Owner's Manual

Pin layout for the lens iris output connector

No. DC type lenses VIDEO type lenses

1 Damping - Vcc (+9 V)

2 Damping + Not used

3 Drive + Video

4 Drive - Ground

Rewire the lens iris plug

1. Cut off the plug of the lens cable, cut off approxi-

mately 8 mm of the insulation, and then strip

approximately 2 mm of the ends of the cable

sheaths.

8mm

2mm

2. Solder the ends of the cable wires to the ends of

the pins, and then attach the cover of the lens iris

plug.

Mounting the Lens