power level of your computer.
System Hibernation In Hibernate disable System hibernation mode and check the disk space needed for hibernation. tab, you can enable or Caution Do not remove the battery pack when the AC adapter is not connected to the computer. If you keep using the computer while low on the battery power, you may lose the data when the battery power goes out. If you are notified of low battery power, save your data and connect the AC adapter, or turn off the computer and change the battery pack.
Attaching external devices Attaching USB You mouse can a (not included) connect Attaching USB device a keyboard, hub, digital television using an camera S-Video and other devices that support USB. port Note: Below mentioned functions are not offered by each product *IEEE1394 / Wireless LAN / SD Memory card / S-Video port / IrDA Memory Stick 1.
2. Click [Start]->[Control Panel] -> [Display] [Advanced]. 3.
4. You also switch the main can display to and from TV and LCD by pressing the combination of Fn+F7. Note: You cannot display Attaching movie a an use switch the main or game on a display while playing TV and LCD at the a same game. You cannot time. external monitor Note: Turn off the computer before attaching an external monitor. An external VGA connector should be no wider than 17mm otherwise it will not fit in.
Attaching Note: Use a a printer standard parallel port connector that should be 16mm wide. Connectors wider than 17mm will not fit in. Printer Attach printer cable [Printers and Faxes].
If the following window In the Add Printer appears on the screen, click Wizard, follow the When the Add Printer Wizard appears on [Add a printer] instruction to set up a printer. completes setting the Printers and Faxes window.
Warning Do not overload Overloading an an electrical outlet with connections to electrical outlet may result in fire Do not touch the power cord Doing Using so or plug or multiple devices. electric shock. with wet hands. may result in electric shock S/PDIF output connector Using S/PDIF(Sony/Philips Digital Interface) output connector you can enjoy the digital sound by connecting S/PDIF supporting amplifier to the S/PDIF output connector.
Check Enjoy [Digital output] checkbox music after in the volume control. connecting A/V receiver, Digital amplifier, -62- MD with cable.
When enjoying Follow the DVD Player procedure as above. Set DVD payer program setting in compliance with digital output (Refer to [Help] on DVD player). Connect A/V receiver, or digital amplifier to S/PDIF by cable. Enjoy DVD 5.1 channel. same Note: 1. Check 2. 3. 4. Digital Output only when using S/PDIF supporting amplifier. When it is checked, you will not hear any sound with regular speakers. Notebook PC doesn't support analogue 5.1 channel amplifier. Use A/V receiver, or 5.
the IrDA Using port Your computer supports IrDA (Infrared Data Association) standard for infrared communication. About IrDA 1m Range: Beam port +-15 angle: Data transmission speed: Your computer has an 4.0 Mbps IrDA V3.0 Fast Infrared port allowing the data speed of Serial Infrared (115.2Kbps) and Fast Infrared (4Mbps). Transmission speed depends on programs and devices used transmission in IrDA communication.
The distance and the beam smaller than +-15 angle between the ports degrees respectively. must be less than 1m and Remove any obstruction between the ports. established, Wireless Link program starts automatically. appears on the taskbar, and shortcut to Wireless link is created 7. When the connection is Wireless Link icon on the desktop. Shortcut to Wireless link Wireless link icon 8. Double-click Wireless link icon the taskbar. Wireless Link windows opens. 9.
10. Click Yes to start a data transfer. The data transfer is complete. Note: The default directory for the received data is C:\Documents and Settings\ User Name\Desktop. To change the default directory, open Wireless Link and click Properties, and then choose a new default directory. Using You Wireless LAN can use Wireless LAN to connect to the network and your home and office. You can share files and folders without the use over attaching network cables to the computer.
Select AP(Access Point) [Connect]. you want to connect to and type necessary information. Click If you place the mouse pointer on the Wireless network icon see the status of the wireless network. Using IP on the Taskbar, you Operator everywhere by notebook. User access to network at the several places (Home, Office, and Vendor etc.) can save and modify the network environment (IP address, Domain, Workgroup).
If the following window drop down Type the a user menu appears, select LAN and type the computer or name High-Speed you use. appropriate at [Profile List] after making a decision whether belonging to [Domain], or a member of [Work Group]. Choose name is setting options as below. When setting [Obtain an IP address automatically], IP address, Subnet mask, Default Gateway windows automatically.
Using Battery Miser Battery Miser is the program to manage energy saving function makes the battery of notebook computer maximum. When using Battery Miser, it is available to use both original power management functions of Windows and the advanced power management functions of battery miser. For more detailed information, refer to [About Battery Miser] Double click icon on Desktop System tray. appears as below.
Battery alarm: If the battery power gets down for alarm is working. to low alarm, critical alarm, user can define the option Note: When pressing the keys Fn + F8, it keeps unused sound device power management(Sound device is always ON). When pressing one more, it return to the original set point. When pressing the keys Fn + F9, it keeps unused Monitor power management(Monitor is always ON). When pressing one more, it return to the original set point.
Input/Output Using The the keyboard About the The keyboard is used for keyboard keyboard is -- entering text and commands in the computer. 14.1inch composed of character, number, and other special function keys. keys: Function keys enable you the operating system and application perform different operations depending Function to on program you use.
Editing keys: You up and down the About the The can move is cursor to the beginning or end of the current line, or screen. keyboard keyboard the -- 15 inch composed of character, number, and other special function keys. keys: Function keys enable you the operating system and application perform different operations depending Function to on program you use.
up and down the screen. Character and number keys: consist of character keys, number keys, special character keys, and spacebar. Spacebar is used for creating a space between characters. Embedded numeric keys: You can press the combination of Fn and ScrLk enable the embedded numeric keys to keypad. Num Lock indicator lights up and enables you to use the embedded numeric keypad shown below. You can press the combination of Fn and ScrLk keys again to disable the embedded numeric keys.
Caution Do not and spill water, juice, coffee, cause an etc on the keyboard as it may damage the computer electric shock. Note: In the middle of entering characters, if numbers press the combination of Shift and ScrLk to Modifier and entered instead of characters, disable the embedded numeric keys. are special function keys 4 3 5 2 1 6 7 Shift key: Hold Shift key down and press another key to enter the upper case letter for the key.
PrtSc (Print Screen) key: visible Enter on your key: Shortcut program. screen and store it in Press Enter key key to take the snapshot of the the clipboard. Press PrtSc to enter a command or to end a entire area line. key: Press Shortcut menu key to view shortcuts for the current (Shortcut menu key works the same as the right-clicking the mouse menu button) Windows(R) key: Press Windows key to view the Start menu. LG Note: You can lock the keyboard key.
Hot keys following Hot keys provide you with shortcuts to operations, such adjusting the brightness of the computer display. The as Fn+F4: Force the computer to enter and power-saving mode. (ex: system standby hibernation) Fn+F5: Press the combination pad, and press again to enable the touch pad.
Using the touch pad 1 3 2 The touch pad can be used with button, which functions similar pad: used to a at the scroll wheel same 2. 3. Right button: functions similar to time. It has a scroll on a mouse. the pointer. Left button: used to select or click items. 1. Touch a mouse move to the right button on a mouse. Caution Guidelines using the touch pad Do not touch the touch pad with a sharp the touch pad.
the Moving Making To click on the screen finger on the touch pad and slide the pointer to move. Gently place you want pointer your the selection it in the direction in which (Click) button, quickly press and release the left button. You can click the left button or gently tap the touch pad once to select an item on a menu or an icon on the screen, or position the cursor in a document.
Double-click To double-click (Run) a button, quickly press and release the left button twice.You tap the touch pad twice to get the select and double-click the Drag and .exe same file or result. To launch an application, can you the program icon. drop object, select and move the object by clicking and holding the left button and sliding the finger across the touch pad without releasing the To drag an button. drop the object you have just dragged, release the left button.
. Drag: Move the icon without releasing the left button Drop: Release the left button above the recycle bin. ClickLock: enables you to select text or drag a file without having to continuously hold down the mouse button or touch pad button. Follow the instruction below to enable ClickLock. If ClickLock is pad button for a moment and then release it, and still get the same effect as continuously holding down the button.
Click Settings and adjust how long you need button to enable ClickLock, and then Select -81- to hold down OK.
Using the scroll up/down function Your computer supports scroll function. When cursor at the arrow does not move. using scroll function, Only the scroll function move. up/down function by pressing Fn + direction key. In a program window with a scroll bar, you can move up and down the windows using Fn + direction key.
System Setup The system setup saves your computer's hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. Starting the system setup Setting a password. (Page 83) Changing or removing the password. (Page 86) Recovering the factory default settings. (Page 87) Caution change the system setup arbitrarily. Incorrect system setup may result in errors while using the computer.
Note: Cursor control keys (arrow keys) the computer. When LG logo appears Turn move the cursor down, to the left and right. on The BIOS Setup Setting a Utility the screen, press F2. window appears. on password If you want to protect the system setup from the instructions below to set a password. You up, can set a password in the BIOS an unauthorized user, follow Setup Utility program.
Setting a supervisor password your computer from unauthorized users. The default setup does not have a password. A supervisor password A password protects prevents unauthorized Start the BIOS Use arrow keys users from factory changing the system setup. Setup Utility. to select Set Supervisor Password under Security menu, and then press Enter. Note: supervisor password to gain access and change items in the BIOS Setup Utility, and select Power on Boot.
Press F10 to If the the new settings. message appears, select Yes and press Enter to restart the computer. following Setting A save a user password password is a secondary compared to a supervisor password. supervisor password in order to set a power-on password. user set a Start the BIOS Use arrow keys Setup Utility and keys use arrow to select Security You must menu. to select Set User Password and press Enter.
If the following Press F10 to If the save following Changing message appears, press Enter. the new settings. message appears, select Yes and press Enter to restart the computer. or removing the password Start the BIOS Setup Utility, enter your password, and then press Enter. To change the password, follow the instruction on Setting a password. To remove the password, follow the instructions below.
Recovering If to the factory default settings accidentally modifies the system setup, follow the recover the factory default settings. a user instruction below Start the BIOS Use arrow Setup Utility, and use arrow keys to select Exit. keys to select Load Setup Defaults, and press Enter. If the following message default settings. Press F10 to If the save following the appears, select Yes and press Enter to new recover the factory settings.
System Recovery System Recovery offers to format the hard disk as shipping status of the product. User must make backup files to minimize a risk of losing data. Windows CD is provided with the product that offers system recovery contracted by Microsoft. Using To Full recover data Recovery hard disk completely, the computer. If Windows installation is you must make backup for all software and on Registration information" Press F11 with 2.
3. Select * In [Full Recovery without Format], or [Full Recovery after format]. the case of selecting [Full Recovery without Format].
[Recovering factory default] * In the appears. selecting [Full Recovery after format] Click [Start Recovery] case of .
"Formatting to NTFS" appears. When starting [Full Recovery], next procedures appears on the screen. If the following screen appears after restarting system, fill out Windows registration information. When clicking [Finish], the system returns to normal.
Driver re-installation the computer and go to [Start]-[All 2. Select the device driver you want to install. 1. Turn on 3. Follow the instructions to require Programs]-[LG GILJABI]. complete the installation. Some device drivers you to restart the computer after the installation.
Storage/Memory Using the optical disk drive Different model types provide different optical disk drives. (Some models have CD-ROM drives and others have CD-RW/DVD-ROM combo drives) Inserting Turn on a CD the computer, and press the eject button Place the CD in the middle of the tray. (Label -94- on on the CD-ROM drive.
Push the tray into the CD-ROM drive. Note: When you use the CD-ROM or CD-RW/DVD-ROM drive, place your computer a flat surface. The drive may not function correctly on an uneven surface. Your computer has therefore, the drive a CD-ROM drive with the may rattle when you first insert Be careful not to scratch the surface of Do not clean such as CD-ROM a Benzene or speed of or a CD-ROM or faster; CD. a or 24X CD-RW/DVD-ROM disk.
Playing Using You an audio CD Windows Media can use Player Windows(R) Media Player to play various types of audio and video files. play and make a copy of an audio CD, listen to the Internet radio broadcast, play movie clips, and listen to music or watch a video on a web site. If you have a DVD drive, you can play a DVD. If you have a CDRW drive, you can use Windows Media Player to make your own music CD. You can Starting Windows Media Player the computer.
Using 1. Power DVD Insert DVD title in the DVD-COMBO When the 2. following window As you insert the DVD opens, title, the drive, and close the tray. select Play DVD Play and click [Ok] DVD Auto-Resume window will open as shown preference and click [Ok]. If you check "Don't ask me this question not open next time automatically and play as you preferred. below. Set the again", 3. it will Power DVD will in the Help now menu play.
Note: If unchecked this question again", you will receive the message every time you open the Power DVD. If you delete the DVD title and play it again, you will also receive the preference window. You not on "Don't ask change the region possible to change. Be can me counter damage the system or remove 5th change, it is change the regional code. 5 times. After the cautious when you try to Do not open the DVD tray and may only the DVD title while it is still the DVD title. -98- playing.
Using an SD Your computer Note: Photo Inserting Memory can read from and write to images an SD an Memory Memory on Card / Memory place the Stick SD Memory Card / Memory Stick. may look different from the actual the computer, and Memory Card slot. Turn Card / SONY product. Stick SD Memory Card / Memory Stick in the SD Push the SD Memory Card / Memory Stick into the slot until it clicks. Removing 1. 2.
Installing When you memory memory using the computer, capacity. are you may want to increase the About memory Your computer uses DDR (Double Data Rate) SDRAM SO-DIMM (Dual InLine Memory Module) with 200 pins. Each memory socket can support a memory module from 64MB to 1024MB, and the maximum memory capacity of the computer is 2048MB. Before When installing memory installing or them to the static Make removing the memory modules, be careful electricity as it can damage the modules.
Caution PC2700/DDR SDRAM SO-DIMM 333MHz/266MHz/200MHz with FSB Frequency of 400MHz. Your computer supports Warning Before disassembling the computer for upgraing purposes, remove the power cord, phone line, and battery pack. There is the risk of electric shock contact the customer service for or turn off the power and fire. If you need to open the computer cover, help. Purchasing memory buy the correct type of memory modules for your computer.
Note: Before removing the cover, shut down your computer, remove AC adapter and battery pack, and detach any device or cable that are attached to the computer. the memory to make sure the memory aligns with the socket, and then inserts the memory into the socket at an angle of approximately 30 degrees. Use the notch on Note: Push down the memory until the latch firmly Push down the memory until you hear a secures click. -102- the memory on the socket.
Caution Use only the memory module sold by LG. Using other memory modules can damage your computer. Close the tighten the screw. After the installation, reboot the computer. If you see an error memory capacity, click F2 to enter the BIOS Setup Utility and cover and message save the regarding settings. Note: When rebooting the computer, make sure the size of installed correct. If different, re-install the memory module.
Features Model LM40/50, LS40/50 Processor Dothan Migration Note: The CPU cannot be equipped with a replaced upgraded by the user. The computer depending on the model type. or different CPU is Memory Built-in: 256MB DDR SDRAM SO-DIMM Maximum: 1024MB Memory Type: on each slot and 2048MB combined DDR SDRAM SO-DIMM (128MB, 256MB, 512MB, and 1024MB) BIOS ROM ROM: 8Mbit Storage devices 2.5-inch hard disk drive different depending on (The capacity of the hard disk drive the model type.
Note: The specification for the optical drive depends on the model type) External I/O Interfaces External monitor portr 25-pin parallel port PC Card slot Microphone jack Speaker/Headphone jack S/PDIF IrDA port 3 Universal Serial Bus RJ11 (USB) devices telephone port RJ45 Ethernet port IEEE 1394 port S-Video port Display Mobility Radeon 9200, ATI 9600 or 9700 Graphics Controller 4XAGP Video Memory: 32MB or 64MB XGA (1024X768) for 14.1 inch, SXGA+ for 15 inch.
Power AC specification Adapter (Free Voltage) Input: AC 100 240V, 1.6A, 50 Output: DC 18.5V, 3.5A, 65W ~ Note: Use the correct Battery Pack adaptor for your computer. (Li-Ion) DC 11.1V, 4400mAh Charging 60Hz ~ (6-cell) time with the power off in room 40 °C/ 49.28 ~104°F) Less than 32 hours with the power off in low temperature (0 9.6 °C/ 32 Less than 3 hours (6-cell) temperature (9.6 or 4 hours (9-cell) ~ ~ 49.
Operating environment Operating 10 35 ~ °C(50 95 ~ °F), 20 80% relative ~ humidity Non-operating -10 60 ~ °C(14 140 ~ °F), 10 80% relative ~ -107- humidity
